Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Review Article

Research Status of Synthetic Oil Well Cement Retarder

Author(s): Guo Zihan, Liu Ziyang*, Liao Kai and Yang Xianghui

Volume 15, Issue 1, 2021

Published on: 10 July, 2020

Page: [53 - 59] Pages: 7

DOI: 10.2174/1872212114999200710144827

Price: $65

Abstract

Background: Oil well cement retarder is an additive that can extend time for thickening cement slurry, which can ensure the safety of cement. At present, the oil well cement retarder is mainly composed of synthetic materials, which are mainly divided into three major categories: compound polymer, AMPS polymer and non-AMPS.

Methods: In this paper, the research status of synthetic oil well cement retarder in recent years is reviewed, and its shortcomings and development trends are analyzed. It is pointed out that the shortage of synthetic retarder mainly lies in problems, including large temperature sensitivity, small temperature application range, abnormal thickening curve, great influence on high temperature settlement stability and cement stone strength development.

Conclusion: The development direction of oil well cement retarder is mainly focused on developing intelligent retarder and degradable retarder to meet the cementing needs of oilfields and ensure cementing effect increasing steadily.

Keywords: Oil well cement, admixture retarder, synthesis review, development direction, synthetic oil, compound polymer.

Graphical Abstract

[1]
R. Coskun, C. Soykan, and A. Delibas, "Study of free-radical copolymerization of itaconic acid/2-acrylamido-2-methyl-1-propanesulfonic acid and their metal chelates", Eur. Polym. J., vol. 42, no. 3, pp. 625-637, 2006.
[2]
X. Li, Z. Wang, and D. Chen, "Research progress of well cement retarder with high temperature-resistance capacity", Fine Specialty Chemicals, vol. 19, pp. 33-38, 2011.
[3]
S. Guo, Y. Bu, and Z. Shen, "The Effect of Synthesis Conditions on the Performance of Large Temperature Difference Retarder", Res. J. Appl. Sci. Eng. Technol., vol. 05, pp. 4751-4756, 2013.
[http://dx.doi.org/10.19026/rjaset.5.4314]
[4]
S. Guo, Y. Lu, Y. Bu, and B. Li, "Effect of carboxylic group on the compatibility with retarder and the retarding side effect of the fluid loss control additive used in oil well cement", In: R. Soc. Open Sci., vol. 5. no. 9, . 2018.180490
[http://dx.doi.org/10.1098/rsos.180490] [PMID: 30839713]
[5]
C. Zhao, C. Zhang, and H. Sun, "Development and application of the well cement retarder SD210L with a wide high temperature range", Natural Gas Industry, vol. 33, pp. 90-94, 2013.
[6]
B. Yang, J. Zhang, and L. Li, "Evaluation on MAM copolymer as oil well cement retarder", J. Chem. Indust. Eng., vol. 33, pp. 19-23, 2012.
[7]
J. Guo, J. Liu, and J. Yan, "Performance of New High Temperature Retarder HTR-200C for Oil-Well Cement", Tianjin Daxue Xuebao, vol. 45, pp. 529-533, 2012.
[8]
L.S. Eoff, and D. Buster, "High temperature synthetic cement retarder", In: paper SPE 28957 presented at the SPE International Symposlum on Oilfield Chemistry, San Antonio, TX: U.S.A, 1995.
[http://dx.doi.org/10.2118/28957-MS]
[9]
C. Tiemeyer, and J. Plank, "Working mechanism of a high temperature (200°C)synthetic cement retarder and its interaction with an AMPS03;‐based fluid loss polymer in oil well cement", J. Appl. Polym. Sci., vol. 123, pp. 4772-4781, 2012.
[10]
L.E. Brothers, D.W. Lindsey, and D.T. Terry, ”Set retarded cement compositions and methods for well cementing”.U.S.Patent 4941536 1990
[11]
L. Zhang, J. Zhuang, and H. Liu, "Terpolymerization and performance of 2-acrylamide-2-methyl propane sulfonic acid/itaconic acid/N-vinyl-2-pyrrolidone", J. Appl. Polym. Sci., vol. 117, pp. 2951-2957, 2010.
[http://dx.doi.org/10.1002/app.32222]
[12]
S. Yan, Y. Guang, and Z. Shang, "Preparation of and Performance Evaluation on Oil Well Cement Slurry Retarder HN-1", Adv. in Fine Petrochemicals, vol. 13, pp. 5-7, 2012.
[13]
S. Yan, C. Zhang, and Y. Guang, "Synthesis and Performance Evaluation of the New High-temperature Oil Cement Retarder (HN-2)", Chem. Intermediates, vol. 10, pp. 45-50, 2012.
[14]
Z. Hu, T. Ye, and Q. Wang, "Laboratory synthesis and evaluation of a new high-temperature retarder PC-H42L", Changjiang Daxue Xuebao. Ziran Kexue Ban, vol. 09, pp. 73-74, 2012.
[15]
W. Hong, J. Lin, X. Li, L. Wei, L. Yin, G. Liu, R. Lu, S. Yang, and H. Xie, "“Synthesis and evaluation of AMPS/AA/IA/NNDAM quaternary copolymer retarder”, West-Chin", Explor.Eng., vol. 29, pp. 69-73, 2017.
[16]
W. Fu, Research and application of medium and high temperature retarder for oil well cement., Northeast Petrol. Univ., 2017.
[17]
Y. Shi, Synthesis and property research of new polymer retarder., Tianjin University, 2016.
[18]
K.A. Rodrigues, Set retarded cement compositions, additives and methods...U.S.Patent 5536311 1996
[19]
Li Yong, Cao Zhi, and Luo Yang, High temperature resistant oil well cement retarder and preparation method thereof..CHN.patent, 101967371A 2011
[20]
J. Liu, Q. Yan, and Y. Mao, "Synthesis and application of cement retarder glycine di (methylene phosphonic acid)", New Building Materials, vol. 4, pp. 38-40, 2012.
[21]
S. Yan, G. Jin, and B. Wang, "etc. “Studies on the Synthesis And Retarding Properties Of Grafting Modification Starch”, Special", Petrochem., vol. 30, pp. 55-58, 2013.
[22]
S. Yan, S. Li, G. Jin, F. Wang, and L. Yumei, "The Synthesis of and Study on AA/SSS/APO Terpolymer Retarder", Drilling Fluid & Completion Fluid, vol. 32, pp. 81-83, 2015.
[23]
H. Zhang, J. Zhuang, and S. Huang, "Synthesis and performance of itaconic acid/acrylamide/sodium styrene sulfonate as a self-adapting retarder for oil well cement", RSC Advances, vol. 5, pp. 55428-55437, 2015.
[http://dx.doi.org/10.1039/C5RA05167C]
[24]
Y. Lu, Synthesis and Properties of Temperature Resistant Oil Well Cement Retarder., Southwest Petroleum University, 2017.
[25]
L.E. Brothers, High temperature set retarded cement compositions and methods..U.S.Patent 5484478 1996
[26]
S. Yuhuan, "Cong Ma, and Wanrong, etc Bu, “Experimental Study on the Composite Retarder for MPC", In: Petroleum Drilling Tech., vol. 41. 2013, pp. 14-19.
[27]
X. Wang, L. Sang, and S. Zhou, "Lab Research on DZH-3:an Ultra-High-Temperature Retarder", Petroleum Drilling Tech., vol. 37, pp. 22-25, 2009.
[28]
Z. Liang, Z. Jia, and H. Li, "etc. “Study on a Novel Retarder CMPAI Used in HTHP Oil Well", Chemical Eng. Oil & Gas., vol. 38, pp. 331-334, 2009.
[29]
D. Chen, Z. Yu, and Z. Ying, "etc. “Research on Wide Temperature Zone Retarder Used in Long Cementing Segment", Drilling Fluid & Completion Fluid., vol. 20, pp. 63-65, 2012.
[30]
G.V. Barlet, H. Hendriks, and P. Maroy, High temperature retarders for oil field cements, cement slurries and corresponding cementing processes..U.S.Patent 5503672 1996
[31]
E.F. Vinson, L.E. Brothers, and D.L. Bour, High temperature set retarded well cement compositions and methods..U.S.Patent 4997487March 05 1991
[32]
B.R. Reddy, D.W. Gray, and B.K. Waugh, Methods of cementing in subterranean for mantions.U.S.Patent 6978835, 2005
[33]
J. Liu, Synthesis of polymer additives and their applicate in oil well cement., Tianjin University, 2012.
[34]
R. Amorin, P.O. Appau, and E. Osei, "Evaluation of blended lime-stabilised spent synthetic-based drilling mud and cement for oil well cementing operations", Advances in Geo-Energy Research, vol. 3, no. 2, pp. 141-148, 2019.
[http://dx.doi.org/10.26804/ager.2019.02.03]
[35]
L.E. Brothers, and T.J. Pisklak, Set-delayed cement compositions comprising pumice and associated methods.” .U.S. Patent Application No. EP2822314B1 2012
[36]
M. Murtaza, "Experimental Investigation of the Impact of Modified Nano Clay on the Rheology of Oil Well Cement Slurry", Int. Petroleum Technol. Conf., 2019
[http://dx.doi.org/10.2523/IPTC-19456-MS]
[37]
Saeed Salehi, "Study and Use of Geopolymer mixtures for Oil and Gas well cementing applications", J. Energy Resource Technol., vol. 140, no. 1, p. 012908, 2018.
[http://dx.doi.org/10.1115/1.4037713]
[38]
J.V. Anaele, "Alternative Utilization of Sawdust for Oilfield Chemical Additive (Cement Retarder) Production: A Case Study of Local Cement", Int. J. Sci. Eng. Investig. (IJSEI), vol. 8, no. 85, pp. 33-37, 2019.
[39]
E.Q. Contreras, "Novel Aromatic Polyamides and its Application in Enhancing the Integrity of Oil Well Cement Sheath", In: SPE/IADC International Drilling Conference and Exhibition, The Hague, The Netherlands, 2019.
[http://dx.doi.org/10.2118/194118-MS]
[40]
R.R. Suppiah, "Uniaxial compressive strength of geopolymer cement for oil well cement", J. Pet. Explor. Prod. Technol., pp. 1-4, 2019.
[41]
V.G. Boncan, K.C. Madsen, and R.F. Lukay, Multi-Purpose Tube for Oil Well Cement Testing.U.S. Patent No. 16/229,987
[42]
A. Mohammed, and C. Vipulanandan, "Magnetic Field Strength and Temperature Effects on the Behavior of Oil Well Cement Slurry Modified with Iron Oxide Nanoparticles and Quantified with Vipulanandan Models", J. Test. Eval., vol. 48, no. 6, 2019.
[43]
M. Inayat, S.A. Sulaiman, and J.C. Kurnia, "Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: parametric optimization via Box Behnken Design", J. Energy Institute, vol. 92, no. 4, pp. 871-882, 2019.
[http://dx.doi.org/10.1016/j.joei.2018.08.002]
[44]
V. Aarathi, "Synthesis and characterisation of rubber seed oil trans-esterified biodiesel using cement clinker catalysts", Int. J. Sustain. Energy, vol. 38, no. 4, pp. 333-347, 2019.
[http://dx.doi.org/10.1080/14786451.2017.1414052]
[45]
S. Bechar, and D. Zerrouki, "Effect of natural pozzolan on the fresh and hardened cement slurry properties for cementing oil well", Mil. Oper. Res., vol. 15, no. 4, pp. 513-519, 2018.
[http://dx.doi.org/10.1108/WJE-10-2017-0337]
[46]
C. Vipulanandan, "Characterizing Smart Cement Modified with Styrene Butadiene Polymer for Quality Control, Curing and to Control and Detect Fluid Loss and Gas Leaks Using Vipulanandan Models", In: Offshore Technology Conference, Houston, USA, 2019.
[http://dx.doi.org/10.4043/29581-MS]
[47]
M. Ahdaya, and A. Imqam, "Fly ash Class C based geopolymer for oil well cementing", J. Petrol. Sci. Eng., vol. 179, pp. 750-757, 2019.
[http://dx.doi.org/10.1016/j.petrol.2019.04.106]
[48]
O-A. Larki, "A new formulation for lightweight oil well cement slurry using a natural pozzolan", Adv. Geo-Energy Res., vol. 3, no. 3, pp. 242-249, 2019.
[http://dx.doi.org/10.26804/ager.2019.03.02]
[49]
B.R. Reddy, Settable, form-filling loss circulation control compositions comprising in situ foamed calcium aluminate cement systems and methods of using them.U.S. Patent No. 10/259,985
[50]
B.R. Reddy, Loss circulation compositions (LCM) having portland cement clinker..U.S. Patent No. 10/414,967
[51]
D.P. Zielinski, and M.K. Jeffries, Polyisocyanurate based cement for wellbore fluid loss prevention.U.S. Patent No. 15/760,337
[52]
M.R. Dousti, Y. Boluk, and V. Bindiganavile, "The effect of cellulose nanocrystal (CNC) particles on the porosity and strength development in oil well cement paste", Constr. Build. Mater., vol. 205, pp. 456-462, 2019.
[http://dx.doi.org/10.1016/j.conbuildmat.2019.01.073]
[53]
A. Al-Yami, Dispersant in cement formulations for oil and gas wells..U.S. Patent No. 16/202,600
[54]
Y. Lu, M. Li, and Z. Guo, "A novel high temperature retarder applied to a long cementing interval[J]", RSC Adv., vol. 6, no. 17, pp. 14421-14426, 2016.
[55]
P. Zhigang, Z. Jian, and F. Qian, "Synthesis and retarder mechanism study of a novel amphoteric composite high temperature-resistant retarder for oil well cement. [J]", RSC Advances, vol. 8, no. 27, pp. 14812-14822, 2018.
[http://dx.doi.org/10.1039/C8RA01139G]
[56]
X.J. Xia, J.T. Guo, and S.Q. Liu, "Development of Functional Polymer as Oil-Well Cement Retarder. [J]", Mater. Sci. Forum, vol. 814, pp. 191-198, 2015.
[http://dx.doi.org/10.4028/www.scientific.net/MSF.814.191]
[57]
T. He, F. Shen, and F. Wang, "“Influences of combination of superplasticizers and retarders on process of cement hydration[J]”, Kuei Suan Jen Hsueh Pao/J", Chin. Ceramic Soc., vol. 35, no. 6, pp. 796-800, 2007.
[58]
C.H. Yang, F. Wu, and K. Chen, "Research on Set Retarder of High and Super High Strength Alkali -Activated Slag Cement and Concrete. [J]", Key Eng. Mater., vol. 477, pp. 164-169, 2011.
[http://dx.doi.org/10.4028/www.scientific.net/KEM.477.164]
[59]
R. Zhang, J.H. Huo, and Z.G. Peng, "Investigation of Poly(AM/AMPS/MA) on the Retarding Performance of Oil Well Cement. [J]", Appl. Magn. Reson., vol. 47, no. 9, pp. 987-1001, 2016.
[http://dx.doi.org/10.1007/s00723-016-0814-4]
[60]
X. Xia, J. Guo, and D. Chen, "Hydrophobic associated copolymer as a wide temperature range synthetic cement retarder and its effect on cement hydration. [J]", J. Appl. Polym. Sci., vol. 134, no. 35, 2017.e45242
[http://dx.doi.org/10.1002/app.45242]
[61]
Z. Yue, L. Sha, and J. Wang, "Summary on Characteristics and Development of High Temperature Oil Well Cement Retarder. [J]", Drilling Fluid & Completion Fluid, vol. 28, no. S1, pp. 54-58, 2011.
[62]
S. Jun, "Application performance of oil well cement retarder QR-300C [J]", Chem.Eng. Oil Gas.
[63]
Zhigang Qi, "Preparation And Performance of an Itaconic Acid/2-Acrylamido-2-Methylpropanesulfonic Acid Bipoymer Retarder For Oil Well Cement[J]", Special. Petrochem., vol. 26, no. 02, pp. 44-47.
[64]
J. Liu, W. Ye, and S. Li, "Synthesis and Evaluation of Ultra-high Temperature Retarder ZH-8 for Oil Well Cement. [J]", Drilling Fluid & Completion Fluid, vol. 28, no. 3, pp. 53-55, 2011.
[65]
C. Zhao, C. Zhang, and H. Sun, "Development and application of the well cement retarder SD210L with a wide high temperature range [J]", Natural Gas Ind., no. 01, pp. 97-101, 2013.
[66]
Rujun Su, and Qingzhong Li, "Study and application of high temperature retarder GH-9 for cement slurry[J]", Drilling Fluid & Completion Fluid, no. B05, pp. 89-92, 2005.
[67]
L. Sang, Q. Wang, and Z. Yan, "Laboratory Evaluation and Application of a High-temperature Cement Retarder [J]", Drilling Fluid & Completion Fluid, no. 06, pp. 50-52+88, 2006.
[68]
Z. Ying, X. Liang, and L. Qin, "Synthesis of a high temperature retarder LY and the application in low density cement. [J]", Chem. Ind. Eng. Prog., vol. 34, no. 8, pp. 3124-3127, 2015.
[69]
Z. Lin, "“Research on Synthesis and Property of Retarder for Oilwell Cement Slurries [J]”, J", Wuhan Uni. Technol., vol. 9, no. 1, pp. 303-322, 2020.
[70]
L. Ya, L. Ming, and Y. Yan, "Synthesis and Performance Evaluation of a Cement Retardant AID for Oil Well. [J]", Petrol. Dril. Tech., vol. 43, no. 6, pp. 40-45, 2015.
[71]
S. Yan, S. Yang, and H. Zhang, "Synthesis and Performance of Retarder HL-1 for High Temperature Cementing [J]", Oilfield Chem., no. 03, pp. 5-9, 2015.
[72]
W. Dong, Z. Jia, and Y. Ma, "“Terpolymerization and Retardation of A High Temperature Cement Retarder Poly 2-Acrylamido-2-Methyl Propane Sulfonic Acid/Sodium Styrene Sulfonate/Itaconic Acid for Oil Well [J]”, J", Chinese Ceramic Soc., vol. 05, pp. 79-86, 2012.
[73]
Z. Rui, "Synthesis and Characterization of Retarder HJH-1 Used in High Temperature Oil Well Cement [J]", Fine Chem., vol. 32, no. 9, 2015.
[74]
C. Li, and D. Yao, "Research and Application of CT11-3 Oil Well Cement Retarder [J]", Oilfield Chem., vol. 3, pp. 220-223, 1998.
[75]
L. Ya, "Advances in Polymer-based Oil Well Cement Retarder. [J]", Chin. Plastics Ind., vol. 44, no. 2, pp. 23-26, 2016.
[76]
J. Zou, J. Qu, and Y. Xu, "Developments of Retarders for Oil Well Cementing Compositions [J]", Oilfield Chem., vol. 04, pp. 92-96, 2008.
[77]
Z. Liang, Z. Jia, and H. Li, "Study on a Novel Retarder CMPAI Used in HTHP Oil Well [J]", Chemic. Eng. Oil Gas, no. 04, pp. 71-74, 2009.
[78]
Y. Xie, Z. Peng, and F. Qian, Laboratory study on oil well cement retardant PQ of ultra- high temperature tolerance., J. Drilling Fluid & Completion Fluid, 2003, p. 6.
[79]
L. Bin, S. Zhang, and G. Wu, "Study on New Oil Well Cement Retarder Able to Inhibit Abnormal Thickening of Cement Slurry. [J]", Drilling Fluid & Completion Fluid, vol. 34, no. 5, pp. 67-72, 2017.
[80]
Hongke Wang, Ye Wang, and Jianxia Jin, "A Quadripolymer Cementing Slurry Retarder for High Temperature Operation [J]", Drilling Fluid & Completion Fluid, no. 33, p. 92, 2016.
[81]
Changyong Zhong, and Duojun Liu, "Novel oil well cement retarder [J]", Oilfield Chem., no. 01, pp. 89-93, 1984.

Rights & Permissions Print Cite
Article Metrics
38
1
© 2024 Bentham Science Publishers | Privacy Policy