Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Research Article

Modeling and Simulation for Multiple Damage Progression of Tank-to- Engine Fuel Feed System

Author(s): Li Wenjuan*, Liu Haiqiang and Zhang Bo

Volume 13, Issue 5, 2020

Page: [751 - 757] Pages: 7

DOI: 10.2174/2352096512666190920094432

Price: $65

Abstract

Background: A centrifugal vane pump driven by a three-phase AC motor is a key component for modern equipment. Therefore, its condition directly affects the operating and safety performance of the system. Modeling and simulation are effective methods for the system analysis.

Methods: A mathematical model of a Tank-to-Engine Fuel Feed System (T-EFFS) is designed based on its phased-mission behavior and structure redundancy. Both of the damage modes that arise frequently in a given type of system are tracked: the fuel feed pump seal damage due to fatigue and the vane damage due to corrosion. Then, a multiple degradation T-EFFS model is established to simulate the fuel pressure at the system outlet under different damage modes. The morphological spectrum decrement index is used to describe the damage of the system.

Results: The results show that the T-EFFS model can describe the phased-mission behavior of the system and meet the requirement of the fuel flow rate for the entire mission profile. Then, the decrease in the fuel pressure of the T-EFFS with the cumulative effects of vane damage and crack growth under different behavior modes is simulated along its life span.

Conclusion: This work aims to provide a model and data support for a subsequent investigation. The results can be used to fit the health background curve of the system, predict the performance degradation trend of the system at given life points, and further evaluate its remaining service life.

Keywords: AC motor, centrifugal pump, phased-mission, modeling and simulation, seal damage, vane corrosion.

Graphical Abstract
[1]
C.S. Kallesøe, "Fault Detection and Isolation in Centrifugal Pumps", Doctoral Dissertation of Aalborg University , 2005.
[2]
M. Daigle, and K. Goebel, "Multiple damage progression paths in model-based prognostics", IEEE Aerospace Conference, Big Sky, MT, USA, 2010, pp. 1-10.
[3]
C. Ai, Y. Huang, H. Wang, and G. Gu, "“Research on the operating performance of an Inverter-driven cryogenic induction motor for a submerged LNG pump", Transact. China Electrotech. Soc., vol. 30, no. 14, pp. 138-145, 2015.
[4]
R. Breda, and V. Beno, "Modeling of control circuit of aircraft fuel system." "Przeglad Elektrotechniczny", 2013.
[5]
A. Dheedan, "Online safety monitor based on a safety assessment model and Hierarchical deployment of a multiagent system", Inter. J. Adv. Internet Technol., . , pp. 95-113, 2012.
[6]
L. Boyd, "Active Valve Valve Technology: Modeling and Control of Variable-speed Trim Transfer Pumps in Aircraft Fuel Systems",.Doctoral Dissertation of Bath University , 2008
[7]
R. Deodath, J. Jhingoorie, and C. Riverol, "Direct methanol fuel cell system reliability analysis", Int. J. Hydrogen Energy, vol. 42, no. 16, pp. 12032-12045, 2017.
[http://dx.doi.org/10.1016/j.ijhydene.2017.03.144]
[8]
X.Y. Wang, "Aircraft Fuel System Prognostics and Health Management",.Available at: , http://dspace.lib.cranfield.ac.uk/handle/1826/7214
[9]
Boeing Company, "Boeing Training Manual", Chapter, 28-Fuel, 2001.
[10]
R. Langton, C. Clark, M. Hewitt,; "Aircraft Fuel Systems", John Wiley and Sons Ltd., 2009.
[11]
A.H. Solis, "Diagnosis of Centrifugal Pumps",.Master Dissertation of Royal Institute of Technology, , pp. 25-632006.
[12]
M. Taktak, and S. Triki, "Real time algorithm based on time series data abstraction and hybrid bond graph model for diagnosis of switched system", Eng. Appl. Artif. Intell., vol. 59, no. 5, pp. 51-72, 2017.
[http://dx.doi.org/10.1016/j.engappai.2016.12.009]
[13]
H. Towsyfyan, F. Gub, and A.D. Ball, "Modelling acoustic emissions generated by tribological behaviour of mechanical seals for condition monitoring and fault detection", Tribol. Int., vol. 125, no. 5, pp. 46-58, 2018.
[http://dx.doi.org/10.1016/j.triboint.2018.04.021]
[14]
J.T. Burns, "Fatigue crack propagation of aerospace aluminum alloy 7075-T651 in high altitude environments", Int. J. Fatigue, vol. 106, pp. 196-207, 2018.
[http://dx.doi.org/10.1016/j.ijfatigue.2017.09.017]
[15]
P. Radziszewski, and A. Moore, "Understanding the Effect of pressure profile on stirred mill impeller wear", Miner. Eng., vol. 103-104, pp. 54-59, 2016.
[http://dx.doi.org/10.1016/j.mineng.2016.08.013]
[16]
T. Fang, and G. Biswas, "PHM Integration with maintenance and inventory management systems", IEEE Aerospace Conf. Big Sky, MT , pp. 5-6.
[17]
I.M. Hutchings, Tribology: Friction and Wear of Engineering Materials., 2nd ed CRC Press: Boston, USA, 1992.
[18]
J. Ghafouri, K.H. Farid, and K.H. Amin, "dynamic modeling of variable speed centrifugal pump utilizing matlab/simulink", Sci. Eng. Invest., vol. 5, pp. 1-7, 2012.
[19]
P. Shetty, D. Mylaraswamy, and T. Ekambaram, "A hybrid prognostic model formulation system identification and health estimation of auxiliary power units", IEEE Aerospace Conf. Big Sky, MT, USA , 2006, pp. 2-5.
[http://dx.doi.org/10.1109/AERO.2006.1656089]
[20]
G. Levitin, M. Finkelstein, and Y.S. Dai, "Redundancy optimization for series-parallel phased mission systems exposed to random shocks", Reliab. Eng. Syst. Saf., vol. 167, pp. 554-560, 2017.
[http://dx.doi.org/10.1016/j.ress.2017.07.006]
[21]
E.T. Turgut, "Fuel flow analysis for the cruise phase of commercial aircraft on domestic routes", Aerosp. Sci. Technol., vol. 37, pp. 1-9, 2014.
[http://dx.doi.org/10.1016/j.ast.2014.04.012]
[22]
Aircraft Design Manual Committee, Aircraft Design Manual., Beijing, China, 2006, pp. 293-294.
[23]
T. Gusha, "Fault detection and location in a microgrid using mathematical morphology and recursive least square methods", Electrical Power & Energy Systems, vol. 102, pp. 324-331, 2018.
[http://dx.doi.org/10.1016/j.ijepes.2018.04.009]

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy