Generic placeholder image

Current Nanomaterials

Editor-in-Chief

ISSN (Print): 2405-4615
ISSN (Online): 2405-4623

General Research Article

Synthesis and Study of Fluorescent Forest-like Carbon Nanotubes Doped with Oxides of Rare-earth Elements

Author(s): Patsy Y.A. Guillén, Oxana V. Kharissova*, Romeo Selvas and Boris I. Kharisov

Volume 4, Issue 1, 2019

Page: [39 - 50] Pages: 12

DOI: 10.2174/2405461504666190510122723

Abstract

Background: Methods for obtaining the hybrids of multi-wall carbon nanotubes (MWCNTs) and rare earths are in progress. Such composites may possess luminescent properties, which could be of interest for various areas, in particular, medicine (imaging), engineering (fluorescent polymers, LED and relative materials), among other applications. Lanthanide oxides, additionally, can serve as catalysts for MWCNTs formation and catalysts of several organic reactions.

Objective: The goal of this work is to obtain the composites of MWCNTs with strontium aluminate, doped with several lanthanides (Eu, Ce, La, Nd, and Sm), via the spray pyrolysis method and to study the properties of the formed hybrids.

Methods: The spray pyrolysis method in the temperature range from 780 to 850oC, starting from toluene as a carbon source and ferrocene as a catalyst precursor. SrAl12O19 doped with rare-earths were added to carbon matter in the ultrasonic field.

Results: Among various structures, the forest-like nanostructures have been observed in some cases. The formed coated carbon nanotubes possess fluorescent properties due to the attachment of lanthanide- doped ceramic compound (SrAl12O19) to their surface, allowing the emission control for each dopant: yellow (Nd2O3), blue (Eu2O3 and Sm2O3), intense orange (La2O3), light orange (Ce2O3).

Conclusion: MWCNTs decorated with strontium aluminate (SrAl12O19), doped with a series of lanthanide oxides (Nd2O3, Eu2O3, La2O3, Ce2O3, Sm2O3), were obtained by the spray pyrolysis technique on the surface of optical fibers. Lanthanum- and cerium-containing coatings were found to show a better deposition on the MWCNTs surface, exhibiting uniform coating. MWCNTs, coated with Nd-, Ce-, and Eu-doped SrAl12O19 were shown to reveal the best conductive properties.

Keywords: Carbon nanotubes, strontium aluminate, rare-earth dopants, transmission electron microscopy (TEM), fluorescence, spray pyrolysis.

Graphical Abstract
[1]
Avti PK, Sitharaman B. Luminescent single-walled carbon nanotube-sensitized europium nanoprobes for cellular imaging. Int J Nanomedicine 2012; 7: 1953-64.
[2]
Wolfbeis OS. An overview of nanoparticles commonly used in fluorescent bioimaging. Chem Soc Rev 2015; 44(14): 4743-68.
[3]
Kong L, Tang J, Liu J, Wang Y, Wang L, Cong F. Fluorescent nanoblocks of lanthanide complexes on nano silicon dioxide and carbon nanotube donors with ligand–antenna integration (ALI) structure. Mater Sci Eng C 2009; 29(1): 85-91.
[4]
Maggini L, Mohanraj J, Traboulsi H, et al. A Luminescent Host–Guest Hybrid between a EuIII Complex and MWCNTs. Chemistry A Eur J 2011; 17(31): 8533-7.
[5]
Paterson AS, Raja B, Garvey G, et al. Persistent luminescence strontium aluminate nanoparticles as reporters in lateral flow Assays. Anal Chem 2014; 86(19): 9481-8.
[6]
Shi D, Lian J, Wang W, Ewing RC, et al. Luminescent carbon nanotubes by surface functionalization. Adv Mater 2006; 18(2): 189-93.
[7]
Hemraj-Benny T, Banerjee S, Wong SS. Interactions of lanthanide complexes with oxidized single-walled carbon nanotubes. Chem Mater 2004; 16(10): 1855-63.
[8]
Song J-l, Zhao J-h, Zheng J-f, Zhu Z-p. Formation of carbon nanotubes catalyzed by rare earth oxides. N Carbon Mater 2013; 28(3): 191-8.
[9]
Syamimi NF, Amin Matori K, Lim WF, Abdul Aziz S, Zaid M, Hafiz M. Effect of sintering temperature on structural and morphological properties of europium(III) oxide doped willemite. J Spectrosc 2014.
[10]
Singh V, Zhu JJ, Tiwari M, et al. Characterization, luminescence and EPR investigations of Eu2+ activated strontium aluminate phosphor. J Non-Cryst Solids 2009; 355(50-51): 2491-5.
[11]
Angappan S, Berchmans LJ, Augustin CO. Sintering behaviour of MgAl2O4 a prospective anode material. Mater Lett 2004; 58(17-18): 2283-9.
[12]
Aghazadeh M, Golikand AN. Ghaemi, Yousefi T. La2O3 nanoplates prepared by heat-treatment of electrochemically grown La(OH)3 nanocapsules from nitrate medium. J Electrochem Soc 2011; 158(12): 136-41.
[13]
Feng J, Liu T, Xu Y, Zhao J, He Y. Effects of PVA content on the synthesis of LaFeO3via sol–gel route. Ceram Int 2011; 37(4): 1203-7.
[14]
Periyat P, Laffir F, Tofail SAM, Magner E. A facile aqueous sol–gel method for high surface area nanocrystalline CeO2. RSC Advances 2011; 1(9): 1794-8.
[15]
Dhamale GD, Mathe VL, Bhoraskar SV, Sahasrabudhe SN, Ghorui S, Ghorui S. Synthesis and characterization of Nd2O3 nanoparticles in a radiofrequency thermal plasma reactor. Nanotechnology 2016; 27(8): 085603.
[16]
Tomova A, Gentile G, Grozdanov A, et al. Functionalization and characterization of MWCNT produced by different methods. Acta Phys Pol A 2016; 129(3): 405-8.
[17]
Hung CM. Synthesis, characterization and performance of CuO/La2O3 composite catalyst for ammonia catalytic oxidation. Powder Technol 2009; 196(1): 56-61.
[18]
Turky G, Dawy M. Spectral and electrical properties of ternary (TeO2–V2O5–Sm2O3) glasses. Mater Chem Phys 2003; 77(1): 48-59.
[19]
Zhai Y, Zhang S, Pang H. Preparation, characterization and photocatalytic activity of CeO2 nanocrystalline using ammonium bicarbonate as precipitant. Mater Lett 2007; 61(8-9): 1863-6.
[20]
Fathi Z, Nejad RAK, Mahmoodzadeh H, Satari TN. Investigating of a wide range of concentrations of multi-walled carbon nanotubes on germination and growth of castor seeds (Ricinus communis L.). J Plant Prot Res 2017; 57(3): 228-36.
[21]
Francis AP, Ganapathy S, Palla VR, Murthy PB, Ramaprabhu S, Devasena T. One time nose-only inhalation of MWCNTs: exploring the mechanism of toxicity by intermittent sacrifice in Wistar rats. Toxicol Rep 2015; 2: 111-20.
[22]
Pan TM, Yu TY, Wang CC. High-k Nd2O3 and NdTiO3 charge trapping layers for nonvolatile memory metal-SiO2-high-k-SiO2-silicon devices. J Electrochem Soc 2008; 155(10): 218-23.
[23]
Quesada A, del Campo A, Fernández JF. Stabilization of cubic phase in dense Eu2O3 ceramics. Mater Lett 2015; 157: 77-80.
[24]
Ruiz-Gómez MA, Gómez-Solís C, Zarazúa-Morín ME, et al. Innovative solvo-combustion route for the rapid synthesis of MoO3 and Sm2O3 materials. Ceram Int 2014; 40(1): 1893-9.
[25]
Xiao H, Ai Z, Zhang L. Nonaqueous sol− gel synthesized hierarchical CeO2 nanocrystal microspheres as novel adsorbents for wastewater treatment. J Phys Chem C 2009; 113(38): 16625-30.

© 2024 Bentham Science Publishers | Privacy Policy