Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
General Research Article

Design of Insertion Mechanism with Friction Wheels for Cannula Flexible Needle Based on TRIZ

Author(s): Yan-Jiang Zhao*, Ji-Chao Yang, Yong-De Zhang, Jia Liu, Zhi-Qing Liu and Ze-Hua Liu

Volume 14, Issue 2, 2020

Page: [250 - 261] Pages: 12

DOI: 10.2174/1872212113666190329234536

Price: $65

Abstract

Background: Flexible needle insertion is one of the minimally invasive surgeries, which takes advantage of the lateral force acted on the bevel tip to make the needle shaft bend when inserted into the tissue. The bending makes the needle avoid the obstacles (like bones, veins, nerves, etc.) in order to reach the target. However, the traditional flexible needle neither can change its curvature of the path, nor can realize a precise control because of the torsional friction between the needle and the tissue. Hence, a cannula flexible needle was proposed to overcome the drawbacks, which consists of a cannula and a stylet. Also, there is a need of an insertion mechanism for the cannula flexible needle in robot-assisted surgery.

Objective: The aim of this paper is to innovatively design an insertion mechanism with friction wheels for the cannula flexible needle, which is used as an end-effector in robot-assisted surgery system. The mechanism is supposed to realize the coordinated driving of the cannula and the stylet in order to achieve variable curvatures of paths.

Methods: Making references of the patents and research papers on needle insertion mechanisms, and based on the requirement of degree of freedom for the cannula flexible needle insertion, the insertion mechanism for the cannula flexible needle is designed by using the TRIZ theory. The conflicts matrix analysis, the invention principles and the substance-field analysis are used to innovatively design the driving scheme and the synchronous motion mechanism.

Results and Conclusion: In this paper, the concrete structure design of the insertion mechanism for the cannula flexible needle is achieved, which is compact and simple. The friction coefficient between the needle and the wheels, and the pretightening force between both wheels are calculated through the data from experiments. The insertion accuracy of friction wheel mechanism is tested and analyzed through experimentation. The results show that the maximum placement error of the needle executed by the insertion mechanism is less than 0.5 mm, which meets the demands of surgical operations.

Keywords: Cannula flexible needle, insertion mechanism, mechanical design, TRIZ, friction-wheel mechanism, insertion accuracy.

Graphical Abstract

[1]
Z.Q. Ni, T.M. Wang, and D. Liu, "A review of the development of human medical miracles", J. Mech. Eng., vol. 51, no. 13, pp. 45-52, 2015.
[2]
P. Moreira, and S. Misra, "Biomechanics-based curvature estimation for ultrasound-guided flexible needle steering in biological tissues", Ann. Biomed. Eng., vol. 43, no. 8, pp. 1716-1726, 2015.
[http://dx.doi.org/10.1007/s10439-014-1203-5] [PMID: 25465619]
[3]
Y. Ai, B. Pan, Y.L. Fu, and S.G. Wang, "Design of a novel robotic system for minimally invasive surgery", Ind. Rob., vol. 44, no. 3, pp. 288-298, 2017.
[http://dx.doi.org/10.1108/IR-07-2016-0181]
[4]
Z.J. Du, W. Wang, W.D. Wang, and W. Dong, "Preoperative planning for a multi-arm robot-assisted minimally invasive surgery system", Simulation, vol. 93, no. 10, pp. 853-867. 2017.
[http://dx.doi.org/10.1177/0037549717719336]
[5]
B. Zhang, F.X. Chen, M. Yang, L.X. Huang, Z.J. Du, L.N. Sun, and W. Dong, "Real-time curvature detection of a flexible needle with a bevel tip", Sens., vol. 18, no. 7, p. 2057, 2018.
[http://dx.doi.org/10.3390/s18072057] [PMID: 29954135]
[6]
Y.D. Zhang, W.X. Zhang, Y. Liang, and Y. Xu, "Research on mechanism and strategy of high accuracy puncture of prostate", Chin. J. Sci. Instrum., vol. 38, no. 6, pp. 1405-1412, 2017.
[7]
R.J. Webster III, J.S. Kim, N.J. Cowan, G.S. Chirikjian, and A.M. Okamura, "Nonholonomic modeling of needle steering", Int. J. Robot. Res., vol. 25, no. 5-6, pp. 509-525, 2006.
[http://dx.doi.org/10.1177/0278364906065388]
[8]
K.B. Reed, A.M. Okamura, and N.J. Cowan, "Controlling a robotically steered needle in the presence of torsional friction", In ; 2009 IEEE International Conference on Robotics and Automation Kobe, Japan, pp. 3476-3481, 2009.
[http://dx.doi.org/10.1109/ROBOT.2009.5152749]
[9]
R.J. Webster, J. Memisevic, and A.M. Okamura, "Design considerations for robotic needle steering", In , Proceedings of the 2005 IEEE International Conference on Robotics and Automation Barcelona, Spain, pp. 3599-3585, 2005.
[10]
Z.J. Tegels, "Ultrasound assisted needle puncture mechanism".U. S. Patent 2014/0276081, , September 18, 2014.
[11]
J. Xiong, Z.Y. Xia, Z.J. Gan, Y. Liu, and H.S. Liang, "A vertical mobile puncture robot".CN Patent 105411653,, December 18, 2016.
[12]
Y.J. Zhao, D.B. Wang, Y.D. Zhang, W.Q. Wu, R.X. Wang, H.L. Hu, and L. Huang, "An insertion mechanism for cannula flexible needle".CN Patent 205083582,, March 16, 2016.
[13]
M. Paul, P. Philippe, T. Jocelyne, "Automatic robotic steering of flexible needles from 3D ultrasound images in phantoms and ex vivo biological tissue", Ann. Biomed. Eng., vol. 46, no. 9, pp. 1385-1396, 2018.
[http://dx.doi.org/10.1007/s10439-018-2061-3] [PMID: 29845413]
[14]
R. Monfaredi, I. Iordachita, E. Wilson, R. Sze, K. Sharma, A. Krieger, S. Fricke, and K. Cleary, "Development of a shoulder-mounted robot for MRI-guided needle placement: phantom study", Int. J. Comput. Assist. Radiol. Surg., vol. 13, no. 11, pp. 1829-1841, 2018.
[http://dx.doi.org/10.1007/s11548-018-1839-y] [PMID: 30099660]
[15]
J. Ghelfi, A. Moreau-Gaudry, N. Hungr, C. Fouard, B. Véron, M. Medici, E. Chipon, P. Cinquin, and I. Bricault, "Evaluation of the needle positioning accuracy of a light puncture robot under MRI guidance: results of a clinical trial on healthy volunteers", Tech. Vasc. Interv. Radiol., vol. 14, no. 1, pp. 1428-1435, 2018.
[http://dx.doi.org/10.1007/s00270-018-2001-5]
[16]
J. Chevrie, N. Shahriari, M. Babel, A. Krupa, and S. Misra, "Flexible Needle Steering in Moving Biological Tissue with Motion Compensation using Ultrasound and Force Feedback", IEEE Robot. Autom. Lett., vol. 3, no. 3, pp. 2338-2345, 2018.
[http://dx.doi.org/10.1109/LRA.2018.2809484]
[17]
J. Zachary, "Ultrasound assisted needle puncture mechanism".U. S. Patent 13,795,551, Sep 18, 2014,
[18]
P.T. Chen, "Puncture needle device and method of using the same". U. S. 9033952B2, May 19, 2015.
[19]
S. Onishi, and M. Jokaji, "Puncture needle and puncture device".U.S. Patent 2013/0018405, January 17, 2013.,
[20]
J. Zeng, Z.W. Chen, and D.H. Zhu, "Puncture needle holder".U. S. Patent 8,430,889 , B2, Apr 30, 2013.
[21]
C. Spreafico, and D. Russo, "TRIZ Industrial Case Studies: A Critical Survey", Procedia CIRP., vol. 39, pp. 51-56, 2016.
[http://dx.doi.org/10.1016/j.procir.2016.01.165]
[22]
S. Filippi, and D. Barattin, "Exploiting TRIZ tools in interaction design", Procedia Eng., vol. 131, pp. 71-85, 2015.
[http://dx.doi.org/10.1016/j.proeng.2015.12.349]
[23]
J.Y. Zhang, and J.Q. Cao, "TRIZ and its application in industrial design", Adv. Mat. Res., vol. 194-196, pp. 1892-1895, 2011.
[http://dx.doi.org/10.4028/www.scientific.net/AMR.194-196.1892]
[24]
G. Caligiana, A. Liverani, D. Francia, L. Frizziero, and G. Donnici, "Integrating QFD and TRIZ for innovative design", J. Adv. Mec. Des., vol. 11, no. 2, pp. 1-15, 2017.
[25]
D. Francia, G. Caligiana, A. Liverani, L. Frizziero, and G. Donnici, "PrinterCAD: a QFD and TRIZ integrated design solution for large size open moulding manufacturing", Int. J. Interact. Des. Manuf, pp. 1-14. 2017
[http://dx.doi.org/10.1007/s12008-017-0375-2]
[26]
S.C. Pin, F. Haron, S. Sarmady, A.Z. Talib, and A.T. Khader, "Applying TRIZ principles in crowd management", Saf. Sci., vol. 49, no. 2, pp. 286-291, 2011.
[http://dx.doi.org/10.1016/j.ssci.2010.09.002]
[27]
L. Chechurin, and Y. Borgianni, "Understanding TRIZ through the review of top cited publications", Comput. Ind., vol. 82, pp. 119-134, 2016.
[http://dx.doi.org/10.1016/j.compind.2016.06.002]
[28]
K.M. Shi, Y.D. Zhang, Y.J. Zhao, W.Q. Wu, S.J. Guo, and Y. Yu, "A novel design of insertion mechanism for cannula flexible needle applied in minimally invasive surgery", Recent Pat. Eng., vol. 12, no. 3, pp. 215-222, 2018.
[http://dx.doi.org/10.2174/1872212112666171221130432]
[29]
Y.J. Zhao, W.Q. Wu, Y.D. Zhang, R.X. Wang, J.C. Peng, and Y. Yu, "3D dynamic motion planning for robot-assisted cannula flexible needle insertion into soft tissue", Int. J. Adv. Robot. Syst., vol. 13, no. 3, pp. 1-11, 2016.
[http://dx.doi.org/10.5772/64199]

Rights & Permissions Print Cite
Article Metrics
24
1
© 2024 Bentham Science Publishers | Privacy Policy