Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Review Article

Research Status of 3-D Finite Element Simulation of Metal Cutting

Author(s): Meng Liu* and Guohe Li

Volume 12, Issue 2, 2018

Page: [103 - 111] Pages: 9

DOI: 10.2174/1872212111666170925162435

Price: $65

Abstract

Background: The finite element method (FEM) has been widely applied in the research of metal machining which can improve the efficiency and reduce the cost of research. 3-D finite element simulation attracts more attention on the research of mechanism and parameter optimization of high-speed machining.

Methods: This paper reviews the theses of 3-D finite element simulation in recent years, especially focuses on the key technology of FEM. Some application examples of 3-D finite element simulation in milling, turning and drilling are summarized. The differences of different types of simulation are compared and analyzed and the characters are concluded. In the end, the exiting problem and development direction of 3-D finite element simulation are also discussed. Besides, a lot of patents on 3D finite element simulation for metal machining were studied.

Results: The key technology of FEM determines the accuracy of 3-D finite element simulation. And the finite element simulation of different types of processing can be realized by setting different contact and boundary conditions.

Conclusion: FEM provides a new approach for the study of mechanism of metal machining. In order to improve the accuracy of 3-D finite element simulation, many researches focus on the improvement of the finite element model. The prediction results of finite element simulation can provide guidance for the parameter optimization of metal machining and the optimum design of tool. And the 3-D finite element simulation is hoped to be more accuracy and efficiency.

Keywords: Metal cutting, 3-D, finite element simulation, key technology, milling, turning, drilling.

Graphical Abstract

[1]
H.B. Wu, Y.L. Ke, G. Liu, Q.L. Cheng, and Y.B. Bi, "Three-dimensional numerical simulation for high speed milling of aerospace aluminum alloy", J. Zhejiang Univ. Eng. Sci.. vol. 42, pp. 234-238, Feb 2008.
[2]
B. Rao, C.R. Dandekar, and Y.C. Shin, "An experimental and numerical study on the face milling of Ti-6Al-4V alloy: Tool performance and surface integrity", J. Mater. Process. Tech.. vol. 211, pp. 294-304, Jan 2011.
[3]
R. Li, and A.J. Shih, "Finite element modeling of 3D turning of titanium", Int. J. Adv. Manuf. Technol.. vol. 29, pp. 253-261, Feb 2006
[4]
Q.Y. Zhang, M. Li, and L.C. Xi, "Milling force model and influencing factors of 6061 aluminum alloy in high-speed milling", Manuf. Tech. Mach. Tool. vol. 4, pp. 100-102, Apr 2014.
[5]
C.K. Wang, C.M. Peng, D. Lu, and X.H. Zhong, "Milling Simulation and Distortion Forecast of Aerometal 7075-T7451 Thin-walled Workpiece", Manuf. Tech. Mach. Tool. vol. 8, pp. 87-90, Aug 2010.
[6]
T. Thepsonthi, and T. Özel, "3-D finite element process simulation of micro-end milling Ti-6Al-4V titanium alloy: Experimental validations on chip flow and tool wear", J. Mater. Process. Technol.. vol. 221, pp. 128-145, Feb 2015.
[7]
Y. Yang, C.H. Li, and J. Sun, "Three-dimensional numerical simulation of cutting force during milling of titanium alloy Ti6Al4V", J. Basic Sci. Eng.. vol. 18, pp. 493-502, June 2010.
[8]
Z. S. Chen, A surface processing method for quenched steel. CN Patent 102990085A, 2013.
[9]
M. Batista, A. Morales, A. Gómez-Parra, J. Salguero, F.J. Puerta, and M. Marcos, "3D-FEM based methodology for analysing contour milling processes of Ti alloys", Prod. Eng.. vol. 132, pp. 1136- 1143, Dec 2015.
[10]
S. Kalpakjian, Manufacturing processes for engineering materials.Addison-Wesley, . 1997.
[11]
H. Qiu, X.X. Ban, L.Q. Ji, and M.Y. Wang, "Study on simulation and experiment of cutting force in high speed cutting GCr15", Modul. Mach. Tool. Autom. Manuf. Tech. vol. 4, pp. 154-157, Apr 2016.
[12]
Z.Y. Zhang, G.D. Chen, and T. Wang, "Study on the milling force and milling temperature for end milling of aluminum alloy 7055", Mach. Des. Manuf. vol. 6, pp. 75-78, June 2014.
[13]
Y. Yang, Y.L. Ke, and H.Y. Dong, "Constitutive model of aviation aluminum-alloy material in metal machining", Chin. J. Nonferrous Met.. vol. 15, pp. 854-859, June 2005.
[14]
Q.L. Cheng, Y.L. Ke, and H.Y. Dong, "“Simulation of high-speed milling process of aerospace aluminum alloy”, J. Zhejiang Uni", Eng. Sci.. vol. 40, pp. 113-117, Jan 2006.
[15]
X.L. Fu, X. Ai, Z.Q. Liu, and Y. Wan, "Study on shear angle model of aluminum alloy 7050-T7451 in high speed machining", Chin. Mech. Eng. vol. 18, pp. 220-224, Jan 2007.
[16]
Z.Y. Cao, N. He, L. Li, and W.M. Zhu, "Chip formation and its numerical simulation in high speed cutting of Ti6Al4V alloy", Chin. Mech. Eng. vol. 19, pp. 2450-2454, Oct 2008.
[17]
T. Özel, M. Sima, A.K. Srivastava, and B. Kaftanoglu, "“Investigations on the effects of multi-layered coated inserts in machining Ti-6Al-4V alloy with experiments and finite element simulations”, CIRP Ann.-", Manuf. Tech. vol. 59, pp. 77-82, June 2010.
[18]
M. Calamaz, D. Coupard, and F. Girot, "A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V", Int. J. Mach. Tools Manuf.. vol. 48, pp. 275-288, Apr 2008.
[19]
C.Y. Wang, F. Ding, D.W. Tang, L.J. Zheng, S.Y. Li, and Y.X. Xie, "Modeling and simulation of the high-speed milling of hardened steel SKD11 (62 HRC) based on SHPB technology", Int. J. Mach. Tools Manuf.. vol. 108, pp. 13-26, 2016.
[20]
G.S. Wang, B. Hou, Z.Q. Yu, and S.H. Li, "The numerical simulation for high-speed cutting of aluminum alloy based on bcj model", Mach. Des. Res. vol. 27, pp. 91-93, June 2011.
[21]
Y. H. Feng, J. L. Wan, T. Gong, C. H. Xu, H. Sun, and F. M. Li, Method of cutting hardened 45 steel with alumina based composite ceramic cutters under micro lubrication. CN Patent 104227025A, 2014.
[22]
Y.Y. Hu, S.M. Fei, M.L. Wang, J.M. Zuo, and J. Wang, "Modeling and simulation of high speed machining temperature field based on finite element analysis", J. Syst. Simu. vol. 21, pp. 7091- 7095, Nov 2009.
[23]
F.J. Zerilli, and R.W. Armstrong, "Dislocation-mechanics-based constitutive relations for material dynamics calculations", J. Appl. Phys.. vol. 61, pp. 1816-1825, Mar 1987.
[24]
Y.Q. Guo, H. Jiang, and X.C. Wang, "Research on contact friction in sheet forming numerical simulation", Chin. J. Mech. Eng.. vol. 40, pp. 174-177, June 2004.
[25]
W. Deng, "Finite element analysis of orthogonal machining high-strength wear-resisting aluminum bronze", Chin. J. Mech. Eng.. vol. 40, pp. 71-75, Feb 2004.
[26]
G. Barrow, W. Graham, T. Kurimoto, and Y.F. Leong, "Determination of rake face stress distribution in orthogonal machining", Int. J. Mach. Tool Des. Res. vol. 22, pp. 75-85, Nov 1982.
[27]
H.Y. Dong, Y.L. Ke, and Q.L. Cheng, "“Finite element simulation and analysis of aluminum alloy three-dimensional milling”, J. Zhejiang Uni", Eng. Sci.. vol. 40, pp. 759-762, May 2006.
[28]
L. Filice, F. Micari, S. Rizzuti, and D. Umbrello, "A critical analysis on the friction modeling in orthogonal machining", Int. J. Mach. Tools Manuf.. vol. 47, pp. 709-714, Mar 2007.
[29]
H. Zamani, J.P. Hermani, B. Sondereggera, and C. Sommitsch, "3D simulation and process optimization of laser assisted milling of Ti6Al4V", Pro. CIRP. vol. 8, pp. 75-80, Nov 2013.
[30]
T. Özel, "The influence of friction models on finite element simulations of machining", Int. J. Mach. Tools Manuf.. vol. 46, pp. 518- 530, May 2006.
[31]
Q.L. Liu, Machining method of support ring. CN Patent 106346223 A, 2017.
[32]
T. Özel, and T. Altan, "Determination of workpiece flow stress and friction at the chip-tool contact for high-speed cutting", Int. J. Mach. Tool Manu.. vol. 40, pp. 133-152, Jan 2000.
[33]
H.B. Wu, Z.X. Jia, G. Liu, Y.B. Bi, and H.Y. Dong, "“Finite element modeling of Ti6Al4V alloy high speed cutting”, ", J. Zhejiang Uni. ( Eng. Sci.). vol. 44, pp. 982-987, May 2010.
[34]
Z.T. Tang, Z.Q. Liu, and X. Ai, "Experimentation on the superficial residual stresses generated by high-speed milling aluminum alloy", Chin. Mech. Eng. vol. 19, pp. 699-703, Mar 2008.
[35]
G. Fang, L.P. Lei, and P. Zeng, "Criteria of metal ductile fracture and numerical simulation for metal forming", Chin. J. Mech. Eng.. vol. 38, pp. 21-25, Dec 2002.
[36]
K. Iwata, K. Osakada, and Y. Terasaka, "Process modeling of orthogonal cutting by the rigid-plastic finite element method", J. Eng. Mater. Technol.. vol. 106, pp. 132, June 1984.
[37]
N. Ahmed, A.V. Mitrofanov, V.I. Babitsky, and V.V. Silberschmidt, "3D finite element analysis of ultrasonically assisted turning", Comput. Mater. Sci.. vol. 39, pp. 149-154, Jan 2007.
[38]
M.A. Elbestawi, A.K. Srivastava, and T.I. El-Wardany, "“A model for chip formation during machining of hardened steel”, CIRP Ann.-", Manuf. Tech. vol. 45, pp. 71-76, June 1996.
[39]
Z.H. Qing, D.W. Zuo, D.H. Yang, X.B. Lei, and F. Xu, "Research on hardened 42CrMo saw-tooth chip by trial with spring type quick-stop device", Chin. Mech. Eng. vol. 27, pp. 308-314, Feb 2016.
[40]
G. Zhan, L. He, and H.W. Jiang, "Influence of fracture criterion on numerical simulation results", Modul. Mach. Tool. Autom. Manuf. Tech. vol. 4, pp. 16-20, Apr 2016.
[41]
P.A. Du, "Principle of meshing in finite element modeling", Mach. Des. Manuf. vol. 1, pp. 34-36, Feb 2000.
[42]
A.J. Shih, "Finite element analysis of orthogonal metal cutting mechanics", Int. J. Mach. Tools Manuf.. vol. 36, pp. 255-273, Feb 1996.
[43]
W.F. Noh, CEL: A Time-Dependent, Two-Space-Dimensional, Coupled Eulerian-Lagrange Code.Configuration, . 1963
[44]
J. Donea, S. Giuliani, and J.P. Halleux, "An arbitrary lagrangian-eulerian finite element method for transient dynamic fluid-structure interactions", Comput. Methods Appl. Math.. vol. 33, pp. 689-723, Jan 1982.
[45]
T. Belytschko, D.P. Flanagan, and J.M. Kennedy, "Finite element methods with user-controlled meshes for fluid-structure interaction", Comput. Methods Appl. Math.. vol. 33, pp. 669-688, Jan 1982.
[46]
A. Mamedov, and I. Lazoglu, "Thermal analysis of micro milling titanium alloy Ti-6Al-4V", J. Mater. Process. Technol.. vol. 229, pp. 659-667, 2016.
[47]
M. Mahnama, and M.R. Movahhedy, "Prediction of machining chatter based on FEM simulation of chip formation under dynamic conditions", Int. J. Mach. Tools Manuf.. vol. 50, pp. 611-620, July 2010
[48]
A. Shrot, and M. Bäker, "Determination of Johnson-Cook parameters from machining simulations", Comput. Mater. Sci.. vol. 52, pp. 298-304, Jan 2012.
[49]
Y.M. Arısoy, and T. Özel, "Prediction of machining induced microstructure in Ti-6Al-4V alloy using 3-D FE-based simulations: Effects of tool micro-geometry, coating and cutting conditions", J. Mater. Process. Technol.. vol. 220, pp. 1-26, 2015.
[50]
G.G. Ye, S.F. Xue, W. Ma, M.Q. Jiang, Z. Ling, X.H. Tong, and L.H. Dai, "Cutting AISI 1045 steel at very high speeds", J. Mater. Process. Technol.. vol. 56, pp. 1-9, Jan 2012.
[51]
Z.G. Rong, L. Jiao, X.Y. He, and Y.B. Qian, "The finite element analysis and simulation of turning based on ABAQUS", Mach. Tool Hydraulics. vol. 37, pp. 233-236, May 2009.
[52]
Y. H. Feng, J. Y. Zhang, L. Wang, W. Q. Zhang, X. Kong, and Y. Tian, A method of dry cutting 45 steel with different morphologies and micro textured ceramic tools in situ formation. CN Patent 106964786A, 2017.
[53]
H.F. Wang, T. Xiao, and W.G. Wu, "Finite element simulation on cutting temperature during turning Ti-6Al-4V", Mach. Des. Manuf. vol. 9, pp. 48-50, Sept 2012.
[54]
Y. Huang, O. Di, and Y.F. Li, "Finite element simulation of turning aluminum alloy 2A12 based on Deform-3D", Machinery. vol. 54, pp. 41-43, June 2016.
[55]
Y.B. Bi, Q. Fang, H.Y. Dong, and Y.L. Ke, "Research on 3D numerical simulation and experiment of cutting temperature for high speed milling of aerospace aluminum alloy", Chin. J. Mech. Eng.. vol. 46, pp. 160-165, Apr 2010.
[56]
M.H. Wang, J.G. Wang, Y.H. Zheng, S.Y. Li, and L. Gao, "Finite element simulation and analysis of titanium alloy under high-speed milling", Mech. Sci. Tech. Aero. Eng. vol. 34, pp. 898-902, June 2015.
[57]
L.L. Zeng, L.P. Zhou, and J.Z. Zhang, "Research of new double-edged indexable ball-end mill design and machining simulation analysis", Mach. Tool Hydraulics. vol. 44, pp. 71-75, Sept 2016.
[58]
M. Nouari, G. List, F. Girot, and D. Géhin, "Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminum alloys", Int. J. Mach. Tools Manuf.. vol. 45, pp. 1436-1442, Dec 2005.
[59]
M. Abouridouane, F. Klocke, and D. Lung, "Microstructure-based 3d finite element model for micro drilling carbon steels", Pro. CIRP. vol. 8, pp. 94-99, Aug 2013.
[60]
X.X. Xu, Y.X. Hu, Y.F. Sun, and Z.Q. Yao, "Finite element simulation for thin-panel drilling process with ANSYS/LS-DYNA", Mach. Des. Res. vol. 28, pp. 85-89, Feb 2012.
[61]
H.X. Zhu, X.Q. Shen, and L.X. Zhang, "The simulation of temperature field and tool wear in the near-dry deep hole drilling", Mach. Des. Manuf. vol. 2, pp. 193-195, Feb 2014.
[62]
X.M. Jia, Q.Y. Li, and H.Q. Zhang, "Experimental research and drilling simulation of small-diameter twist drill", Mach. Des. Manuf. vol. 2, pp. 139-142, Feb 2015.

Rights & Permissions Print Cite
Article Metrics
24
3
© 2024 Bentham Science Publishers | Privacy Policy