Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Review Article

Review on Main Drive Torsional Vibration and Roller Coupling Vibration of Rolling Mill

Author(s): Xiao Bin Fan*, Bin Zhao, Yu Jiang and Bing Xu Fan

Volume 15, Issue 3, 2021

Published on: 21 April, 2020

Page: [301 - 313] Pages: 13

DOI: 10.2174/1872212114999200421150533

Price: $65

Abstract

Background: Rolling mill vibration has become one of the most widespread and unsolved problems in the rolling industry, which is called "Ghost" vibration. The research on the starting mechanism, vibration characteristics and vibration suppression measures of high-speed tandem rolling mill has always been a hotspot and difficult point in the field of rolling at home and abroad. However, up to now, the research on rolling mill vibration has not formed a relatively complete and widely accepted theoretical system, experimental means and solutions. In production, vibration is often controlled by experience and test, which has a high cost and low efficiency.

Methods: In this paper, the research history and achievements of vibration phenomena, vibration mechanism, the stability of the rolling process and vibration control theory of high-speed tandem rolling mill in recent years are summarized. The aim is to reveal the mechanism of rolling mill vibration in the continuous rolling process, the mechanism of rolling mill non-linear vibration instability and its changing law, and to explore the optimization of rolling process and the control method of rolling mill structure so as to improve the rolling process.

Results: The evolution of non-linear random torsional / bending vibration and its transfer mechanism to the space coupling vibration of the roll system, the unsteady dynamic friction characteristics of the rolling interface and the mechanism of induced roll chatter, and the non-linear random dynamic behavior of the space coupling vibration of the roll system are revealed.

Conclusion: The stability of the rolling process can realize the research and development of highend products considering the stability of the rolling process, and also provide a reference for further research by industry experts.

Keywords: Rolling mill, vibration, nonlinearity, stability, coupling, torsional vibration.

Graphical Abstract

[1]
W. Ma, F. Li, J. Wang, and S. Xiong, "Modelling and Validation of vertical vibration with 6 degrees of freedom for 4-high hot strip mill stand", Zhongguo Jixie Gongcheng, vol. 22, no. 24, pp. 2962-2965, 2011.
[2]
Y. Zhang, X. Yan, and Q. Ling, "Research on torsional vibration of main drive system under multi-source excitation in csp rolling mill", Jixie Gongcheng Xuebao, vol. 53, no. 10, pp. 34-42, 2017.
[http://dx.doi.org/10.3901/JME.2017.10.034]
[3]
Y. Li, and W. He, "Analysis of self-excited vibration on main drive system of billet mill", J. Wuhan Uni. Sci. Technol., vol. 33, no. 3, pp. 303-306, 2010.
[4]
P. Shi, K. Xia, L. Bin, and D. Hou, "Non-main resonance characteristics of nonlinear torsional vibration of rolling mill’s multi-degree-of-freedom main drive system", J. Vib. Shock, vol. 34, no. 12, pp. 35-41, 2015.
[5]
Y. Shen, H. Liu, and X. Jie, "du guojun. “Analysis of chaotic behavior of the main drive system with clearance of a heavey plate mill", Eng. Mech., vol. 27, no. 7, pp. 232-236, 2010.
[6]
C. Gao, and Z.Z. Du Guojun, "Torsional Vibration analysis of the main drive system of a rolling mill with impact of multi-clearance", Jixie Gongcheng Xuebao, vol. 50, no. 3, pp. 130-136, 2014.
[http://dx.doi.org/10.3901/JME.2014.03.130]
[7]
L. Meng, H. Wu, J. Wang, and M. Lei, "Non-linear twist vibration of main transmission system of vertical rolling mill", J. Cent. South Univ., vol. 40, no. 5, pp. 1288-1293, 2009. [Natural Science Edition].
[8]
Y.A. Amer, "A. T. EL-Sayed, F. T. El-Bahrawy. “Torsional vibration reduction for rolling mill’s main drive system via negative velocity feedback under parametric excitation", J. Mech. Sci. Technol., vol. 29, no. 4, pp. 1581-1589, 2015.
[http://dx.doi.org/10.1007/s12206-015-0330-8]
[9]
X. Fan, Y. Zang, F. Wang, and K. Jin, "Hot strip mill nonlinear torsional vibration with multi-stand coupling", J. Vibroeng., vol. 17, no. 4, pp. 1623-1633, 2015.
[10]
A. Naka, and K. Ohashi, "Method of suppressing and controlling torsional vibration of shaft of rolling mill", JP2011115825A, 2009.
[11]
X. Yan, Y. Li, and Z. Sun, "Torsional vibration suppression device for rolling mill", CN102755994A, 2011.
[12]
S. He, L. Tang, and C. Zhu, "Control system for suppressing impact speed drop and torsional oscillation of rolling mill transmission system", CN100441328C, 2006.
[13]
D. Hou, L. Bin, P. Shi, and L. Shuang, "Bifurcation of piecewise nonlinear roll system of rolling mill", J. Vibr. Shock, vol. 29, no. 12, pp. 132-135, 2010.
[14]
Q. Wang, Q. Wang, F. Min, C. Feng, and Z. Yong, "Vibration Mechanism Analysis And Vibration Test Of High-Speed Aluminum Strip Rolling Mill", Mech. Sci. Technol. Aerospace Eng., vol. 32, no. 12, pp. 1850-1854, 2013.
[15]
Y. Sun, H. Xiao, and J. Xu, "Nonlinear vibration characteristics of a rolling mill system considering the roughness of rolling interface", J. Vib. Shock, vol. 36, no. 8, pp. 113-120, 2017.
[16]
M. Mosayebi, F. Zarrinkolah, and K. Farmanesh, "Calculation of stiffness parameters and vibration analysis of a cold rolling mill stand", Int. J. Adv. Manuf. Technol., vol. 91, no. 2, pp. 4359-4369, 2017.
[http://dx.doi.org/10.1007/s00170-017-0026-6]
[17]
R. Mehrabi, M. Salimi, and S. Ziaei-Rad, "Finite element analysis on chattering in cold rolling and comparison with experimental results", J. Manuf. Sci. Eng., vol. 137, no. 6, pp. 1-9, 2015.
[http://dx.doi.org/10.1115/1.4030379]
[18]
S.A. Elahi, and M.R. Forouzan, "Increasing the chatter instability speed limit in cold strip rolling using wavy layered composite plates as a damper", Thin-walled Struct., vol. 137, pp. 19-28, 2019.
[http://dx.doi.org/10.1016/j.tws.2018.12.004]
[19]
X. Fan, Z. Yong, and H. Wang, "Research on vertical vibration of hot rolling mill", Zhongguo Jixie Gongcheng, vol. 21, no. 15, pp. 1801-1804, 2010.
[20]
X. Fan, Y. Zang, and K. Jin, "Research on strip hysteretic behavior and mill vertical vibration system nonlinear dynamics", Appl. Phys., A Mater. Sci. Process., vol. 122, no. 10, pp. 1-12, 2016.
[http://dx.doi.org/10.1007/s00339-016-0410-3]
[21]
D. He, W. Tao, and H. Xu, "A kind of ripple rolling mill roll system vibration detection control device and control method", CN110449469A, 2019.
[22]
Z. Wu, Z. Chong, and H. Dan, "A kind of external vibration simulation experiment porch of asymmetrical rolling", CN110523783A, 2019.
[23]
L. Bin, J. Jiang, L. Fei, H. Liu, and L. Peng, "Compensative Vibration Model of Roll System Based on Horizontal Vibration of Rolled Piece", Acta Meteorol. Sin., vol. 39, no. 1, pp. 56-60, 2018.
[24]
Z. Ming, P. Yan, J. Sun, and Z. Yang, "Horizontal vibration in hot tandem rolling mill considering asymmetric movement of upper and lower work rolls", J. Cent. South Univ., vol. 48, no. 12, pp. 3239-3247, 2017. [Science and Technology].
[25]
H. Furumoto, S. Kanemori, and K. Hayashi, "Enhancing technologies of stabilization of mill vibration by mill stabilizing device in hot rolling", Procedia Eng., vol. 81, pp. 102-107, 2014.
[http://dx.doi.org/10.1016/j.proeng.2014.09.134]
[26]
X. Fan, Z. Yong, and H. Wang, "Research on hot rolling mill horizontal vibration", Iron & Steel, vol. 45, no. 9, pp. 62-66, 2010.
[27]
X. Fan, Y. Zang, Y. Sun, and P. Wang, "Impact analysis of roller system stability for four-high mill horizontal vibration", Shock Vib., vol. 2016, pp. 1-10, 2016.
[http://dx.doi.org/10.1155/2016/5693584]
[28]
R. Peng, C. Gong, W. Shuai, and X. Feng, "Study on coupling vibration mechanization and characteristics of multi-degree-of-freedom cold rolling mill", Forg. Stamp.Technol., vol. 42, no. 10, pp. 119-126, 2017.
[29]
Q. Ling, Q. Zhao, W. Xian, and Y. Kang, "Work roll horizontal-vertical nonlinear vibration characteristics and suppression of hot strip tandem mills", Zhongguo Jixie Gongcheng, vol. 28, no. 16, pp. 1943-1950, 2017.
[30]
S. Rong, Z. Jing, P. Yan, L. Bin, S. Wang, and L. Wei, "Mill vertical-torsion coupling dynamic vibration analysis based on experimental study", J. Exper. Mech., vol. 27, no. 3, pp. 319-325, 2012.
[31]
G. Shen, and Y. Zheng, "Three-dimensional vibration characteristic of 4-h plate rolling mill", J. Mech. Eng., vol. 51, no. 19, pp. 60-65, 2015.
[http://dx.doi.org/10.3901/JME.2015.19.060]
[32]
J. Jiang, "Research on nonlinear torsional and vertical vibration model and characteristic of Strip Mill, D.S. thesis", Yanshan university, qinhuangdao, China, 2012.
[33]
X. Liu, Z. Yong, Z. Gao, and L. Zeng, "Multidirectional regenerative chatter model of tandem rolling mills and its application", J. Cent. South Univ., vol. 48, no. 3, pp. 635-643, 2017. [Science and Technology].
[34]
X. Yan, A. Yao, and K. Liu, "Research on The effect of hydraulic bending roll on the vibration of hot continuous rolling mill", J. Vib. Shock, vol. 35, no. 11, pp. 41-46, 2016.
[35]
L. Zeng, Z. Yong, and Z. Gao, "study on overall coupled modeling of the rolling mill", Jixie Gongcheng Xuebao, vol. 51, no. 14, pp. 46-53, 2015.
[http://dx.doi.org/10.3901/JME.2015.14.046]
[36]
S. Wu, Y. Shao, L. Wang, Y. Yuan, and C.K. Mechefske, "Relationship between chatter marks and rolling force fluctuation for twenty-high roll mill", Eng. Fail. Anal., vol. 55, pp. 87-99, 2015.
[http://dx.doi.org/10.1016/j.engfailanal.2015.05.008]
[37]
Y. Zheng, Z. Xie, Y. Li, G. Shen, and H. Liu, "Spatial vibration of rolling mills", J. Mater. Process. Technol., vol. 213, no. 4, pp. 581-588, 2013.
[http://dx.doi.org/10.1016/j.jmatprotec.2012.11.010]
[38]
P-H. Hu, and K.F. Ehmann, "stability analysis of chatter on a tandem rolling mill", J. Manuf. Process., vol. 2, no. 4, pp. 217-224, 2000.
[http://dx.doi.org/10.1016/S1526-6125(00)70023-5]
[39]
O. BschorrHans, and J. Raida, "Vibration damping roll", AU779828B2, 2001.
[40]
S. Morii, H. Nakajima, and Y. Nohara, "Device for suppressing vibration of rolling mill", JPH10314816A, 1997.

Rights & Permissions Print Cite
Article Metrics
23
1
© 2024 Bentham Science Publishers | Privacy Policy