Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Design and Performance Analysis of Distributed Equal Angle Spiral Vertical Axis Wind Turbine

Author(s): Li Zheng*, Zhang Wenda, Han Ruihua and Tian Yongsheng

Volume 14, Issue 1, 2020

Page: [120 - 132] Pages: 13

DOI: 10.2174/1872212113666191002150551

Price: $65

Abstract

Background: The wind turbine is divided into a horizontal axis and a vertical axis depending on the relative positions of the rotating shaft and the ground. The advantage of the choke wind turbine is that the starting torque is large and the starting performance is good. The disadvantage is that the rotation resistance is large, the rotation speed is low, the asymmetric flow occurs when the wind wheel rotates, the lateral thrust is generated, and the wind energy utilization rate is lowered. How to improve the wind energy utilization rate of the resistance wind turbine is an important issue to be solved by the wind power technology.

Objective: The nautilus isometric spiral wind turbines studied in this paper have been introduced and analyzed in detail, preparing for the further flow analysis and layout of wind turbines, improving the wind energy utilization rate of wind turbines, introducing patents of other structures and output characteristics of its generator set.

Methods: Combined with the flow field analysis of ANSYS CFX software, the numerical simulation of the new wind turbine was carried out, and the aerodynamic performance of the new vertical axis wind turbine was analyzed. The mathematical model and control model of the generator were established by the maximum power control method, and the accuracy of the simulation results was verified by the measured data.

Results: The basic parameters of the new wind turbine tip speed ratio, torque coefficient and wind energy utilization coefficient are analyzed. Changes in wind speed, pressure and eddy viscosity were investigated. Three-dimensional distribution results of wake parameters such as wind speed and pressure are obtained. By simulating the natural wind speed, the speed and output current of the generator during normal operation are obtained.

Conclusion: By analyzing the wind performance and power generation characteristics of the new wind turbine, the feasibility of the new wind turbine is determined, which provides reference and reference for the optimal design and development of the wind turbine structure.

Keywords: Nautilus isometric spiral wind turbine, pneumatic performance, ANSYS CFX, numerical simulation, wake analysis, maximum power control.

Graphical Abstract

[1]
""Fracaroli", "Vertical axis wind turbine with moving blades". WO Patent 2,017,191,666 A1, September 11, 2017.
[2]
J. Feng, Wind turbine for improving starting performance. CN Patent 108,678,900 A, April 13, 2018.
[3]
Z. Li, P.F. Gao, and T.T. Sun, "Numerical simulation and analysis of vertical axial wind turbine characteristics of distributed energy system", J. Electrotech, vol. 32, pp. 155-163, 2017.
[4]
P. Jaohindy, "Gard e F, Bastide A. "Aerodynamic and mechanical system modeling of a vertical axis wind turbine (VAWT),", In: ICECE. 2011, pp. 5189-5192",
[5]
K.N. Morshed, M. Rahmanet, G. Molina, and M. Ahmed, "Wind tunnel testing and numerical simulation on aerodynamic performance of a three-bladed Savonius wind turbine", IJEEE, vol. 4, p. 18, 2013.
[6]
J.V. Akwa, "Discussion on the verification of the overlap ratio influence on performance coefficients of a Savonius wind rotor using computational fluid dynamics", Renew. Energy, vol. 38, pp. 141-149, 2011.
[http://dx.doi.org/10.1016/j.renene.2011.07.013]
[7]
J. Kumbernuss, J. Chen, and H.X. Yang, Investigation into the relationship of the overlap ratio and shift angle of double stage three bladed vertical axis wind turbine (VAWT)., J. Wind Eng. and Ind. Aero, pp. 107-108. 2012
[http://dx.doi.org/10.1016/j.jweia.2012.03.021]
[8]
J. Chen, "Z. linhua, J. Kumbernuss, and L. Lin, “Influence of phase-shift and overlap ratio on savonius wind turbine’s performance", J. Sol. Energ., vol. 134, pp. 1-9, 2012.
[http://dx.doi.org/10.1115/1.4004980]
[9]
A. Sagharichi, M.J. Maghrebi, and A. Arabgolarcheh, "Variable pitch blades: An approach for improving performance of Darrieus wind turbine", J. Renew. Sustain. Energy, vol. 8, . 053305 2016
[http://dx.doi.org/10.1063/1.4964310]
[10]
L. Song, Z. X. Yang, and R. T. Deng, Performance and structure optimization for a new type of vertical axis wind turbine. ICAMechS, Luoyang, China, pp. 687-692, 2013.
[http://dx.doi.org/10.1109/ICAMechS.2013.6681730]
[11]
C. Ma, L. Song, and M.Z. Zhang, Performance study for a novel vertical axis wind turbine based on simulation analysis In IEEE ICNSC, Calabria, Italy, 2017, pp. 549-554.
[http://dx.doi.org/10.1109/ICNSC.2017.8000151]
[12]
W. Kou, X. Shi, and B. Yuan, Modeling analysis and experimental research on a combined-type vertical axis wind turbine., ICEIC: Ningbo, China, 2011, pp. 1537-1541.
[http://dx.doi.org/10.1109/ICECC.2011.6067999]
[13]
Y.S. Tian, Nautilus isometric spiral wind turbine generator. CN Patent 106,368,896, 2017.
[14]
A. Ahmed, L. Ran, and J.R. Bumby, "New constant electrical power soft-stalling control for small-scale VAWT", IEEE Trans. Energ. Convers., vol. 25, pp. 1152-1161, 2010.
[http://dx.doi.org/10.1109/TEC.2010.2043737]
[15]
Z.G. Zhao, T.J. Wang, and J. Huang, "Analysis of influence of aerodynamic performance of installation angle on vertical axis wind wheel", J. Electrotech, vol. 34, pp. 1304-1309, 2014.
[16]
X.N. Ji, Jörg Schlüter. “Design and Analysis of Small-Scale Vertical Axis Wind Turbine., RPGTM: Edinburgh, UK, 2016.
[17]
X.C. Liu, and Q.Y. Mo, "Numerical simulation and experimental verification of aerodynamic noise of small vertical axis wind turbine", FMI, vol. 44, pp. 11-16, 2016.
[18]
Z. Li, R.H. Han, and P.F. Gao, Analysis and implementation of a drag-type vertical-axis wind turbine for small distributed wind energy systems.. AIME, vol. 11, pp. 1-16, 2019.
[http://dx.doi.org/10.1177/1687814019825709]
[19]
B. Tian, K. Zhao, and D.Y. Sun, "Application of improved variable step size maximum power tracking algorithm in wind power generation system", J. Electrotechs, vol. 31, pp. 226-233, 2016.
[20]
M. Cheng, P. Han, and X.C. Wei, "Design, analysis and control of brushless double wind turbines", J. Electrotech, vol. 31, p. 3753, 2016.
[21]
D.W. Liu, J.B. Guo, and Y.H. Huang, "An active power control strategy for wind farm based onpredictions of wind turbine’s maximum generation capacity", J. Renew. Sustain. Energy, vol. 5, pp. 1-10, 2013.
[http://dx.doi.org/10.1063/1.4792847]
[22]
D.W. Choi, S.I. Byun, and Y.H. Cho, "A study on the maximum power control method of switched reluctance generator for wind turbine", IEEE Trans. Magn., vol. 50, p. 14, 2014.
[http://dx.doi.org/10.1109/TMAG.2013.2274174]
[23]
S. Li, T.A. Haskew, and K.A. Williams, "Control of DFIG wind turbine with direct-current vector control configuration", IEEE Transactions on Sustainable Energy, vol. 3, pp. 1-11, 2012.
[http://dx.doi.org/10.1109/TSTE.2011.2167001]
[24]
C. Wen, and X. Liu, Vector control strategy for small-scale grid-connected PMSG wind turbine converter.IEEE ISGT ASIA, . pp. 1- 7, 2012.
[25]
J. Chen, J.W. Chen, and C.Y. Gong, "Research on unified power control strategy of variable speed wind power system", J. Electrotech, vol. 29, pp. 256-265, 2014.

Rights & Permissions Print Cite
Article Metrics
8
© 2024 Bentham Science Publishers | Privacy Policy