The Use of Different Electrode Materials for Electricity Production in a Microbial Fuel Cell Using a Klebsiella oxytoca Microorganism Under Different Operating Conditions

Author(s): Israa K. Abdul-Wahid, Saleem M. Obyed, Basim O. Hasan*

Journal Name: Recent Innovations in Chemical Engineering
Formerly Recent Patents on Chemical Engineering

Volume 14 , Issue 3 , 2021

Become EABM
Become Reviewer
Call for Editor

Graphical Abstract:


Microbial fuel cells (MFCs) have been developed impressively over recent years. In order to take this technology from research to application, the performance of these systems needs to be further investigated and optimized. The electrode materials and operating conditions play a vital role in MFCs performance. In the current work, dual chamber MFC was used to investigate the performance of different electrode materials under stationary and flow conditions. Microorganism solution of Klebsiella oxytoca and Citrobacter Freundii inoculum was used in the anode chamber. Three electrode materials were investigated, namely activated carbon, graphite, and titanium. High current density and power output were obtained by activated carbon electrode and graphite, while titanium showed poor performance for bio-electricity production. The low flow velocity (or Reynolds number) in catholyte was found to enhance the energy production, while the high velocity caused a reduction in the produced current. The aeration of the cathode chamber had a negative effect on the produced current due to the transfer of dissolved oxygen to the microorganism chamber. Activated carbon showed high performance due to its high surface area with the achieved maximum power density of 462.74 mW/m2 at Reynolds number of 7030.

Keywords: Microbial fuel cell, electrode material, anaerobic microorganism, flow velocity, aeration, Klebsiella oxytoca.

Rights & PermissionsPrintExport Cite as

Article Details

Year: 2021
Published on: 19 October, 2020
Page: [246 - 258]
Pages: 13
DOI: 10.2174/2405520413999201019155324
Price: $65

Article Metrics

PDF: 273