Recent Patents on Conical Pick and Flat Pick for Coal Mining

Author(s): Yanxiang Wang, Daolong Yang, Bangsheng Xing*, Wenqiang Yu, Jie Guo, Hao Xu

Journal Name: Recent Patents on Mechanical Engineering

Volume 13 , Issue 4 , 2020


Become EABM
Become Reviewer
Call for Editor

Abstract:

Background: Coal mining machines are the primary equipment used for the comprehensive mining of medium and thick coal seams. A shield machine is used to modify the geological structure of the soil, especially in urban subway tunnel engineering. The cutting and tunneling equipment have greatly improved the efficiency of coal seam mining and rock tunneling construction, but the consumption of picks in mining and tunneling is very high.

Objective: In order to reduce the consumption of picks, it is necessary to obtain the change of temperature inside the pick in the process of cutting.

Methods: This paper introduces a temperature measurement method to measure the temperature inside the conical and flat pick to provide a reference for the design and manufacture of picks.

Results: The temperature measurement method used in flat and conical pick can obtain the temperature change inside the pick under the actual working condition, which has a considerable guiding significance to promote the development of coal mining.

Conclusion: This study provides an important basis for the safety of mining operations and for prolonging the service life of picks. It has a strong innovation value and broad practicality.

Keywords: Coal mining machines, conical pick, embedded thermosensitive sensor, flat pick, patents, temperature measurement.

[1]
Song, Z.F., Shi, X.B., Jiang, H.P., Lei, K.K. Spiral drum of a coal shearer used to increase lump coal rate. CN204920947 (2015).
[2]
Li, Z., Li, J., Li, X.Y., Wang, X.J., Bi, Y.K., Song Y.Y. A high lump coal mining machine drum. CN205654338 (2016).
[3]
Zhang, D.G., Yang, B., Zhou, S.Y. A coal mining machine drum and coal mining machine. CN206458466 (2017).
[4]
Tong, J.F., Shang, Q.H., Meng, W.M., Liu, S.X., Du, J., Zhang, F. A new type of rotary excavator cutter. CN206816253 (2017).
[5]
Zhao, L.J., Tian, Z., Shi, B.S., Liu, X.N., Zhang, M.C., Zhou, W.C. Kind of spiral drum of coal mining machine for cutting coal rock with gangue and gangue. CN106640067 (2017).
[6]
Wang, X.G., Qu, J.T., Zhang, L.J., Gao, W., Wang, L. A kind of wear-resistant and sparkless cutter type tooth. CN207470181 (2018).
[7]
Yang, D.L., Wang, Y.X., Xing, B.S. A knife-type cutter that can measure the cutting temperature. CN107780933 (2018).
[8]
Bai, H.W. A type of rotary tool cutter. CN207093086 (2018).
[9]
Wu, H.Z., Liu, S.Y., Du, C.L., Xue, Y.G., Cui, X.X., Li, J.P., Liu, X.H. Wavy spiral blade roller. CN204609877 (2015).
[10]
Liu, Y.Y., Du, C.L., Cui, X.X., Li, J.P., Jiang, H.X., Liu, X.H., Tang, W., Wang, S.L. A hob cutting head. CN105178955 (2015).
[11]
Liu, C.Y., Du, C.L., Xue, Y.G., Li, J.P., Jiang, H.X., Liu, X.H.,Liu, Z.H., Han, D.D. Stepped trapezoid drum of high stress coal and rock in deep well. CN104712334 (2015).
[12]
Zhang, X.Q., Liu, X.H., Wang, S.X., Wang, S.B., Wang, H.G., Yan, G.C. Novel wear-resisting cutting tooth. CN204476411 (2015).
[13]
Song, Z.F., Su, X.B., Jiang, H.P., Lei, K.K. A coal-winning machine helical drum for improving lump coal rate. CN204920947 (2015).
[14]
Hao, S.Q, Liu, T., Yang, M.; Bao, Q.B., Guo, S.L., Wu, S.Y., Lv, X.D., Pang, J.F., Xu, S.W., Du, W., Xiao, H., Ding, Z.Y., Zhang,L.M., Li, W.W. Three-drum shearer and shearing method of ultrathick seams. CN106050228 (2016).
[15]
Liu, J.X., Gao, R., Ma, C., Yu, R.D., Li, X.H., Xue, F.X. An angle adjustable pickaxe tooth socket. CN205400729 (2016).
[16]
Pu, C.Y., Jing, Z.G., Wu, L.M., Liu, F., Liu, Q., Yan, Z.L., Wang, M.L., Lu, D.L. Coal mine roadway grooving machine. CN105332700 (2016).
[17]
Li, Z., Li, J., Li, X.Y., Wang, X.J., Bi, Y.K., Song, Y.Y. High lump coal rate coal -winning machine cylinder. CN205654338 (2016).
[18]
Li, W.H., Zhou, F., Zhang, W., Liang, Y.J., Chen, G.N., Wang, S., Di, L.L., Tao, K. A broken middle part groove reaches elevating conveyor. CN205199625 (2016).
[19]
Zhang, D.G., Yang, B., Zhou, S.Y. Coal -winning machine cylinder and coal -winning machine. CN206458466 (2017).
[20]
Xuan, H.B., Yang, F., Zhang, P., LI, T.Y., Kou, Z.M. Split pickaxshaped cutting pick. CN106801604 (2017).
[21]
Wang, Z.P., Guo, G.F., Cai, J., Dong, C.J., Li, Z.X. A hard alloy blade head. CN206200154 (2017).
[22]
Yan, P.F., Li, W.W., Zhou, X., Ding, Z.Y., Liu, Z.P., Wang, B., Li, R.F., Li, G. A high lump coal cutting device. CN206409229 (2017).
[23]
Zhang, Q., Cao, Y.K., Sun, R.D. A high ground stress tunneling unloading cutting device. CN106321111 (2017).
[24]
Yan, H.P., He, D.H., Ma, Z.B., Hu, L.Y., Guo, W.F., Hui, B.L., Xing, S.X., Liu, G.Y., Huang, W.L., Yin, G.J., Bao, T.Y., Zhou, T. A cutting head used in boring machine and its construction method. CN106968680 (2017).
[25]
Zhao, L.J., Tian, Z., Shi, B.S., Liu, X.N., Zhang, M.C., Zhou, W.C. Kind of spiral drum of coal mining machine for cutting coal rock with gangue and gangue. CN106640067 (2017).
[26]
Ma, M.Z., Shi, X.B., Yuan, B., Tao, X.Z., Bu, Q.H., Shi, J. A spiral drum of coal mining machine for improving lump coal rate. CN206737915 (2017).
[27]
Xu, Z.P. Spiral drum of a high reliability coal miner. CN206816248 (2017).
[28]
Yang, D.L., Wang, Y.X., Xing, B.S. A pickaxe type cutter that can measure the cutting temperature. CN107542463 (2018).
[29]
Ma, C., Yu, R.D., Jiao, W., Gao, R., Wang, Y. A rotary pickaxe gear cutting device. CN207212335 (2018).
[30]
Li, S.J., Lei, G.Y., Yao, M.B., Liu, Q.W., Zhang, Y.Q., Wu, Q.F., Kang, M., Liang, W.C., Huang, Z.B., Zhang, L.J., Zhang, T. New type of double-helix gear cutting device for water mining machine. CN107780940 (2018).
[31]
Qian, D., Huang, M., A spiral drum of a coal mining machine. CN207598235 (2018).
[32]
Wan, Z.J., Cheng, X.L., Liu, S.P., Zhang, Y., Zhou, C.B., Cheng, J.Y. The utility model relates to a cutting tooth which can be used to measure the cutting head temperature in the process of cutting coal rock by mining machinery. CN204200231 (2014).
[33]
Yang DL, Li JP, Wang LP, Gao KD, Tang YH, Wang YX. Experimental and theoretical design for decreasing wear in conical picks in rotation-drilling cutting process. Int J Adv Manuf Technol 2015; 77(9-12): 1571-9.
[http://dx.doi.org/10.1007/s00170-014-6472-5]
[34]
Yang DL, Li JP, Du CL, Liu SY, Zheng KH, Jiang HX. Wear performance of conical pick in rotary-drilling cutting process. Electron J Geotech Eng 2015; 20(8): 2031-40.
[35]
Li XY, Lv YG, Zeng QL, Wang JT. Research on strength of roadheader conical picks based on finite element analysis. Open Mech Eng J 2015; 9(1): 521-6.
[http://dx.doi.org/10.2174/1874155X01509010521]
[36]
Liu XH, Liu SY, Li L, Cui XX. Experiment on conical pick cutting rock material assisted with front and rear water jet. Adv Mater Sci Eng 2015; 2015 506579
[http://dx.doi.org/10.1155/2015/506579]
[37]
Dewangan S, Chattopadhyaya S, Hloch S. Critical damage analysis of WC-Co tip of conical pick due to coal excavation in mines. Adv Mater Sci Eng 2015; 2015 292046
[http://dx.doi.org/10.1155/2015/292046]
[38]
Dewangan S, Chattopadhyaya S, Hloch S. Wear assessment of conical pick used in coal cutting operation. Rock Mech Rock Eng 2015; 48(5): 2129-39.
[http://dx.doi.org/10.1007/s00603-014-0680-z]
[39]
Dewangan S, Chattopadhyaya S. Characterization of wear mechanisms in distorted conical picks after coal cutting. Rock Mech Rock Eng 2016; 49(1): 225-42.
[http://dx.doi.org/10.1007/s00603-015-0726-x]
[40]
Liu CS, Wang QH, Li DG. Fractal characteristic and specific energy model of conical picks cutting resistance spectrum. J China Coal Soc 2015; 40(11): 2623-8.
[41]
Wang LP, Jiang BS, Zhang Q. Calculation of peak cutting force of conical picks under conditions of dissymmetrical slotting. J China Coal Soc 2016; 41(11): 2876-82.
[42]
Wang LP, Jiang BS, Zhang Y, Zhang Q. Calculation of peak cutting force of conical picks based on Evans’ cutting model. J China Coal Soc 2016; 41(9): 2367-72.
[43]
Zhang QQ, Han ZN, Zhang MQ, Zhang JG. Tests and simulation for wear of conical pick under impact load. J Vib Shock 2016; 35(13): 58-65.
[44]
Ou Y, Yi P, Yang Q. Estimation of cutting force of rock cutting with conical picks. J Shanghai Jiaotong Univ 2016; 50(1): 35-40 and 46.
[45]
Liu CS, Li DG. Experimental research and theoretical model on lateral force of conical pick under different cutting conditions. J China Coal Soc 2016; 41(9): 2359-66.
[46]
Liu SY, Ji HF, Liu XH, Jiang HX. Experimental research on wear of conical pick interacting with coal-rock. Eng Fail Anal 2017; 74: 172-87.
[http://dx.doi.org/10.1016/j.engfailanal.2017.01.013]
[47]
Liu JX, Ma C, Zeng QL, Gao R, Jiao ZY. Research on cutting force of conical pick in cutting coal process. J China Coal Soc 2017; 42(5): 1325-30.
[48]
Liu SY, Ji HF, Liu XH. Effect of pick working angle on the cutting performance of a cutting head. J Braz Soc Mech Sci Eng 2017; 39(10): 4147-59.
[http://dx.doi.org/10.1007/s40430-017-0806-9]
[49]
Liu JX, Ma C, Zeng QL, Gao KD. Discrete element simulation of conical pick’s coal cutting process under different cutting parameters. Shock Vib 2018; 2018 7975141
[http://dx.doi.org/10.1155/2018/7975141]
[50]
Choi SW, Lee C, Kang TH, Park B, Chang SH. An experimental study of cutter forces of conical picks with uniaxial compressive strength of mortar specimens. 4th ISRM Young Scholars Symposium on Rock Mechanics, YSS. Jeju, Korea, May, 2017.
[51]
Li XB, Wang SF, Wang SY. Experimental investigation of the influence of confining stress on hard rock fragmentation using a conical pick. Rock Mech Rock Eng 2018; 51(1): 255-77.
[http://dx.doi.org/10.1007/s00603-017-1309-9]
[52]
Liang YP, Wang X, Wang QF. Effects of cut depth and cut spacing on tool forces acting on a conical pick in rock cutting. J Vib Shock 2018; 37(3): 27-33.
[53]
Wang SF, Li XB, Du K, Wang SY. Experimental investigation of hard rock fragmentation using a conical pick on true triaxial test apparatus. Tunn Undergr Space Technol 2018; 79(9): 210-33.
[http://dx.doi.org/10.1016/j.tust.2018.05.006]
[54]
Lu ZG, Wan LR, Zeng QL, Zhang X, Gao KD. The structural optimization of roadheader conical picks based on fatigue life. IJMSSC 2018; 2018 18500137
[http://dx.doi.org/10.1142/S1793962318500137]
[55]
Wang X, Wang QF, Liang YP, Su OK, Yang L. Dominant cutting parameters affecting the specific energy of selected sandstones when using conical picks and the development of empirical prediction models. Rock Mech Rock Eng 2018; 2018: 1-18.
[http://dx.doi.org/10.1007/s00603-018-1522-1]
[56]
Li X, Wang S, Ge S, Malekian R, Li Z. A theoretical model for estimating the peak cutting force of conical picks. Exp Mech 2018; 2018: 1-12.
[http://dx.doi.org/10.1007/s11340-017-0372-1]
[57]
Yang DL, Li JP, Zheng KH, Jiang HX, Xu HD, Liu SY. High hardness alloy substituted by low hardness during drilling and cutting experiments of conical pick. Int J Rock Mech Min Sci 2017; 95: 73-8.
[http://dx.doi.org/10.1016/j.ijrmms.2017.04.006]
[58]
Yang DL, Li JP, Wang YX, Jiang HX. Research on vibration and deflection for drilling tools of coal auger. J Vibroeng 2017; 19(7): 4882-97.
[http://dx.doi.org/10.21595/jve.2017.18581]
[59]
Yang DL, Li JP, Wang YX, Jiang HX. Analysis on vertical steering vibration of drum shearer cutting part. J Cent South Univ 2018; 25(11): 2722-31.
[http://dx.doi.org/10.1007/s11771-018-3949-7]


Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 13
ISSUE: 4
Year: 2020
Published on: 12 October, 2020
Page: [295 - 302]
Pages: 8
DOI: 10.2174/2212797613999200525134542
Price: $25

Article Metrics

PDF: 23
HTML: 2
EPUB: 1
PRC: 1