Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Review Article

A Review on Reliability Modeling of Manufacturing Systems Considering the Production Quality and Equipment Reliability

Author(s): Kewu Li, Jun Yang* and Shuo Huang

Volume 15, Issue 1, 2021

Published on: 07 April, 2020

Page: [22 - 29] Pages: 8

DOI: 10.2174/1872212114999200407105025

Price: $65

Abstract

Background: Nowadays, the manufacturing industry is much more fiercely competitive and global than ever before. For sustainable increases in market share and profitability, manufacturers are aiming to improve the quality of products and maintain the reliability of manufacturing systems.

Objective: Therefore, to simultaneously optimize the quality and reliability for manufacturing systems has become an important research topic in recent years.

Methods: This study presents an overview of the methods for modeling manufacturing systems, especially considering the system reliability and the product quality. And then, we review the optimization methods for manufacturing system maintenance and production strategy.

Conclusion: Finally, optimization methods and some challenges are summarized for future studies.

Keywords: Manufacturing system, reliability modeling, optimization, system reliability, product quality, maintenance strategy.

Graphical Abstract
[1]
J. Lee, M. Ghaffari, and S. Elmeligy, "Self-maintenance and engineering immune systems: Towards smarter machines and manufacturing systems", Annu. Rev. Control., vol. 35, no. 1, pp. 111-122, 2011.
[2]
C.E. Pereira, and L. Carro, "Distributed real-time embedded systems: Recent advances, future trends and their impact on manufacturing plant control, IFAC Proceed. Vol., 39, 2 no. 3, pp. 21-32, 2006",
[3]
W. Dembeck, and D. Gibson, "Intergrating the quality assurance function into the new product development process In", ASQ World Conference on Quality and Improvement Proceedings, 1999p. 238
[4]
H. Ke, "Sampling plans for vehicle component reliability verification", Quality Reliab. Eng. Int., vol. 15, no. 5, pp. 363-368, 1999.
[http://dx.doi.org/10.1002/(SICI)1099-1638(199909/10)15:5<363:AID-QRE261>3.0.CO;2-B]
[5]
T.I. Liu, X. Yang, and A. Mathematics, "Design for quality and reliability using expert system and computer spreadsheet", J. Franklin Inst., vol. 336, no. 7, pp. 1063-1074, 1999.
[6]
B. Prasad, "A model for optimizing performance based on reliability, life-cycle costs and other measurements", Prod. Plan. Contr., vol. 10, no. 3, pp. 286-300, 1999.
[7]
Y. Dutuit, A. Rauzy, and S. Safety, "Approximate estimation of system reliability via fault trees", Reliab. Eng. Syst. Safety., vol. 87, no. 2, pp. 163-172, 2005.
[http://dx.doi.org/10.1016/j.ress.2004.02.008]
[8]
S.J. Rhee, and K.J.A.E.I. Ishii, "Using cost based FMEA to enhance reliability and serviceability", Adv. Eng. Info., vol. 17, no. 3, pp. 179-188, 2003.
[http://dx.doi.org/10.1016/j.aei.2004.07.002]
[9]
B.S. Dhillon, and N.J.M.R. Yang, "Comparisons of block diagram and Markov method system reliability and mean time to failure results for constant and non-constant unit failure rates", Microelectrons. Reliab., vol. 37, no. 3, pp. 505-509, 1997.
[http://dx.doi.org/10.1016/0026-2714(95)00180-8]
[10]
A. Adamyan, D.J.Q. He, and R.E. International, "System Failure Analysis Through Counters of Petri Net Models", Quality Reliab. Eng., vol. 20, no. 4, pp. 317-335, 2004.
[11]
F. Ounnar, and P. Ladet, "Consideration of machine breakdown in the control of flexible production systems", Int. J. Comput. Integ Manuf., vol. 17, no. 1, pp. 69-82, 2004.
[http://dx.doi.org/10.1080/0951192031000078194]
[12]
R. Sharma, and P. Sharma, "Qualitative and quantitative approaches to analyse reliability of a mechatronic system: A case", J. Indust. Eng. Int., vol. 11, pp. 253-268, 2015.
[http://dx.doi.org/10.1007/s40092-015-0098-6]
[13]
L. Li, "Reliability estimation based on operational data of manufacturing systems", Quality. Reliab. Eng. Int., vol. 24, no. 7, pp. 843-854, 2008.
[http://dx.doi.org/10.1002/qre.959]
[14]
G. Li, S. Masuda, D. Yamaguchi, and M.J.I.T.R. Nagai, "A “New Reliability Prediction Model in Manufacturing Systems”", IEEE Trans. Reliab., vol. 59, no. 1, pp. 170-177, 2010.
[15]
W.H. Elmaraghy, O.A. Nada, and H.A. Elmaraghy, "Quality prediction for reconfigurable manufacturing systems via human error modelling", Int. J. Comput. Integr Manuf., vol. 21, no. 5, pp. 584-598, 2008.
[http://dx.doi.org/10.1080/09511920701233464]
[16]
Y. Koren, S.J. Hu, T.W. Weber, and C. Cirp, "“Impact of manufacturing system configuration on performance”, Cirp Annals 1998 – Manuf", Technol., vol. 47, no. 1, pp. 369-372, 1998.
[17]
Y. Liu, and J. Li, "American Control Conference, Vols 1-9", Proc. Am. Control Conf., vol. 2009, p. 2190, 2009.
[18]
H. Wu, and H. Jin, "Analysis of brittle tree of complex system based on chart theory In", Chinese control and decision conference Guilin, China, 2009pp. 1137-1140
[http://dx.doi.org/10.1109/CCDC.2009.5193334]
[19]
Y. Qin, L. Zhao, and Y. Yao, "Dynamic quality characteristics modelling based on brittleness theory in complex manufacturing processes", Int. J. Comput. Integr Manuf., vol. 24, no. 10, pp. 915-926, 2011.
[http://dx.doi.org/10.1080/0951192X.2011.592996]
[20]
X. Zhao, B. Liu, and Y. Liu, "Reliability modeling and analysis of load-sharing systems with continuously degrading components", IEEE Trans. Reliab., vol. 67, no. 3, pp. 1096-1110, 2018.
[http://dx.doi.org/10.1109/TR.2018.2846649]
[21]
W. Yan, "Study of supply chain’s brittleness based on the complex system brittle theory", in IEEE international conference on grey systems and intelligent services, Nanjing, China, 2007, pp. 1199- 1203., .
[22]
M.A. Karim, A.J.R. Smith, S.K. Halgamuge, and M.M. Islam, "A comparative study of manufacturing practices and performance variables", Int. J. Prod. Econ., vol. 112, no. 2, pp. 841-859, 2008.
[http://dx.doi.org/10.1016/j.ijpe.2007.07.005]
[23]
T. Tomaru, M. Nakano, and H. Nishimura, "Supplier quality assessment to identify depth technical knowledge of component reliability", Prod. Plann. Contr., vol. 24, no. 1, pp. 128-140, 2013.
[http://dx.doi.org/10.1080/09537287.2011.622308]
[24]
B. Bouslah, A. Gharbi, and R. Pellerin, "Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures", Int. J. Prod. Eco., vol. 195, pp. 210-226, 2018.
[25]
S. Hao, and J. Yang, "A Novel Quality Requirement Design Method for the Quality Characteristic of Rubber Products Based on the Reliability Constraint", IEEE Access, vol. 6, pp. 17887-17895, 2018.
[http://dx.doi.org/10.1109/ACCESS.2018.2813418]
[26]
S.J. Hu, and Y. Koren, "Stream-of-Variation Theory for Automotive Body Assembly", CIRP Annals., vol. 46, no. 1, pp. 1-6, 1997.
[27]
F. Ju, J. Li, G. Xiao, and J. Arinez, "Quality flow model in automotive paint shops", Int. J. Prod. Res., vol. 51. 2013, no. 21, pp. 6470-6483., .
[http://dx.doi.org/10.1080/00207543.2013.824629]
[28]
T. Zhang, and J. Shi, "Stream of Variation Modeling and Analysis for Compliant Composite Part Assembly—Part I: Single-Station Processes", J. Manuf. Sci. Eng. vol. 138, no. 12, 2016.121003.
[29]
S. Du, R. Xu, D. Huang, X. Yao, and I. Engineering, "Markov Modeling and Analysis of Multi-stage Manufacturing Systems with Remote Quality Information Feedback", Comput. Indust. Eng., vol. 88, pp. 13-25, 2015.
[30]
A.Y. Nahm, M.A. Vonderembse, S.S. Rao, and T. Ragunathan, "Time-based manufacturing improves business performance—results from a survey", Int. J. Prod. Econom., vol. 101, no. 2, pp. 213-229, 2006.
[http://dx.doi.org/10.1016/j.ijpe.2005.01.004]
[31]
Y. Yusuf, A. Gunasekaran, E.O. Adeleye, and K. Sivayoganathan, "Agile supply chain capabilities: Determinants of competitive objectives", Eur. J. Operat. Res., vol. 159, no. 2, pp. 379-392, 2004.
[http://dx.doi.org/10.1016/j.ejor.2003.08.022]
[32]
J.C. Anderson, M. Rungtusanatham, R.G. Schroeder, and S. Devaraj, "A Path Analytic Model of a Theory of Quality Management Underlying the Deming Management Method", Preliminary Empirical Findings, vol. 26, no. 5, pp. 637-658, 1995.
[33]
R. Filippini, and P. Management, "Operations management research: some reflections on evolution, models and empirical studies in OM", Int. J. Operat. Prod. Manag., vol. 17, no. 7, pp. 655-670, 1997.
[34]
B.B. Flynn, R.G. Schroeder, and S.J.D.S. Sakakibara, "Impact of Quality Management Practices on Performance and Competitive Advantage", J. Decision Sci. Inst., vol. 26, no. 5, pp. 659-691, 1995.
[35]
C. Forza, and R.J.I.J.P.E. Filippini, TQM impact on quality conformance and customer satisfaction: A causal model, vol. 55. no. 1, pp. 1-20 1998.
[36]
K.B. Hendricks, and V.R.J.J.O.M. Singhal, "Firm characteristics, total quality management, and financial performance", J. Operat. Manag., vol. 19, no. 3, pp. 269-285, 2001.
[http://dx.doi.org/10.1016/S0272-6963(00)00049-8]
[37]
U. Ibusuki, and P. Kaminski, "Product development process with focus on value engineering and target-costing: A case study in an automotive company", Int. J. Prod. Econom., vol. 105, no. 2, pp. 459-474, 2007.
[38]
Y. Chen, J. Jin, and J. Shi, "Reliability modeling and analysis of multi-station manufacturing processes considering the quality and reliability interaction", In: systems man and cybernetics,, vol. 4. pp. 2093-2098 2001.
[39]
J.H. Jin, and Y. Chen, "Quality and reliability information integration for design evaluation of fixture system reliability", Qual. Reliab. Eng. Int., vol. 17, no. 5, pp. 355-372, 2001.
[http://dx.doi.org/10.1002/qre.416]
[40]
J. Jin, J. Shi, and E-T. Asme, "State Space Modeling of Sheet Metal Assembly for Dimensional Control", J. Manuf. Sci. Eng., vol. 121, no. 4, pp. 756-762, 1999.
[41]
Y. Chen, J.H. Jin, and J.J. Shi, "Integration of dimensional quality and locator reliability in design and evaluation of multi-station body-in-white assembly processes", IIE Trans., vol. 36, no. 9, pp. 827-839, 2004.
[http://dx.doi.org/10.1080/07408170490473015]
[42]
Y. Chen, and J. Jin, "Quality-oriented-maintenance for multiple interactive tooling components in discrete manufacturing processes", IEEE Trans. Reliab., vol. 55, no. 1, pp. 123-134, 2005.
[http://dx.doi.org/10.1109/TR.2005.864152]
[43]
R. Mantripragada, and D.E. Whitney, "automation, “Modeling and controlling variation propagation in mechanical assemblies using state transition models", in IEEE Trans. Robotics. Automation., vol. 15, no. 1, pp. 124-140, 1999.
[44]
A.P.S. Dogra, S.G. Kapoor, R.E. Devor, and E-T. Asme, "Mechanistic Model for Tapping Process With Emphasis on Process Faults and Hole Geometry", J. Manuf. Sci. Eng., vol. 124, no. 1, pp. 18-25, 2002.
[45]
Y.U. Ding, J. Jin, D. Ceglarek, and J. Shi, "Process-oriented tolerancing for multi-station assembly systems", IIE Trans., vol. 37, no. 6, pp. 493-508, 2005.
[http://dx.doi.org/10.1080/07408170490507774]
[46]
J-w. Sun, L-f. Xi, S-c. Du, and B. Ju, "Reliability modeling and analysis of serial-parallel hybrid multi-operational manufacturing system considering dimensional quality, tool degradation and system configuration", Int. J. Prod. Econ., vol. 114, no. 1, pp. 149-164, 2008.
[http://dx.doi.org/10.1016/j.ijpe.2008.01.002]
[47]
J. Sun, L. Xi, E. Pan, S. Du, and B. Ju, "Integration of product quality and tool degradation for reliability modelling and analysis of multi-station manufacturing systems", Int. J. Comput. Integr Manuf., vol. 22, no. 3, pp. 267-279, 2009.
[http://dx.doi.org/10.1080/09511920802209058]
[48]
F. Zhang, J. Lu, Y. Yan, S. Tang, and C. Meng, "Dimensional Quality Oriented Reliability Modeling for Complex Manufacturing Processes", Int. J. Comput. Intell. Sys., vol. 4, no. 6, pp. 1262-1268, 2011.
[49]
Y. He, Z. He, L. Wang, and C. Gu, "Reliability Modeling and Optimization Strategy for Manufacturing System Based on RQR Chain", In: Mathematical Problems Eng., vol. 2015,, 2015.
[http://dx.doi.org/10.1155/2015/379098]
[50]
X. Han, Y. He, Z. Chen, B. Chen, and C. Gu, "An Evaluation Method of Manufacturing System Health State Based on Mission Reliability", In: 2018 Prognostics and System Health Management Conference Prognostics and System Health Management Conference Detroit, MI, 2018pp. 735-740
[51]
Y.C. Liu, W. Zhang, G.C. Fu, and N. Li, "Mission Reliability Modeling of Manufacturing Processes and System", Appl. Mech. Mater., vol. 248, pp. 450-455, 2012.
[52]
C. Gu, Y. He, and X. Han, "A Novel Approach for Mission Reliability Modeling of Manufacturing System Based on the State Change of Machines and Materials", Procedia CIRP, vol. 57 2016, pp. 286-291, .
[http://dx.doi.org/10.1016/j.procir.2016.11.050]
[53]
Y. He, C. Gu, Z. Chen, and X. Han, "Integrated predictive maintenance strategy for manufacturing systems by combining quality control and mission reliability analysis", Int. J. Prod. Res., vol. 55, no. 19, pp. 5841-5862, 2017.
[http://dx.doi.org/10.1080/00207543.2017.1346843]
[54]
Y. Zhao, Y. He, Z. Chen, X. Han, and Z. He, "Big Operational Data Oriented Health Diagnosis Based on Weibull Proportional Hazards Model for Multi-State Manufacturing System", In: 2018 Prognostics and System Health Management Conference Prognostics and System Health Management Conference, Chongqing, China, 2018pp. 444-449
[55]
Z. Chen, "Mission reliability evaluation based on operational quality data for multistate manufacturing systems", Int. J. Prod. Res., vol. 57, no. 6, pp. 1840-1856, 2019.
[http://dx.doi.org/10.1080/00207543.2018.1508906]
[56]
Z. Wu, and S. Hsieh, "A realtime fuzzy Petri net diagnoser for detecting progressive faults in PLC based discrete manufacturing system", Int. J. Adv. Manuf. Technol., vol. 61, no. 1, pp. 405-421, 2012.
[http://dx.doi.org/10.1007/s00170-011-3689-4]
[57]
L. Yang, and J.J.R. Lee, " C-I, Bayesian Belief Network-based approach for diagnostics and prognostics of semiconductor manufacturing systems", Robotics. Comput.-Integr. Manuf., vol. 28, no. 1, pp. 66-74, 2012.
[http://dx.doi.org/10.1016/j.rcim.2011.06.007]
[58]
Y. He, L. Wang, Z. He, and X. Xiao, "Modelling infant failure rate of electromechanical products with multilayered quality variations from manufacturing process", Int. J. Prod. Res., vol. 54, no. 21, pp. 6594-6612, 2016.
[http://dx.doi.org/10.1080/00207543.2016.1154215]
[59]
G.W. Vogl, B.A. Weiss, and M. Helu, "A review of diagnostic and prognostic capabilities and best practices for manufacturing", J. Intelligent. Manuf., vol. 30, no. 1, pp. 79-95, 2019.
[60]
B. Sarkar, S.S. Sana, and K. Chaudhuri, "An imperfect production process for time varying demand with inflation and time value of money - An EMQ model", Expert Syst. Appl., vol. 38, no. 11, pp. 13543-13548, 2011.
[http://dx.doi.org/10.1016/j.eswa.2011.04.044]
[61]
A. Froger, M. Gendreau, J.E. Mendoza, E. Pinson, and L.M. Rousseau, Maintenance scheduling in the electricity industry: A literature review Eur. J. Operat. Res. vol. 251. 2016, no. 3, pp. 695-706.
[62]
B. Liu, P. Do, B. Iung, and M. Xie, "Engineering Stochastic filtering approach for condition-based maintenance considering sensor degradation", IEEE Trans. Automation. Sci. Eng., vol. 17, no. 1, pp. 177-190, 2019.
[63]
M. Doostparast, F. Kolahan, and M. Doostparast, "A reliability-based approach to optimize preventive maintenance scheduling for coherent systems", Reliab. Eng. Syst. Safety., vol. 126, pp. 98-106, 2014.
[64]
H. Lee, and J. Cha, "New stochastic models for preventive maintenance and maintenance optimization", Eur. J. Operat. Res., vol. 255, no. 1, pp. 80-90, 2016.
[http://dx.doi.org/10.1016/j.ejor.2016.04.020]
[65]
N. Safaei, D. Banjevic, and A. Jardine, "Impact of the use-based maintenance policy on the performance of cellular manufacturing systems", Int. J. Prod. Res., vol. 48, pp. 2233-2260, 2010.
[http://dx.doi.org/10.1080/00207540802710273]
[66]
B. Liu, R-H. Yeh, M. Xie, and W. Kuo, "Maintenance scheduling for multicomponent systems with hidden failures", IEEE Trans. Reliab., vol. 66, no. 4, pp. 1280-1292, 2017.
[http://dx.doi.org/10.1109/TR.2017.2740562]
[67]
R. Peng, B. Liu, Q. Zhai, and W. Wang, "Optimal maintenance strategy for systems with two failure modes", Reliab. Eng. Sys. Safety, vol. 188, pp 624-632, 2019, 2017..
[68]
S. Jiwen, X. Li-feng, D. Shi-chang, and P. Er-shun, "Tool maintenance optimization for multi-station machining systems with economic consideration of quality loss and obsolescence", Robotics. Comput.-Integr. Manuf., vol. 26, no. 2, pp. 145-155, 2010.
[http://dx.doi.org/10.1016/j.rcim.2009.07.005]
[69]
H. Rivera-Gómez, A. Gharbi, and J. Kenné, "Joint production and major maintenance planning policy of a manufacturing system with deteriorating quality", Int. J. Prod. Econom., vol. 146, no. 2, pp. 575-587, 2013.
[http://dx.doi.org/10.1016/j.ijpe.2013.08.006]
[70]
B. Lu, X. Zhou, and Y. Li, "Joint modeling of preventive maintenance and quality improvement for deteriorating single-machine manufacturing systems", Comput. Ind. Eng., vol. 91, pp. 188-196, 2016.
[http://dx.doi.org/10.1016/j.cie.2015.11.019]
[71]
P.P. Tambe, and M. Kulkarni, "A superimposition based approach for maintenance and quality plan optimization with production schedule, availability, repair time and detection time constraints for a single machine", J. Manuf. Syst., vol. 37 2015, pp. 17-32, .
[72]
M. Colledani, and T. Tolio, "Integrated quality, production logistics and maintenance analysis of multi-stage asynchronous manufacturing systems with degrading machines", CIRP Annals., vol. 61, no. 1, pp. 455-458, 2012.
[http://dx.doi.org/10.1016/j.cirp.2012.03.072]
[73]
X. Zhou, and B. Lu, "Preventive maintenance scheduling for serial multi-station manufacturing systems with interaction between station reliability and product quality", Comput. Ind. Eng., vol. 122, pp. 283-291, 2018.
[http://dx.doi.org/10.1016/j.cie.2018.06.009]
[74]
W.J.I.J.P.R. Chiang, "Discovering customer value for marketing systems: an empirical case study", Int. J. Prod. Res., vol. 55, no. 17, pp. 5157-5167, 2017.
[75]
A. Brall, and L. Gardner, "Annual Reliability and Maintainability Symposium", In Annual Reliability and Maintainability Symposium 2002 Proceedings(Proceedings : Annual Reliability and Maintainability Symposium, 2002pp. 411-416
[76]
J.C. Domingos, and P.R. Politano, "“On-line scheduling for flexible manufacturing systems based on fuzzy logic” syst., man and cybernetics, vol. 5, pp. 4928-4933, 2003",
[http://dx.doi.org/10.1109/ICSMC.2003.1245763]
[77]
K-H. Lu, and C.C. Chiang, "The study on the fuzzy-based taguchi method on the manufacturing process of multiple quality characteristics-TFT metal coating as an example", J. Quality, vol. 17, no. 1, pp. 67-87, 2010.
[78]
Y. Liu, and J. Li, "Split and merge production systems: performance analysis and structural properties", IEEE Trans., vol. 42, no. 6, pp. 422-434, 2010.
[http://dx.doi.org/10.1080/07408170903394348]
[79]
A. Janko, and L. Lugosi, "Balancing between cost and tester acceptance in case of new product introduction for PCB assembly", in 2008 31st International Spring Seminar on Electronics Technology: Reliability and Life-Time Prediction,, , 2008 Ed. (International Spring Seminar on Electronics Technology, Budapest, Hungary, 2008, pp. 458-461,
[http://dx.doi.org/10.1109/ISSE.2008.5276648]
[80]
R. Usubamatov, K.A. Ismail, and J.M. Sah, "Mathematical models for productivity and availability of automated lines", Int. J. Adv. Manuf. Technol., vol. 66, no. 1-4, pp. 59-69, 2013.
[http://dx.doi.org/10.1007/s00170-012-4305-y]
[81]
B. Bouslah, A. Gharbi, and R. Pellerin, "Integrated production, sampling quality control and maintenance of deteriorating production systems with AOQL constraint", Omega, vol. 61 2016, pp. 110-126, .
[82]
D. Srikanth, and M.S. Kulkarni, Quality, Reliability and Maintenance (Q, R & M) Issues in Reconfigurable Manufacturing Systems (RMS) Mech. Aerospace Eng., Pts 1-7, vol. 110-116. pp. 1442-1446 2012.
[83]
Y.H. He, Z.Z. He, L.B. Wang, and C.C. Gu, Reliability Modeling and Optimization Strategy for Manufacturing System Based on RQR Chain., Mathematical Prob. Eng., 2015.
[http://dx.doi.org/10.1155/2015/379098]
[84]
Y. He, "Reliability-oriented design of integrated model of preventive maintenance and quality control policy with time-between-events control chart", Comput. Ind. Eng., vol. 129, pp. 228-238, 2019.
[http://dx.doi.org/10.1016/j.cie.2019.01.046]
[85]
G. Waeyenbergh, and L. Pintelon, "CIBOCOF: A framework for industrial maintenance concept development", Int. J. Prod. Econom., vol. 121, no. 2, pp. 633-640, 2009.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy