Recent Patents on Valve Mechanism Device

Author(s): Ye Dai*, Hui-Bing Zhang, Yun-Shan Qi

Journal Name: Recent Patents on Mechanical Engineering

Volume 13 , Issue 3 , 2020

Become EABM
Become Reviewer

Abstract:

Background: Valves are an important part of nuclear power plants and are the control equipment used in nuclear power plants. It can change the cross-section of the passage and the flow direction of the medium and has the functions of diversion, cutoff, overflow, and the like. Due to the earthquake, the valve leaks, which will cause a major nuclear accident, endangering people's lives and safety.

Objective: The purpose of this study is to synthesize the existing valve devices, summarize and analyze the advantages and disadvantages of various devices from many literatures and patents, and solve some problems of existing valves.

Methods: This article summarizes various patents of nuclear-grade valve devices and recent research progress. From the valve structure device, transmission device, a detection device, and finally to the valve test, the advantages and disadvantages of the valve are comprehensively analyzed.

Results: By summarizing the characteristics of a large number of valve devices, and analyzing some problems existing in the valves, the outlook for the research and design of nuclear power valves was made, and the planning of the national nuclear power strategic goals and energy security were planned.

Conclusion: Valve damage can cause serious safety accidents. The most common is valve leakage. Therefore, the safety and reliability of valves must be taken seriously. By improving the transmission of the valve, the problems of complicated valve structure and high cost are solved.

Keywords: Actuator, analog monitoring device, localization, nuclear valve, seismic detection, test bench.

[1]
Wu JW. The basis of safety of nuclear power plants lies in design. An exclusive interview with Dr. Tashlykov Oleg, an ROSATOM independent scholar. J Chin Nucl Ind 2015; 4: 36-8.
[2]
Yang HL. Case study on nuclear leakage in Fukushima, Japan. MSc Dissertation, Zhengzhou University Zhengzhou, China May 2012.
[3]
Zhang YL. Valves for nuclear power stations. J Valv 2004; 1: 22-8.
[4]
Lu PW, Sun XX, Yang YL. Valve Selection Manual. Mach Ind Press. Beijing, China 2016.
[5]
Luo Q. Independent innovation brings brilliant glory to the future -The Road to Technological Innovation of China Nuclear Power Research and Design Institute. J National Defense Technology Industry 2009; 4: 18-9.
[6]
Wan SJ. Study on working characteristics of AP1000 main steam safety valveMSc Dissertation, Harbin Engineering University, Harbin, China, January 2013.
[7]
Chang JL. Research on design and experimental system of high pressure and large flow safety valve. PhD Dissertation, China University of Mining and Technology Xvzhou, China June 2015.
[8]
Xu LL, Wang ZD, Yu XH, Zeng C. Numerical simulation and structural optimization of erosion condition of pneumatic steam traps. J Fluid Mach 2017; 45(2): 32-7.
[9]
Lin Y, Yu XH. Experimental study and numerical simulation of raman temperature measurement of axial conduction of microchannels. J Therm Power Eng 2015; 30(1): 12-8.
[10]
Sun CZ, Yu XH, Zong X, et al. Prediction of external noise of control valves under internal turbulence. J Eng Thermophys 2017; 9: 1866-71.
[11]
Tang J, Yu XH, Li S, Zhou SP. Development of natural gas database and its application in valve simulation. J East Chin Univ Sci & Technol: Nat Sci Edit 2017; 5: 712-6.
[12]
Luo H, Yu XH, Wang ZD. Experimental study and numerical simulation of lift coefficient of safety valve. J Chin Sci & Technol Diss 2008; 3(8): 587-91.
[13]
Liu L, Zhai XF, Yu XH, et al. Seismic stress analysis and evaluation of nuclear safety valve. J Valv 2009; 6: 29-31.
[14]
Zhang YM. Three-dimensional constant-value simulation of critical flow and cavitation flow in nuclear safety valve MSc Dissertation, East China University of Science and Technology, Shanghai, China, February 2012..
[15]
Zhang B. Transient numerical simulation of flow field in safety valve and research and development of test device. MSc Dissertation, East China University of Science and Technology Shanghai, China, December. 2013.
[16]
Wang ZJ. Experimental research on thermal behavior of spring loaded safety valve and its transient CFD simulation method MSc Dissertation, East China University of Science and Technology, Shanghai, China, May. 2015.
[17]
Chen H. Structure design and stress check of CAP1400 main steam safety valve MSc Dissertation, East China University of Science and Technology, Shanghai, China, April. 2016.
[18]
Nakajima N, Kimura H, Higuchi K, et al. Towards to realize a quake-proof information control and management system for nuclear power plant. J Development Nuclear Seismic Information Control Syst 2004; 108(6): 656-67.
[19]
Cho S G, Kim D, Chaudhary S. A simplified model for nonlinear seismic response analysis of equipment cabinets in nuclear power plants Nucl Eng & Des. 2011; 241(8): 2750-7.
[http://dx.doi.org/10.1016/j.nucengdes.2011.06.026]
[20]
Föllmer B, Schnettler A, Sicherheits R. Challenges in designing API safety relief valves. J Press Vessel Technol 2003; 108(3): 267-72.
[21]
Föllmer B, Schnettler A, Cornelissen P. High Pressure Safety Relief Valves in Ethylene Service. PVP 2008; 2008: 59-70.
[22]
Föllmer B, Metzger K, Maile K. High-temperature control valves for the 700°C fossil fired power plant. Int J Control & Auto 2011; 7(12): 211-5.
[23]
Yang R. CFD Simulations of Oil Flow and Flow Induced Forces Inside Hydraulic Valves International Off-Highway & Powerplant Congress, Las Vegas, Nevada, USA, March 2002..
[24]
Opdenbosch P, Sadegh N, Book W, Murray T, Yang R. Modelling an electro-hydraulic poppet valve. Int J Fluid Power 2009; 10(1): 7-15.
[http://dx.doi.org/10.1080/14399776.2009.10780963]
[25]
Yang R. Predicting Hydraulic Valve Pressure Drop Using CFD SAE Technical Paper 2005.
[26]
Vu B, Wang T S, Shih M-H, Soni B. Navier-stokes flow field analysis of compressible flow in a high pressure safety relief valve J Appl Math & Comput 1994; 65(1-3): 345-53. [http://dx.doi.org/10.1016/0096-3003(94)90187-2].
[27]
Anwar AA, Gorash Y, Dempster W. Application of Multi-scale Approaches to the Investigation of Sealing Surface Deformation for the Improvement of Leak Tightness in Pressure Relief Valves. Springer: Singapore, 2016..
[http://dx.doi.org/10.1007/978-981-10-0959-4_27]
[28]
Zhang XF. Research on localization of nuclear power valves. J Chin Nucl Power 2011; 4(2): 138-45.
[29]
Dai Y, Liu R, Wei WQ, Li Y, Ren SL. A nuclear power valve seismic simulation and detection device. CN106908210 (2017).
[30]
Zhou J, Zhu W, Li MG, Kong XJ, Li W, Feng X. A largescale simulation test system simulating the combined action of earthquakes, waves and currents. CN104020007 (2014).
[31]
Meng Y. A family demonstration training device for earthquake simulation training equipment. CN107967833 (2018).
[32]
Gao F, Yang XS, Ma SL, Cui YB. A device for shutting off gas valve control by earthquake. CN107420601 (2017).
[33]
Zhang JW, Zhu JL, Li JY, et al. A DC motor for electric actuators of nuclear valves. CN103457431 (2013).
[34]
Liu HH. Valve electric actuator motor (1). CN304559297 (2018).
[35]
Liu HH. Valve electric actuator motor CN304646618 (2018).
[36]
Gong YM. An electric actuator control circuit and electric actuator CN206874923 (2018).
[37]
Liu HH. Valve electric actuator motor (2). CN304634949 (2018).
[38]
Zhang BQ, Fu WJ, Zhao LC, et al. An adjustable support device for valve electric actuator. CN207145759 (2018).
[39]
Wang XD. A valve actuator for electric actuators. CN207555177 (2018).
[40]
Zhang YY. A connection device between electric valve and actuator motor. CN207777732 (2018).
[41]
Dai Y, Liu R, Zhang YB, Wei WQ, Li Y, Han Y. A fast mounting mechanism for nuclear electric valve anti-seismic detector. CN107121270 (2017).
[42]
Zheng KY, Ding DL. Anti-seismic test method for nuclear power valves. J Valv 2017; 6: 9-11.
[43]
Zhang W, Qu CM. Analysis of the influence of seismic acceleration on valve identification and its countermeasures. J Nucl Power Eng 2016; 37(6): 62-5.
[44]
Li Q, Li PZ, Du JY, Li TY, Sun L, Li PF. Discussion on seismic test method for nuclear grade valves. J Nucl Power Eng 2016; 37(S2): 58-61.
[45]
Guo Q, Li T, Han S, Tang ZF. Study on seismic test of nuclear-grade valve drive unit. J Mach Des & Manuf 2014; 8: 121-3.
[46]
Cheng HX. A seismic sensing valve device CN107860542 (2018).
[47]
Li XD, Shi DF, Hong ZX. A pneumatic diaphragm valve structure for nuclear power with seismic performance CN106032845 (2016).
[48]
Sheng YF. A valve bracket with seismic performance. CN207750581 (2018).
[49]
Zeng P, Liu JR, Jiang XP. On-line monitoring device of valve stem seal leakage in nuclear valve CN102226484 (2011).
[50]
Zhao LH, Liao WX. Anti-leakage sealing valve. CN2205476 (1995).
[51]
Chen JC. A valve stem sealing structure. CN201739623U (2011).
[52]
Huang H, Gu YF, Wang GX, Gu LW, Zhang XJ. Magnetically controlled leak-free valve. CN202531967 (2012).
[53]
Gu KH, He JY, Liu CY, et al. A flange-mounted valve leakage detection device. CN207717299 (2018).
[54]
Wang DY, Zeng XM, Zhao B. Method for improving the detection rate of valve leakage. CN108896249 (2018).
[55]
Yang ZW. A valve leakage seal structure. CN207421452 (2018).
[56]
Chen FG, Wang W, Ming Y, et al. An automatic test device for valve leakage rate. CN107462379 (2017).
[57]
Yu C. Nuclear valve body and valve cover are connected with lip welding seal structure. CN2931986 (2007).
[58]
Wang Y. A new type of valve sealing structure for shut-off valve. CN206845937 (2018).
[59]
Li Y, Chen GL, Sun X, Chen GC. Sealing structure of valve body and valve cover. CN206001079 (2017).
[60]
Ma Y, Luo XN, Chang ZD, Li HS, Shi YJ. High temperature valve sealing structure. CN206299809 (2017).
[61]
Yuan J. valve with high sealing performance. CN107143657 (2017).
[62]
Liao XT, Liao WK, Liao WH, Liao MS. A valve sealing structure. CN205781238 (2016).
[63]
Fu JC, Wang M, Li JL, Hu J, Zeng PQ. A high pressure valve flange sealing structure. CN206175758 (2017).
[64]
Qin J. A high temperature and high pressure valve with good sealing performance in power plants. CN206608604 (2017).
[65]
Duan RQ. Nuclear valve remote transmission. CN202215833 (2012).
[66]
Li XY. A remote control valve. CN207715879 (2018).
[67]
Tian HL, Yang HN, Guan JH, Wang SX, Ren YQ, Zhang YX. A mobile remote control electric valve. CN207261772 (2018).
[68]
Wang JH, Wang RJ, Chen CF, Chen YX. A remote control anti-corrosion and explosion-proof stop valve. CN206449274 (2017).
[69]
Wang Q. A valve with remote monitoring system. CN205298799 (2016).
[70]
Yin JW. Remote control valve. CN204477437 (2015).
[71]
Cao XC. Wireless remote control valve. CN104061356 (2014).
[72]
Zhang YF, Lu P. A locking mechanism of a valve manual device. CN102466083 (2012).
[73]
Chen JS, Han S, Xu WC, Zhang W, Gong JZ, Qian R. A manual locking device for valve actuators. CN104100764 (2014).
[74]
Shen AG. A manual test device for pressure gas storage tank safety valve. CN207050970 (2018).
[75]
Chen HQ, Wang JP, Mai JC, Chen JK. A manual safety device for pulse safety valve for power generation boilers CN204961972 (2016).
[76]
Jiang SH, Wu W, Yan HL, Yao L, Bi X, Wang CG. An automatic test device for safety valves. CN208125368 (2018).
[77]
Zhang H, Zhang Y. Safety valve online monitoring system. CN107219072 (2017).


Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 13
ISSUE: 3
Year: 2020
Published on: 26 August, 2020
Page: [230 - 241]
Pages: 12
DOI: 10.2174/2212797613666200403141448
Price: $25

Article Metrics

PDF: 15
HTML: 1