Technical Support System for Power System Load Modeling

Author(s): Tiantian Sun, Shaorun Bian, Yu Sun, Zhenshu Wang*, Wenqiao Li, Fayu Chong

Journal Name: Recent Advances in Electrical & Electronic Engineering
Formerly Recent Patents on Electrical & Electronic Engineering

Volume 13 , Issue 7 , 2020


Become EABM
Become Reviewer
Call for Editor

Graphical Abstract:


Abstract:

Background: In order to better establish accurate load models and meet the practical demand of current power system load modeling, it is necessary to establish related technical support systems for power system load modeling.

Objective: The purpose of the paper was to construct the overall scheme of power system load modeling technology support system and complete the development of the system.

Methods: Based on the modular design idea, the system adopts a multi-level architecture combining B/S and C/S modes, covering the key technologies of substation classification based on selforganizing neural network algorithm, load dynamic characteristic classification based on lifting wavelet packet algorithm, load model parameter identification and load modeling based on adaptive interactive multiple model (AIMM) algorithm.

Results: After actual operation verification, the built technology support system can well solve the related problems of substation classification, load dynamic characteristic classification, load model parameter identification and load modeling. It has the characteristics of a friendly man-machine interface, simple operation and strong extensibility.

Conclusion: The built technology support system provides powerful technical support for improving the load data management level of the power system and establishing an accurate load model, and promotes the practical process of load modeling theory.

Keywords: Power system, load modeling, feature extraction, parameter identification, modularization, support system.

[1]
Q. Lu, "Digital power systems", Dianli Xitong Zidonghua, vol. 24, pp. 1-4, 2000.
[2]
A. Arif, Z. Wang, J. Wang, B. Mather, H. Bashualdo, and D. Zhao, "Load Modeling-A Review", IEEE Trans. Smart Grid, vol. 9, no. 6, pp. 5986-5999, 2018.
[http://dx.doi.org/10.1109/TSG.2017.2700436]
[3]
T. Yong, H. Zhang, J. Hou, and D. Zhang, "Study on essential principle and methods for load modeling", Power Syst. Technol., vol. 31, pp. 1-5, 2007.
[4]
P. Behrens, "Time-dependent load modeling in distribution networks-implementation and practical experience", In: Power Industry Computer Applications Conference IEEE, 2001, pp. 408-412.
[5]
S. Rafsanjani, T. Sedighizadeh, M. Kalantar, and M.R. Dadashzadeh, "Load modeling for power flow and transient stability computer studies with LOADMOD software", Proceedings of the IASTED International Conference on Applied Simulation and Modeling Rhodes, Greece, 2007pp. 522-527
[6]
S.I. Lin, X. Li, Y. Liu, H. Chen, W. Tang, Y. Li, P. Li, J. Zhu, and Q. Jin, "Development of load modeling platform for electric power system", Electric Power, vol. 38, pp. 87-91, 2005.
[7]
H. Zhang, Y. Tang, D. Zhang, and J. Hou, "Load modeling system founded on measurement-based method", Power Syst. Technol., vol. 31, pp. 32-35, 2007.
[8]
L. Zhang, X. Li, H. Chen, P. Wang, J. Song, and L. Huang, "Development of Load Modeling for Power System Based on Statistical Synthesis Method", Dianli Xitong Zidonghua, vol. 22, pp. 120-125, 2010.
[9]
H. Wang, "Research and development of load modeling software platform based on instantaneous measurements, M.S. thesis, North China Electric Power University 2011",
[10]
Y. Wang, Development and design of wide-area online power load modeling technology support platform, M.S. thesis, Hunan University, 2013.
[11]
Y. Yan, The research on digital simulation method and development of load modeling system for micro grid, M.S. thesis, Hunan University, 2013.
[12]
H. Wu, Research on regional power grid modeling and load modeling software, M.S. thesis, University of Electronic Science and Technology of China, 2013.
[13]
D. Pan, B. Wang, and Z. Zhou, "Research on Mixed Programming Technology of Matlab and C/C++", Comput. Eng. Des., vol. 30, pp. 465-468, 2009.
[14]
Z. Wang, S. Bian, Y. Liu, and Z. Liu, "The load characteristics classification and synthesis of substations in large area power grid", Int. J. Electr. Power Energy Syst., vol. 48, pp. 71-82, 2013.
[http://dx.doi.org/10.1016/j.ijepes.2012.11.032]
[15]
H. Liu, G. Liu, and Y. Shen, "Classification of power quality disturbance using lifting wavelet packet and correlation vector machine", High Voltage Eng., vol. 36, no. 3, pp. 782-788, 2010.
[16]
Z. Wang, S. Bian, M. Lei, C. Zhao, Y. Liu, and Z. Zhao, "Feature extraction and classification of load dynamic characteristics based on lifting wavelet packet transform in power system load modeling", Int. J. Electr. Power Energy Syst., vol. 68, pp. 353-363, 2014.
[http://dx.doi.org/10.1016/j.ijepes.2014.04.051]
[17]
Z. Wang, N. Ji, Y. Ma, J. Liu, and Y. Wang, "Model selection mechanism of Interactive multiple load modeling", Int. J. Electr. Power Energy Syst., vol. 103, pp. 58-66, 2018.
[http://dx.doi.org/10.1016/j.ijepes.2018.05.027]
[18]
Z. Wang, S. Bian, X. Liu, K. Yu, and Y. Shi, "Research on load model parameter identification based on the CQDPSO algorithm", Transact. Chin. Electrotech. Soc., vol. 12, pp. 211-217, 2014.
[19]
J. Zhu, W. Shi, J. Yi, M. Liu, and F. Liu, "On-line modeling of electric load based on interactive multi-model algorithm", Zhongguo Dianji Gongcheng Xuebao, vol. 36, no. 13, pp. 3479-3487, 2016.
[20]
Y. Ma, Z. Wang, X. Jiang, and B. Fan, Research on adaptive synthesis dynamic load model based on multiple model ideology.In: 2015 IEEE PES Asia-Pacific Power and Energy Engineering Conference., (APPEEC): Brisbane, QLD, USA, 2015, pp. 1-5.
[http://dx.doi.org/10.1109/APPEEC.2015.7381035]
[21]
Y. Ma, Research on interactive multi-model power load modeling theory and method, M.S. thesis, Dept. Electrical Eng., Shandong Univ, Jinan, China, 2016.
[22]
N. Ji, Research on the Power Load Modeling Theory Based on the Adaptive Interacting Multiple Model Algorithm, M.S. thesis, Shandong University, China,, 2018.
[23]
Y. He, G.H. Wang, and X. Guan, Information Fusion Theory and Application., Electronic Industry Press: Beijing, 2010.


open access plus

Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 13
ISSUE: 7
Year: 2020
Published on: 09 March, 2020
Page: [1059 - 1067]
Pages: 9
DOI: 10.2174/2352096513666200309110756

Article Metrics

PDF: 19
HTML: 1