Recent Patents on Thin Coal Seam Mining Equipment

Author(s): Yanxiang Wang, Daolong Yang*, Bangsheng Xing, Tingting Zhao, Zhiyi Sun, Qianqian Huang, Qian Li

Journal Name: Recent Patents on Mechanical Engineering

Volume 13 , Issue 2 , 2020

Become EABM
Become Reviewer

Abstract:

Background: China's thin and extremely thin coal seam resources are widely distributed and rich in reserves. These coal seams account for 20% of the recoverable reserves, with 9.83 billion tons of industrial reserves and 6.15 billion tons of recoverable reserves.

Objective: Due to the complex geological conditions of the thin coal seam, the plow mining method cannot be effectively popularized, and the drum mining method is difficult to be popularized and applied in small and medium-sized coal mines, so it is necessary to find other more advantageous alternative mining methods.

Methods: The equipment integrates mining operations, conveying operations, and supporting operations, and is suitable for mining short and extremely thin coal seam with a height of 0.35m-0.8m and width of 2m-20m. It has the advantages of the low body of the shearer, no additional support on the working face, and small underground space. The mining efficiency of thin coal seam and very thin coal seam can be improved and the mining cost can be reduced.

Results: Thin coal seam shear mining combines mining, conveying, and supporting processes together and has the advantages of a low fuselage, no extra support required for the working face, and feasibility in a small underground space.

Conclusion: The summarized mining method can improve the mining efficiency of thin and extremely thin coal seams, reduce mining costs, and incorporate green mining practices, which take both mining economy and safety into account.

Keywords: Coal mining, coal mining machinery, comprehensive mechanized coal mining, cutting, patents, thin and extremely thin coal seams, thin coal seam mining equipment.

[1]
Sun QG, Guan XM, Zhang RH, Zhang QL. Coal drill machine. CN101705820 (2012).
[2]
Zhang JJ, Li YC, Shao CH, Ma Y. Rolling groove for mining very thin coal seam. CN102828774 ((2012)).
[3]
Zhang JJ, Ma Y, Shao CH, Wu H, Sun L, Dang YD. Conveyor chute. CN204078666 ((2015)).
[4]
Mao ZW, Liu X, Wu JC, Chen XY. Shearer rocker height adjustment mechanism. CN202673291 ((2013)).
[5]
Wang JG, Feng C, Ran B, et al. Integrated mining technology for extremely thin seam. CN103195428 ((2013)).
[6]
Wang YH, Mao BB, Li JQ, Xu G, Fan Z. Extremely thin coal seam hydraulic support. CN103277127 (2013).
[7]
Miao XX, Zhou YJ, Zhou YC, et al. Ultra-thin coal seam filling mining hydraulic support high-speed throwing device. CN203257462 (2013).
[8]
Yang DL, Li JP, Du CL, et al. The utility model relates to a filling bit of a drill-type coal mining machine. CN104074516 (2014).
[9]
Zhao YJ, Qin G. Chain scraper conveyor. CN204212805 (2015).
[10]
Zhao YJ, Qin G. Mining conveyor. CN204267090 (2015).
[11]
Liu F, Shi CX. Very thin seam coal mining machine. CN204327089 (2015).
[12]
Li JP, Yang DL, Hu JZ, et al. A multi-bit interchangeability equipment and a method for a drill-type coal mining machine. CN104747070 (2015).
[13]
Xu YF. Novel scraping plate type coal mining machine and corollary equipment. CN106761735 (2017).
[14]
Couchoud T, Edekmann TJ, Rennkamp PM, Cousseau FR. Device and method for advancing a cavity in underground mining. CA3006894 (2017).
[15]
Zhang N, Han CL, Yang K, Xie ZZ. Self-drilling and selfanchoring extensible anchor rod applicable to soft and weak coal rocks and anchoring method thereof. CA2995108 (2018).
[16]
Zhang N, Xie ZZ, Han CL. Reaming and self-rotating anchor rod and using method thereof. AU2017301081 (2018).
[17]
Zhang N, Ma P, Han CL, Xie ZZ. Extensible Reaming self-anchoring anchor rod and supporting method thereof. AU2017301079 (2018).
[18]
Zhang N, Xie ZZ, Han CL. Reaming and self-rotating anchor rod and using method thereof. AU2017301081 (2018).
[19]
Bischof A, Galler T, Kupper M. Mesh handling device for mining or tunneling equipment. AU2016394647 (2018).
[20]
He M, Yang J, Chen SY, Zhang H. Equipment system for noroadway no-coal-pillar retained roadway mining method. US2018187548 (2018).
[21]
Hice GA, Hice TJ. Low-frequency pulsing sonic and hydraulic mining method. US9995127 (2018).
[22]
Wang L, Xie GX, Zhu CQ. Hydraulic support for soil-like coal working face, and protection method for coal seam mining. WO201809465 (2018).
[23]
Cao ZK, Zhao XD, Wang ZY, et al. Crossheading is reprinted entry prebreaker and is constructed. CN207275783 (2018).
[24]
Qin BT, Zhuo H, Shi GL, et al. Comprehensive method for controlling air leakage in goal area during shallow and close coal seam mining process. WO2018133435 (2018).
[25]
Sun RG, Yang CL, Liu GZ, et al. Cross-boundary hydraulic support and four-connecting-rod seamless butt-joint structure thereof. CN107939431 (2018).
[26]
Sun RG, Yang CL, Liu GZ, et al. Two-column hydraulic support with double-position balancing jack. CN107939430 (2018).
[27]
Bob C. Remote command and control center for longwall mining system. WO2018118154/ (2018).
[28]
Anferov BA, Kuznetsova LV. Method for development of a high slope coal layer by flows on the skate and section of the shield support of the mining face for its implementation. RU2651831 (2018).
[29]
Anferov BA, Kuznetsova LV. Method of open-underground development of coal bed, lying in the form of Brach syncline. RU2651833 (2018).
[30]
Arsentev VA, Gerasimov AM, Dmitriev SV, Mezenin AO, Ustinov ID. Method of dry beneficiation of high-ash coal. RU2651827 (2018).
[31]
Zhang JX, Zhang Q, Sun Q, Mei XC. Design method for mining upper protective seam close to total rock for use in coal-bed mining. AU2016405113 (2018).
[32]
Hao SF, Li ML, Yang QF, Jiang CR. Mining thermal imagery analysis safety supervision system. CN207283706 (2018).
[33]
Liu MH, Zhao SD, Liang HQ, Ma PY, Yu JX. Automatic machine-following photographing method for fully mechanized coal mining face, device and system thereof. CN107943108 (2018).
[34]
Zhang JM, Xu LJ, Li JW, et al. Stuff sampler based on coal gangue stone fills land reclamation coal mining subsidence area. CN207280783 (2018).
[35]
Jiang B, Shi CG, Jin TZ, et al. Efficient-braking stable coal mining machine. CN107939389 (2018).
[36]
Jiang B, Pan BF, Han J, et al. Freely-liftable cover plate reinforced coal mining machine. CN107956473 (2018).
[37]
Jiang B, Mou HH, Sun FL, et al. Efficient-braking reinforced coal mining machine. CN107882558 (2018).
[38]
Li JB, Zhao YJ, Zhang MC, Wang WF, Chen LL. Fullymechanized coal mining equipment installation method. CN107939400 (2018).
[39]
Ha L, Wei J. Continuous coal mining machine shoveling plate. CN207268174 (2018).
[40]
Chen H, Yu JX, Ma PY, Huang JF, Li M. Recognition method, device and system for fully-mechanized coal mining equipment, gateway, and storage medium. CN107959620 (2018).
[41]
Koryaga MG, Lyubogoshchev VI, Lyubogoshchev MV, Domrachev AN. Method for mine sloping inclined high coal beds in hydro mining. RU2651746 (2018).
[42]
Feng JF, Xiao LP, Xu YL, Cao AM, Liu JB. Coal mine tunnel baseplate prestressed-rebar support method for preventing heaving floors. CN107965332 (2018).
[43]
Guo WX, Shi T, Li G, et al. Arch tunnel drivage non-repeatedsupport self-moving complete equipment. CN107965342 (2018).
[44]
Chen GX. Breaker is synthesized to mining lump coal. CN207271309 (2018).
[45]
Li TL, Luo CJ. Multiple axial of mining reducer shaft end machinery labyrinth sealing structure. CN207278846 (2018).
[46]
Chen Y. Battery equipment applied to coal mine industry. CN107959067 (2018).
[47]
Liu GZ, Yang CL, Sun RG, et al. High-span-limit high-magnification-ratio largeinclination angle efficient fully mechanized mining supporting equipment. CN107939433 (2018).
[48]
Gui BG, He YN, Ren J, Sun YC. Three-arm drill bit structure and drill carriage. CN107939285 (2018).
[49]
Huang KJ, Jin SY, Zhao MY, et al. Remained small coal pillar comprehensive mechanized coal mining supporting structure and construction method. CN107905807 (2018).
[50]
Zhou TF, Xu RH, Gao M, Bi HT. Method for more than 5m big faults during overhead mining of large mining and high fully mechanized coal mining face of three-soft coal seam. CN107905816 (2018).
[51]
Zhao WS, Li SB, Zhang SX, Li S, Cao GQ, Fu Z. Fully mechanized mining face advancing degree detection system and method. CN107905846 (2018).
[52]
Wang XM, Li SB, Huang ZH, Feng YH, Wang F. Coal mining method and system based on transparent working face. CN107905786 (2018).
[53]
Sun JP. Disaster warning system of coal mining working surface based on ranging measurement and velocity measurement. CN107795336 (2018).
[54]
Yang SG, Li W, Jia N, Ben QW, Xia LJ. Scraper conveyor chain tensioning device having sweeping function. US2018079598 (2018).
[55]
Li QP. Cutting tooth throwing-disengaging-preventing device for coal mining machine. CN107842365 (2018).
[56]
Li LQ, Li HB, Tang RL, et al. Filling and water-holding coal mining filler and application thereof. CN107857525 (2018).
[57]
Zhang XW, Xue QS, Yu DW, et al. Slide way type excavator and coal mining, conveying system. CN207228209 (2018).
[58]
Zhang XH, Zheng ZM, Zhang TC, Zhen F, Xing EJ. Mining vehicle-mounted multifunctional fire preventing and extinguishing apparatus. CN107961465 (2018).
[59]
Yang DL, Wang YX, Xing BS. Knife type cutting pick capable of measuring cutting temperature. CN107780933 (2018).
[60]
Li YM, Yang YL, Bai WY. Hydraulic support suitable for steep-grade coal mining. CN207212372 (2018).
[61]
Liu WQ, Liu DR, Wang Z, et al. Novel artific1al ore pillar of combined type. CN207194924 In: (2018).
[62]
Qi YH, Wu ST, Yang SY, Sun Y, Liu J, Wang C. Realize hydraulic support electrohydraulic control's controller. CN207194932 (2018).
[63]
Qi HG, Cai F, Gong SC, et al. Mining/setting-up integrated mining technology without tunneling and coal pillar. CN107882565 (2018).
[64]
Liu YD, Zhang DS, Ma LQ, Zhao YF, Wang HS. Classification of short-wall continuous mechanical mining in shallowly buried coal seam with thin bedrock. J China Univ Mining Technol 2008; 18(3): 389-94.
[65]
Zhang HY, Yang GL, Guo Y. Numerical simulation of dewatering thick unconsolidated aquifers for safety of underground coal mining. Min Sci Technol 2009; 19(3): 312-6.
[66]
Wang GM, Jiao SL, Cheng GG. Fully mechanized coal mining technology for thin coal seam under complicated geological conditions. Energ Explor Exploit 2011; 29(2): 169-78.
[http://dx.doi.org/10.1260/0144-5987.29.2.169]
[67]
Wang F, Tu S, Bai Q. Practice and prospects of fully mechanized mining technology for thin coal seams in China. J South Afr Inst Min Metall 2012; 112(2): 161-70.
[68]
Yang WF, Xia XH. Prediction of mining subsidence under thin bedrocks and thick unconsolidated layers based on field measurement and artificial neural networks. Comput Geosci 2013; 52: 199-203.
[http://dx.doi.org/10.1016/j.cageo.2012.10.017]
[69]
Wan L, Ren LH, Zeng QG, Wang L. Study on selective mining of coal and gangue and strip-filling technology for thin seam. Energy Educ Sci Technol Part A Energy Sci Res 2014; 32(1): 7-12.
[70]
Zhao TB, Zhang ZY, Tan YL, Shi CZ, Wei P, Li Q. An innovative approach to thin coal seam mining of complex geological conditions by pressure regulation. Int J Rock Mech Min Sci 2014; 71: 249-57.
[http://dx.doi.org/10.1016/j.ijrmms.2014.05.021]
[71]
Li QL, Peng SP, Zou GG. High resolution processing of 3D seismic data for thin coal seam in Guqiao coal mine. J Appl Geophys 2015; 115: 32-9.
[http://dx.doi.org/10.1016/j.jappgeo.2015.02.014]
[72]
Yang DL, Li JP, Wang LP, Gao KD, Tang YH, Wang YX. Experimental and theoretical design for decreasing wear in conical picks in rotation-drilling cutting process. Int J Adv Manuf Technol 2015; 77(9-12): 1571-9.
[http://dx.doi.org/10.1007/s00170-014-6472-5]
[73]
Yang DL, Li JP, Du CL, Liu SY, Zheng KH, Jiang HX. Wear performance of conical pick in rotary-drilling cutting process. Electron J Geotech Eng 2015; 20(8): 2031-40.
[74]
Yang DL, Li JP, Wang YX, Jiang HX. Research on vibration and deflection for drilling tools of coal auger. J Vibroeng 2017; 19(7): 4882-97.
[http://dx.doi.org/10.21595/jve.2017.18581]
[75]
Yang DL, Li JP, Xing BS, Wang YX. Recent patents on gangue pneumatic filling for coal auger mining method. Recent Pat Mech Eng 2018; 11(1): 31-40.
[http://dx.doi.org/10.2174/2212797611666180118094926]
[76]
Jin W. Research on the application of thin coal seam roller mining equipment. Coal Mine Modern 2018; 5: 57-9.
[77]
Wang BM, Hou G, Zhang JH, Nan HY. Study of complete sets key technology and equipment of intelligent mining under harden thin coal seam. Coal Mining 2018; 23(4): 1-3.
[78]
Duan XG. Improvement and application of complete equipment for mechanized mining of thin coal seam. Mech Manag Develop 2018; 33(10): 129-30.
[79]
Long TX. Research and application of fully-mechanized mining automation equipment in thin coal seam. Mech Manag Develop 2019; 34(6): 224-5.
[80]
Pan TW, Wang W, Gao B. Yang Cun of fully mechanized coal mining in thin coal seam face edge increase the application equipment technology. Coal Mine Modern 2019; 4: 25-6.
[81]
Liang JJ. Research on key technology of mechanic equipment for fully mechanized coal mining in thin coal seam. Mech Manag Develop 2019; 34(1): 213-4.


Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 13
ISSUE: 2
Year: 2020
Page: [99 - 108]
Pages: 10
DOI: 10.2174/2212797613666200221143251
Price: $25

Article Metrics

PDF: 8
HTML: 1