Guo XN, Tang GQ, Gao LF, Zhang XD. Design and analysis of 3-RRRPP parallel mechanism for ankle rehabilitation. Elect Drive Automat 2017; 47(5): 181-97.
Kang LL, Luo YP, Wang ZQ, Liu Y. 3-DOF vehicle seat and vibration characteristics research. Light Industry Machinery 2017; 35(2): 20-5.
Wei B. Multi-objective optimization and stiffness performance analysis
for 3-DOP parallel manipulators. BS Dissertation, Hebei University
of Engineering, Handan, China, May 2013.
Ye W, Li QC, Chen ZS, He YY. A three - degree - freedom robot for minimally invasive surgery. CN107049495 (2017)..
Du JF, Yu XH, Pei ZH, Gui L, Wang J. A test method for
dynamic characteristics of three-axis flight simulator in hardware in
the loop simulation test. CN107024922 (2017)..
Liu YJ, Qiong M, Nie HP, Li JH. A three-degree-freedom
parallel platform and its control method and control device.
Liu JM, Liu DS, Wang ZW. A VR game seat. CN107198877 (2017)..
Ding RF. A three-degree-freedom simulation seat. CN107308649 (2017)..
Yang ZH. Synthesis of several 3-DOF parallel mechanism with continuous
motion. BS Dissertation, Yanshan University, Hebei, China,
Liu XF. Dynamics analysis and control strategy research of redundantly actuated parallel manipulator PhD Dissertation, Yanshan University,Hebei, China, December. 2019.
Wang QM. Research on performance analysis and control strategy of
a novel redundant 6-DOF parallel mechanism. PhD Dissertation, Jilin
University, Jilin, China, December 2017.
Guo XN. Performance analysis of a six degrees of freedom redundant hybrid machine tool mechanism BS Dissertation, North University of China, Shanxi, China, May . 2019.
Luces M, Boyraz P, Mahmoodi M, Keramati F, Mills JK, Benhabib B. An emulator-based prediction of dynamic stiffness for redundant parallel kinematic mechanisms. J Mech Robot 2015; 8: 22-3.
Ji MY. Research on the configuration and control strategy of three degree of freedom redundant parallel mechanism BS Dissertation, Harbin institute of technology, Harbin, China, June. 2018.
Chen XL, Jiang DY, Chen LL, Wang Q. Kinematics performance analysis and optimal design of redundant actuation parallel mechanism. Trans Chin Soc Agric Mach 2016; 47(6): 340-6.
Qin CY, Huang J, Li XR. A new type of closed-loop limb redundant parallel mechanism. J Mech Transm 2019; 43(7): 84-90.
Li YQ, Zhang Y, Wang YX, Zhang LJ. Elastodynamic analysis on the planar 2-DOF redundant actuated parallel mechanism. J Mech Des 2019; 36(9): 21-8.
Liu YM. Synthesis and optimization of some kinds of lower-mobility redundant actuation parallel mechanisms PhD Dissertation, Yanshan University, Hebei, China, May . 2016.
Qiu ZC, Yu LH. Redundant planar parallel mechanism control device and method of hybrid drive. CN107263446 2017.
Li XR, Huang J, Li XH. Kinematics and workspace analysis of a new type of 3-DOF redundant parallel mechanism. J Mech Transm 2019; 43(7): 130-5.
Lu JW, Zhang L, Su DF. The kinematics study of a parallel platform with three degree of freedom. Des Res Anal 2018; 4: 55-9.
Shen HK, Huang QL, Ding W, Tong LF, Yao YA. Locomotion feasibility and simulation analysis for a rolling parallel mechanism with hydraulic driven. J Cent South Univ (Sci Technol) 2016; 47(6): 1906-14.
Tang K, Wan XJ, Lu K. Singularity and statics analysis of redundant parallel mechanism. J Mech Transm 2019; 43(1): 44-9.
Huang JJ, Hu BW, Song JD. A solving method for forward kinematics of 3-PRS parallel mechanism. J Mech Transm 2019; 8: 98-102.
Wang HM. Research on the type synthesis of lower-mobility generalized decoupling parallel mechanism with three rotational degree of freedom BS Dissertation, Yanshan University, Hebei, China, May. 2017.
Zhao HL, Chen Q, He YH, Jiang JB, Zhang YL, Zhu H. six-degree-freedom manipulator based on parallel mechanism.
Wang B. A reconfigurable parallel mechanism. CN107297731 (2017)..
Wang D, Fan R. Design and nonlinear analysis of a 6-DOF compliant parallel manipulator with spatial beam flexure hinges. Precis Eng 2016; 45: 365-73.
Research on kinematics of spatial 3-DOF parallel mechanism. BS Dissertation, Xi'an Polytechnic University, Xi'an, China, March 2017.
Hong ZY, Gao X, Liu JR, Zhang DS, Zhang ZX. Dynamic modeling
and parameter identification of a 3-DOF flight simulator platform. P I
Mech Eng K-J Mul 2019; 233(4): 968-78.
Rong Y, Liu SY, Wang HB, Han Y. Development of a 3-DOF parallel manipulator. China Mech E 2018; 29(3): 253-61.
Xiong W, Chen ZT, Wu H. Xu G, Ding T, Mei HP, Li YM. Solution to the motion of a delta manipulator with three degrees of freedom. Joint Symposium of the 8th International Conference of the Chinese-
Society-of-Micro-Nano-Technology (CSMNT) / Microsystems and
Nanoengineering Summit (MAN) / Symposium of Materials Science and Technology (SOMST). Tianjin, China. October, 2017.
Shen YN, Yu Z, Li J, Ye F, Geng L, Wang ZR. Kinematics analysis of a redundant constrained parallel mechanism. Ind Contr Comput 2019; 32(9): 38-9.
Mahdi B, Farzin T, Niloofar A. Dynamic analysis of a hybrid cable-suspended planar manipulator. IEEE International Conference on Robotics and Automation. Seattle, USA. July,. 2015.
Zakia H, Norsinnira ZA. KANE’s method for dynamic modeling. IEEE International Conference on Automatic Control and Intelligent Systems. Selangor, Malaysia. November, 2016.
Zhang FT, Shi GM, Han YF. Dynamics performance optimize of delta parallel mechanism. J Mech Strength 2016; 38(5): 996-1000.
Qin J, Li J, Li WD, Hu HY, Liu L, Sun LN. Dynamics modeling and study of 2-DOF parallel manipulator. Mod Manuf Eng 2015; 2: 43-7.
Mauricio BV, Atila MB, Otavio DV, José MB. Robust joint space control of a 6 DOF parallel robot. IEEE Conference on Control Applications. Buenos Aires, Argentina. October,. 2016.
Heng C, Yan BN. A Control method research of parallel mechanisms. Adv Mat Res 2012; 619: 51-5.
Lukic B, Petric T, Zlajph L, Jovanovic K. KUKA LWR Robot Cartesian Stiffness Control Based on Kinematic Redundancy. 28th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). Kaiserslautern, Germany. May,.2019.
Ayyildiz EA, Ayyildiz M. Development of a 3-axis parallel kinematic machine for milling wood material - Part 1: Design. BioResources 2017; 12(4): 9326-37.
Zhu CC, Song AG. Design of a 3-DOF parallel hand-controller. J Sens 2017; 2017: Article ID 8162512
Wang J. A compound 3D printer based on double rotating shaft of
DELTA mechanism. CN106738919 2017.
Xie ML, Ge RD, Wang R. Wang, Y.F., Zhang, W.P., Ma, S.S., Yan, X.R., Zheng, B.W. A . A delta sorting manipulator based on machine
vision. CN106423916 2017.
Zhou L, Qiong BH, Cao YJ. A dynamic balancing device and
method for DELTA robot. CN106423916 2017.
Liu XK. Research on delta parallel robot control system BS Dissertation,
Beijing University of Civil Engineering and Architecture, Beijing,
China, June. 2018.
Laski PA, Zwierzchowski J, Pietrala DS. Development of Delta-type parallel robot using pneumatic artificial muscles in application for rehabilitation. 24th International Conference on Engineering Mechanics. Svratka, Czech Republic. May,.2018.
Zhang GQ, Wang HT, Huang P. Workspace modeling and calculation method of delta parallel manipulator under mechanical constraint. Mach Tool Hydraul 2019; 47(17): 12-5.
Liu K. Analysis and simulation on kinematics of 3-PSS parallel robot.
BS Dissertation, College of Mechanical Engineering of Chongqing,
Chongqing, May 2015.