Characteristics of Nano-metal Colloid Prepared by Electrical Spark Discharge Method

Author(s): Kuo-Hsiung Tseng*, Meng-Yun Chung

Journal Name: Current Nanoscience

Volume 16 , Issue 6 , 2020

Become EABM
Become Reviewer

Graphical Abstract:


Abstract:

Background: This study used Electrical Spark Discharge Method (ESDM) to fabricate the nano-Au, nano-Ag and nano-Cu colloid. The spark wears down the surface of the electrodes and gets nano-metal particles at standard temperature and pressure and without adding any other chemical materials in the deionized water.

Methods: The nano-metal particles are examined by UV-Visible Spectroscopy, Zetasizer, Transmission Electron Microscope, and Energy Dispersive X-ray Analysis and are proven to be nano-metal colloid. Under the comparison of different parameters (discharge pulse width, HV, Ip), the size of nano-metal particles increases with the level of Ip.

Results: Under the experiment of light or dark, most of the Absorbance of the nano-Au and nano-Ag colloid is higher than that of the environment under strong light irradiation as long as it is prepared in a pure black environment. The nano-Au and nano-Ag colloid prepared by ESDM have a zeta potential exceeding the absolute value of 30 mV, no matter which parameter is applied or whether there is illumination or not.

Conclusion: It represents a good suspension stability of the nano-Au and nano-Ag colloid, but the nano-Cu colloid does not have this feature. The suspension stability is not good.

Keywords: Electrical spark discharge method, nano-au colloid, nano-ag colloid, nano-cu colloid, illumination, absorbance.

open access plus

Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 16
ISSUE: 6
Year: 2020
Published on: 02 February, 2021
Page: [890 - 911]
Pages: 22
DOI: 10.2174/1573413715666191114124120

Article Metrics

PDF: 18