Efficient Solar Integrated Doubly Fed Induction Generator for Wind Energy Harnessing

Author(s): Arjun Kumar*, Shivashankar, Bhagwan S. Ram

Journal Name: Recent Advances in Electrical & Electronic Engineering
Formerly Recent Patents on Electrical & Electronic Engineering

Volume 13 , Issue 5 , 2020


Become EABM
Become Reviewer
Call for Editor

Graphical Abstract:


Abstract:

Background: Doubly-Fed Induction Generator (DFIG) is a dual input conventional asynchronous device connected across both stator and rotor, which also functions as an electrical transducer consuming up-to 30 % of the generated power during the rotor injection. This is the major concern with respect to the DFIG in terms of effective power generation.

Methods: The proposed work provides the solution for this undesirable power loss by connecting the DFIG with an array of solar Photovoltaic (PV) panel through a conventional direct current bus using a boost converter. This research setup can work on the basis of indirect vector control algorithms applied at the rotor and grid converter level in order to maintain the constant DC voltage under arbitrary conditions.

Results: Even the variations in voltage and frequency will be controlled with this novel approach. A simulation model of the 300KW solar PV array and a 2MW DFIG system is developed using MATLAB/Simulink environment.

Conclusion: Solar and wind energy sources incorporate Maximum Power Point Tracking (MPPT) through their control algorithms resulting in the add on 30-80 KW of solar power for rotor injection compared to the existing system in order to reduce the power rating of the converters and power consumption from the grid.

Keywords: Doubly-fed induction generator, solar power, boost converter, rotor side converter, grid side control, photovoltaic, DC, Maximum power point tracking.

[1]
M. Sleiman, B. Kedjar, A. Hamadi, K. Al-Haddad, and H.Y. Kanaan, "Modeling control and simulation of DFIG for maximum power point tracking", IEEE ASCC Conf.,, 2013, pp. 1-6
[http://dx.doi.org/10.1109/ASCC.2013.6606327]
[2]
B. Singh, S.K. Aggarwal, and T.C. Kandpal, "Performance of wind energy conversion system using a doubly Fed induction generator for maximum power point tracking", Indust. Appl. Soc. Annual Meeting (IAS),, 2010, pp. , 1-7
[http://dx.doi.org/10.1109/IAS.2010.5614738]
[3]
World Wind Energy Association (WWEA) Global statistics, ,, 2018.Available at: , https://library.wwindea.org/global-statistics-2018 preliminary/
[4]
B. Babu, and S. Divya, "Comparative study of different types of generators used in wind turbine and reactive power compensation", National Conference on Emerging Research Trends in Electrical, Electronics Instrumentation,, 2017, pp. , 95-99
[5]
T. Ikegami C.T. Urabe T. Saitou and K. Ogimoto, "Numerical definitions of wind power output fluctuations for power system operations", J. Renew. Energy,, vol. 115, pp. 6-15, 2018.
[6]
C.W. Tan, T.C. Green, and C.A. Hernandez-Aramburo, "Analysis of perturb and observe maximum power point tracking algorithm for photovoltaic applications", IEEE Int. Conf. Power Energy,, 2008
[7]
D. Lu, S. Sathiakumar, R.H. Chu, and V.G. Agelidis, "A Buck Converter with Simple Maximum Power Point Tracking for Power Electronics Education on Solar Energy Systems In: ", 2007 Australasian Universities Power Engineering Conference, Perth, WA, Australia, 2007
[http://dx.doi.org/10.1109/AUPEC.2007.4548059]
[8]
S. Li, and T.A. Haskew, Analysis of Decoupled d-q Vector Control inDFIG Back-to-Back PWM Converter. In: Power Engineering Society General Meeting.,, IEEE, 2007, pp. 1-7.
[9]
Y. Lei, A. Mullane, G. Lightbody, and R. Yacamini, "Modeling of the wind turbine with a doubly fed induction generator for grid integration studies", IEEE Trans. Energ. Convers.,, vol. 21, no. 1, pp. 257-264, 2006.
[http://dx.doi.org/10.1109/TEC.2005.847958]
[10]
M. Rezkallah, S. Sharma, A. Chandra, and B. Singh, "Implementation and control of small-scale hybrid standalone power generation system employing wind and solar energy ", In: , 2016 IEEE Industry Applications Society Annual Meeting,, 2016,pp. 1-7
[http://dx.doi.org/10.1109/IAS.2016.7731835]
[11]
M. Das, and V. Agarwal, "Novel high-performance stand-alone solar PV system with high-gain high-efficiency DC-DC converter power stages", IEEE Trans. Ind. Appl.,, vol. 51, no. 6, pp. 4718-4728, 2015. Available at:
[http://dx.doi.org/10.1109/TIA.2015.2454488] [http://dx.doi.org/10.1109/TIA.2015.2454488]
[12]
Z. Xuesong, D. Song, Y. Ma, and D. Cheng, "The simulation and design for MPPT of PV system based on incremental conductance method", WASE Inter. Conf. Inform. Engineering, , 2010, pp. 314- 317.
[http://dx.doi.org/10.1109/ICIE.2010.170]
[13]
S. Ghosh, and S. Kamalasadan, "An energy function-based optimal control strategy for output stabilization of integrated DFIG fly wheel energy storage system", IEEE Trans. Smart Grid,, vol. 8, no. 4, pp. 1922-1931, 2017.
[http://dx.doi.org/10.1109/TSG.2015.2510866]
[14]
S.M. Barakati, M. Kazerani, and J.D. Aplevich, "Maximum power tracking control for a wind turbine system including a matrix converter", IEEE Trans. Energ. Convers.,, vol. 24, pp. 705-713, 2009.
[http://dx.doi.org/10.1109/TEC.2008.2005316]
[15]
F.M. Hughes, O. Anaya-Lara, N. Jenkins, and G. Strbac, "A power system stabilizer for DFIG-basedwind generation", IEEE Trans. Power Syst.,, vol. 21, pp. 763-772, 2006.
[http://dx.doi.org/10.1109/TPWRS.2006.873037]
[16]
M. Soliman, O.P. Malik, and D.T. Westwick, "Multiple model predictive control for wind turbines with doubly fed induction generators", IEEE Trans. Sustain. Energy,, vol. 2, pp. 215-225, 2011.
[http://dx.doi.org/10.1109/TSTE.2011.2153217]
[17]
B. Wu, Y. Lang, N. Zargari, and S. Kouro, Power Conversion and Control of Wind Energy System.,, Wiley: Hoboken, NJ, USA, 2011.
[http://dx.doi.org/10.1002/9781118029008]
[18]
G. Abad, J. López, M.A. Rodríguez, L. Marroyo, and G. Iwanski, Doubly Fed Induction Machine: Modelling and Control for Wind Energy Generation.,, JohnWiley &Sons: Hoboken, NJ, USA, 2011.
[http://dx.doi.org/10.1002/9781118104965]
[19]
N.S. D’Souza, L.A.C. Lopes, and X. Liu, "An intelligent maximum power point tracker using peak current control", In: ; 2005 IEEE 36th Power Electronics Specialists Conference , Recife, Brazil, 2005, pp. 172-177.
[20]
S.H. Song, B.C. Jeong, H.I. Lee, J.J. Kim, J.H. Oh, and G. Venkataramanan, "Emulation of output characteristics of rotor blades using a hardware-in-loop wind turbine simulator ", In: , Twentieth Annual IEEE Applied Power Electronics Conference and Exposition,. Austin, TX, USA Vol.3, 2005, pp. 1791-796
[21]
P. Mercorelli, "An adaptive and optimized switching observer for sensorless control of an electromagnetic valve actuator in camless internal combustion engines", Asian J. Control,, vol. 16, no. 4, pp. 959-973, 2014.
[http://dx.doi.org/10.1002/asjc.772]
[22]
P. Mercorelli, and N. Werner, "An adaptive resonance regulator design for motion control of intake valves in camless engine systems", IEEE Trans. Ind. Electron.,, vol. 64, no. 4, pp. 3413-3422, 2017.
[http://dx.doi.org/10.1109/TIE.2016.2606091]
[23]
J. Adhikari, R. Sapkota, and S.K. Panda, "Impact of altitude and power rating on power-to-weight and power-to-cost ratios of the high altitude wind power generating system", Renew. Energy,, vol. 115, pp. 16-27, 2018.
[24]
X. Jin, Y. Wang, W. Ju, J. He, and S. Xie, "Investigation into parameter influence of upstream deflector on vertical axis wind turbines output power via three-dimensional CFD simulation", Renew. Energy,, vol. 115, pp. 41-53, 2018.
[http://dx.doi.org/10.1016/j.renene.2017.08.012]
[25]
M.S. Alam, and M.A.Y. Abido, "Fault ride-through capability enhancement of a large-scale PMSG wind system with bridge type fault current limiters", Adv. Elec. Comput. Eng., ,, vol. 18, no. 1, pp. 43-50.
[26]
P. Nammalvar, and S. Ramkumar, "Parameter improved particle swarm optimization based direct-current vector control strategy for solar PV system", Adv. Electr. Comput. Eng.,, vol. 18, no. 1, pp. 105-112, 2018.
[http://dx.doi.org/10.4316/AECE.2018.01013]


promotion: free to download

Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 13
ISSUE: 5
Year: 2020
Published on: 21 September, 2020
Page: [723 - 735]
Pages: 13
DOI: 10.2174/2352096512666191019094707

Article Metrics

PDF: 18
HTML: 2