Generic placeholder image

Innovations in Corrosion and Materials Science (Discontinued)

Editor-in-Chief

ISSN (Print): 2352-0949
ISSN (Online): 2352-0957

Research Article

Polymethylhydrosiloxane Coating Enhanced Corrosion Resistance of Hydrofluoric Acid Treated Mg Bio-implant Material in Simulated Body Fluid Solution

Author(s): Manjubala Bharti and Ranjan K Sahu*

Volume 9, Issue 1, 2019

Page: [41 - 49] Pages: 9

DOI: 10.2174/2352094909666190527121245

Abstract

Background: Deceleration of the corrosion rate of Mg by surface chemical method via hydrofluoric acid treatment has a special interest because it is a simple, cost-effective, and efficient method for the coating of interior as well as the exterior part of any size and shape of implant material. However, conversion coating by hydrofluoric acid treatment fails to produce a long-term stable coating of Mg in ionic solutions caused by the formation of cracks on the surface during the process. Consequently, the corrosive ions of the SBF solution enter through the cracks that accelerate the dissolution by local galvanic corrosion. On the above view, we aim to develop a simple strategy for enhancement of corrosion resistance of the hydrofluoric acid treated Mg bioimplant material.

Methods: This method is comprised of dip coating of hydrofluoric acid treated Mg sample in the polymethylhydrosiloxane followed by curing at 170°C for 30 min. The samples were characterized by electron probe microanalysis, X-ray photoelectron spectroscopy and electrochemical test.

Results: The electrochemical test results reveal that the corrosion rate of the coated Mg sample in the simulated body fluid solution is decreased by more than 8500 times than the bare sample. The long term immersion data indicate that the chemical resistance of the coated Mg sample in the SBF solution even after 25 days is better than the bare Mg metal.

Conclusion: Polymethylhydrosiloxane coating is efficient to enhance the corrosion resistance of hydrofluoric acid treated Mg metal in simulated body fluid solution.

Keywords: Biomaterials, magnesium metal, corrosion resistance, HF coating, electrochemical test, polymethylhydrosiloxane coating.

Graphical Abstract
[1]
M.P. Staiger, A.M. Pietak, J. Huadmai, and G. Dias, "Magnesium and its alloys as orthopedic biomaterials: a review", Biomaterials, vol. 27, no. 9, pp. 1728-1734, 2006.
[2]
M. Esmaily, J.E. Svensson, S. Fajardo, N. Birbilis, G.S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, and L.G. Johansson, "Fundamentals and advances in magnesium alloy corrosion", Prog. Mater. Sci., vol. 89, pp. 92-193, 2017.
[3]
Y. Song, D. Shan, R. Chen, F. Zhang, and E. Han, "Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid", Mater. Sci. Eng. C, vol. 29, pp. 1039-1045, 2009.
[4]
E. Zhang, D. Yin, L. Xu, L. Yang, and K. Yang, "Microstructure, mechanical and corrosion properties and biocompatibility of Mg–Zn–Mn alloys for biomedical application", Mater. Sci. Eng. C, vol. 29, pp. 987-993, 2009.
[5]
Y. Yang, X. Guo, C. He, C. Gao, and C. Shuai, "Regulating degradation behavior by incorporating mesoporous silica for Mg bone implants", ACS Biomater. Sci. Eng., vol. 4, pp. 1046-1054, 2018.
[6]
H. Hornberger, S. Virtanen, and A.R. Boccaccini, "Biomedical coatings on magnesium alloys - a review", Acta Biomater., vol. 8, no. 7, pp. 2442-2455, 2012.
[7]
Y. Wang, M. Wei, J. Gao, J. Hu, and Y. Zhang, "Corrosion process of pure magnesium in simulated body fluid", Mater. Lett., vol. 62, pp. 2181-2184, 2008.
[8]
J. Ma, M. Thompson, N. Zhao, and D. Zhu, "Similarities and differences in coatings for magnesium-based stents and orthopaedic implants", J. Orthop. Translat., vol. 2, no. 3, pp. 118-130, 2014.
[9]
T. Yan, L. Tan, D. Xiong, X. Liu, B. Zhang, and K. Yang, "Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy", Mater. Sci. Eng. C, vol. 30, pp. 740-748, 2010.
[10]
T.F. da Conceicao, N. Schamagl, C. Blawert, W. Dietzel, and K.U. Kainer, "Surface modification of magnesium alloy AZ31 by hydrofluoric acid treatment and its effect on the corrosion behaviour", Thin Solid Films, vol. 518, pp. 5209-5218, 2010.
[11]
M. Carboneras, M.C. Garcia-Alonso, and M.L. Escudero, "Biodegradation kinetics of modified magnesium-based materials in cell culture medium", Corros. Sci., vol. 53, pp. 1433-1439, 2011.
[12]
K.Y. Chiu, M.H. Wong, F.T. Cheng, and H.C. Man, "Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants", Surf. Coat. Tech., vol. 202, pp. 590-598, 2007.
[13]
Y.L. Cai, J.J. Zhang, S. Zhang, S.S. Venkatraman, X.T. Zeng, H.J. Du, and D. Mondal, "Osteoblastic cell response on fluoridated hydroxyapatite coatings: the effect of magnesium incorporation", Biomed. Mater., vol. 5, no. 5, pp. 054114-054120, 2010.
[14]
E.T. Everett, "Fluoride’s effects on the formation of teeth and bones, and the influence of genetics", J. Dent. Res., vol. 90, no. 5, pp. 552-560, 2011.
[15]
M.D. Grynpas, D. Chachra, and H. Limeback, The action of fluoride on bone.The Osteoporosis Primer., Cambridge University Press, 2000.
[16]
N. Li, Y.D. Li, Y.B. Wang, M. Li, Y. Cheng, Y.H. Wu, and Y.F. Zheng, "Corrosion resistance and cytotoxicity of a MgF2 coating on biomedical Mg–1Ca alloy via vacuum evaporation deposition method", Surf. Interface Anal., vol. 45, pp. 1217-1222, 2013.
[17]
J.E. Gray, and B. Luan, "Protective coatings on magnesium and its alloys-a critical review", J. Alloys Compd., vol. 336, pp. 88-113, 2002.
[18]
Y. Shi, J. Pei, J. Zhang, J. Niu, H. Zhang, S. Guo, Z. Li, and G. Yuan, "Enhanced corrosion resistance and cytocompatibility of biodegradable Mg alloys by introduction of Mg(OH)2 particles into poly (L-lactic acid) coating In: ", Sci. Reports, vol. 7 2017, pp. 41796-41806, .
[19]
P. Makker, H. Kang, A.R. Padalhin, I. Park, B. Moon, and B.T. Lee, "Development and properties of duplex MgF2 / PCL coatings on biodegradable magnesium alloy for biomedical applications", In:", Plos One, vol. 13, . 2018
[20]
S. Nagappan, J.J. Park, S.S. Park, S. Hong, Y.S. Jeong, and W. Lee, "Polymethylhydrosiloxane-based organic–inorganic hybrids for amphiphobic coatings", Comp. Int., vol. 20, pp. 33-43, 2013.
[21]
K.K. Senapati, "Polymethylhydrosiloxane", Synlett, vol. 12, pp. 1960-1961, 2005.
[22]
N. Soltani, U. Simon, A. Bahrami, X. Wang, S. Selve, J.D. Epping, M.I. Pech-Canul, M.F. Bekheet, and A. Gurlo, "Macroporous polymer-derived SiO2/SiOC monoliths freeze-cast from polysiloxane and amorphous silica derived from rice husk", J. Eur. Ceram. Soc., vol. 37, pp. 4809-4820, 2017.
[23]
M. Santamaria, F. Di Quarto, S. Zanna, and P. Marcus, "Initial surface film on magnesium metal: A characterization by X-ray photoelectron spectroscopy (XPS) and photocurrent spectroscopy (PCS)", Electrochim. Acta, vol. 53, pp. 1314-1324, 2007.
[24]
S. Mertin, L. Marot, C.S. Sandu, R. Steiner, and J. Scartezzini, "Nanocrystalline low-refractive magnesium fluoride films deposited by reactive magnetron sputtering: optical and structural properties", Adv. Eng. Mater., vol. 17, pp. 1652-1659, 2015.
[25]
N. Dinodi, and A.N. Shetty, "Electrochemical investigations on the corrosion behaviour of magnesium alloy ZE41 in a combined medium of chloride and sulphate", J. Magnesium & Alloys, vol. 1, pp. 201-209, 2013.
[26]
W. Liu, Z. Yan, X. Ma, T. Geng, H. Wu, and Z. Li, "Mg-MOF-74/MgF2 composite coating for improving the properties of magnesium alloy implants: hydrophilicity and corrosion resistance", Materials (Basel), vol. 11, pp. 396-404, 2018.
[27]
M.G. Fontana, Corrosion Engineering.In., McGraw Hill, 1987.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy