Next Generation Biomimetic Bone Tissue Engineering Matrix From Poly (L- Lactic Acid) Pla/Calcium Carbonate Composites Doped With Silver Nanoparticles

Author(s): M. Enamul Hoque*, J. Mahmoud Ghorban Daei, M. Khalid.

Journal Name: Current Analytical Chemistry

Volume 14 , Issue 3 , 2018

Become EABM
Become Reviewer

Graphical Abstract:


Background: In this study, scaffolds were fabricated using a desktop robot based rapid prototyping (DRBRP) system that was developed in-house. Poly lactic acid (PLA) and calcium carbonate (CaCO3) composites, doped with silver nanoparticles (nAg), were used for the scaffolds. The effect of injection parameters on the porosity rate of both, the single and hybrid scaffolds, were examined. Clearly, the incorporation of 1 wt% of CaCO3, and 0.5 wt% nAg, had no effect on the flow ability of the viscous polymer, and thus optimization was easy. Scanning electron microscopy (SEM) analysis aided in optimizing the process parameters, and therefore improving the surface morphology, and pore structure.

Method: Compression tests were performed to understand the coupled effect of CaCO3 nanoparticles, and the porosity on the mechanical properties of the bulk scaffolds.

Result: The compressive modulus of the PLA/CaCO3/nAg scaffolds reached values of 0.38 GPa, and 0.28 GPa, at porosities of 40 % and 50%, respectively.

Conclusion: Despite the difficulty in reproducing scaffolds with exact porosities, it could be concluded that the stiffness of the hybrid scaffolds increased in comparison to the single PLA scaffolds, at equal porosities.

Keywords: Desktop robot based rapid prototyping, poly lactic acid, calcium carbonate nanoparticles, tissue engineering, scaffolds, bio-compatibility, bioresorbablility, silver nanoparticles, degradation.

Rights & PermissionsPrintExport Cite as

Article Details

Year: 2018
Page: [268 - 277]
Pages: 10
DOI: 10.2174/1573411013666171003155024
Price: $65

Article Metrics

PDF: 18