Login Register Cart 0
Generic placeholder image

Current Dentistry

Editor-in-Chief

ISSN (Print): 2542-579X
ISSN (Online): 2542-5803

Back
Journal Home About Journal Editorial Board Current Issue Volumes/Issues
Subscribe
Research Article

The Influence of Surface Treatments on Resin Bond Strength to Zirconia

Author(s): Ulysses Lenz, Rodrigo Alessandretti and Alvaro Della Bona*

Volume 2, Issue 1, 2020

Page: [29 - 35] Pages: 7

DOI: 10.2174/2542579X02666191218123853

Price: $65

Abstract

Background: It’s shown that the clinical success of ceramic restorations much depends on the quality and durability of the bond to ceramic. For zirconia-based ceramics (Y-TZP), the surface treatment has a substantial impact on bond strength. Therefore, the bond strength evaluation of Y-TZP surface treatments is a requirement for predicting the clinical performance of such restorations.

Objective: Evaluating the resin bond strength to Y-TZP after different surface treatments.

Methods: Monolithic Y-TZP (Zenostar Zr Translucent, Wieland Dental, Rosbach vor der Höhe, Germany) blocks were bonded to resin composite blocks using a resin-based cement system after two Y-TZP surface treatments: APA- airborne particle abrasion with alumina particles; and CJ- silicatization (Cojet sand, 3M ESPE, St. Paul, MN, USA). A silane coupling agent and an adhesive system were applied to the treated Y-TZP surfaces and resin composite blocks were cemented (RelyX Ultimate, 3M ESPE, St. Paul, MN, USA) and light activated from all sides. These structures were cut to obtain bar-shaped specimens (n=30), which were stored in 37ºC distilled water for 7 days before microtensile testing. Specimens were loaded to failure under tension using a universal testing machine. Data was statistically analyzed using Students t test (α=0.05) and Weibull distribution. Failure modes were evaluated using optical (OM) and scanning electron microscopy (SEM).

Results: Mean bond strength values (CJ= 25.7±8.2 MPa; APA= 22.0±6.3 MPa) were statistically similar (p>0.05). No difference was found for the characteristic strengths (σ0) and for Weibull moduli (m) since the confidence intervals (95% CI) overlapped. The bond strength values for a 5% failure probability (σ5%) were 12.4 (CJ) and 11.5 (APA). All fractures were due to cohesive failure within the adhesive cement system.

Conclusion: Both Y-TZP surface treatments (CJ and APA) produced similar structural reliability and short-term bond strength to a resin cement system.

Keywords: Zirconia, ceramics, surface treatment, adhesion, resin composite, Y-TZP.

Graphical Abstract

[1]
Della Bona A, Borba M, Benetti P, Cecchetti D. Effect of surface treatments on the bond strength of a zirconia-reinforced ceramic to composite resin. Braz Oral Res 2007; 21(1): 10-5.
[http://dx.doi.org/10.1590/S1806-83242007000100002 ] [PMID: 17384849]
[2]
Gowida MA, Aboushelib NM. Bonding to zirconia: A systematic review. J Dent Sci 2017; 1(1): 1-20.
[http://dx.doi.org/10.23880/oajds-16000102]
[3]
Belo YD, Sonza QN, Borba M, Della Bona A. Yttria-stabilized tetragonal zirconia: Mechanical behavior, adhesion and clinical longevity. Ceramica 2013; 59(352): 633-9.
[http://dx.doi.org/10.1590/S0366-69132013000400021]
[4]
Della Bona A. Bonding to ceramics: scientific evidences for clinical dentistry. São Paulo: Artes Médicas 2009; Pp. 252..
[5]
Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996; 75(1): 18-32.
[http://dx.doi.org/10.1016/S0022-3913(96)90413-8 ] [PMID: 9005250]
[6]
van Noort R. Introduction to dental materials. Dental Ceramics Porto Alegre 2004. Pp. 269-87.
[7]
Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004; 20(5): 449-56.
[http://dx.doi.org/10.1016/j.dental.2003.05.002 ] [PMID: 15081551]
[8]
Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999; 20(1): 1-25.
[http://dx.doi.org/10.1016/S0142-9612(98)00010-6 ] [PMID: 9916767]
[9]
Schmitt J, Wichmann M, Holst S, Reich S. Restoring severely compromised anterior teeth with zirconia crowns and feather-edged margin preparations: a 3-year follow-up of a prospective clinical trial. Int J Prosthodont 2010; 23(2): 107-9.
[PMID: 20305846]
[10]
Özcan M, Vallittu PK. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 2003; 19(8): 725-31.
[http://dx.doi.org/10.1016/S0109-5641(03)00019-8 ] [PMID: 14511730]
[11]
Sundfeld Neto D, Naves LZ, Costa AR, et al. The effect of hydrofluoric acid concentration on the bond strength and morphology of the surface and interface of glass ceramics to a resin cement. Oper Dent 2015; 40(5): 470-9.
[http://dx.doi.org/10.2341/14-133-L ] [PMID: 25764043]
[12]
Della Bona A, Kochenborger R, Di Guida LA. Bond strength of ceramic and metal orthodontic brackets to aged resin-based composite restorations. Curr Dent 2019; 1(1): 40-5.
[http://dx.doi.org/10.2174/2542579X01666180919121640]
[13]
Cavalcanti AN, Foxton RM, Watson TF, Oliveira MT, Giannini M, Marchi GM. Bond strength of resin cements to a zirconia ceramic with different surface treatments. Oper Dent 2009; 34(3): 280-7.
[http://dx.doi.org/10.2341/08-80 ] [PMID: 19544816]
[14]
de Castro HL, Corazza PH, Paes-Júnior Tde A, Della Bona A. Influence of Y-TZP ceramic treatment and different resin cements on bond strength to dentin. Dent Mater 2012; 28(11): 1191-7.
[http://dx.doi.org/10.1016/j.dental.2012.09.003 ] [PMID: 22999373]
[15]
Della Bona A, Anusavice KJ, Shen C. Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2000; 2(4): 305-13.
[PMID: 11317377]
[16]
Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 1998; 14(1): 64-71.
[http://dx.doi.org/10.1016/S0109-5641(98)00011-6 ] [PMID: 9972153]
[17]
Pozzobon JL, Pereira GKR, Wandscher VF, Dorneles LS, Valandro LF. Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystalline ceramic after different zirconia surface treatments. Mater Sci Eng C 2017; 77: 828-35.
[http://dx.doi.org/10.1016/j.msec.2017.03.299 ] [PMID: 28532098]
[18]
Queiroz JR, Benetti P, Massi M, Junior LN, Della Bona A. Effect of multiple firing and silica deposition on the zirconia-porcelain interfacial bond strength. Dent Mater 2012; 28(7): 763-8.
[http://dx.doi.org/10.1016/j.dental.2012.03.014 ] [PMID: 22520227]
[19]
Della Bona A, Borba M, Benetti P, et al. Adhesion to dental ceramics. Curr Oral Health Rep 2014; 1(4): 232-8.
[http://dx.doi.org/10.1007/s40496-014-0030-y]
[20]
Della Bona A. Important aspects of bonding resin to dental ceramics. J Adhes Sci Technol 2009; 23: 1163-76.
[http://dx.doi.org/10.1163/156856109X440146]
[21]
Della Bona A, Donassollo TA, Demarco FF, Barrett AA, Mecholsky JJ Jr. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic. Dent Mater 2007; 23(6): 769-75.
[http://dx.doi.org/10.1016/j.dental.2006.06.043 ] [PMID: 17112579]
[22]
Della Bona A, Anusavice KJ, Hood JA. Effect of ceramic surface treatment on tensile bond strength to a resin cement. Int J Prosthodont 2002; 15(3): 248-53.
[PMID: 12066487]
[23]
Della Bona A, Anusavice KJ, Mecholsky JJ Jr. Apparent interfacial fracture toughness of resin/ceramic systems. J Dent Res 2006; 85(11): 1037-41.
[http://dx.doi.org/10.1177/154405910608501112 ] [PMID: 17062746]
[24]
Lung CY, Matinlinna JP. Aspects of silane coupling agents and surface conditioning in dentistry: an overview. Dent Mater 2012; 28(5): 467-77.
[http://dx.doi.org/10.1016/j.dental.2012.02.009 ] [PMID: 22425571]
[25]
Soon G, Pingguan-Murphy B, Lai KW, Akbar SA. Review of zirconia-based bioceramic: Surface modification and cellular response. Ceram Int 2016; 42(11): 12543-55.
[http://dx.doi.org/10.1016/j.ceramint.2016.05.077]
[26]
Bona AD, Pecho OE, Alessandretti R. Zirconia as a Dental Biomaterial. Materials (Basel) 2015; 8(8): 4978-91.
[http://dx.doi.org/10.3390/ma8084978 ] [PMID: 28793485]
[27]
Tian T, Tsoi JK, Matinlinna JP, Burrow MF. Aspects of bonding between resin luting cements and glass ceramic materials. Dent Mater 2014; 30(7): e147-62.
[http://dx.doi.org/10.1016/j.dental.2014.01.017 ] [PMID: 24612840]
[28]
El-Shrkawy ZR, El-Hosary MM, Saleh O, Mandour MH. Effect of different surface treatments on bond strength, surface and microscopic structure of zirconia ceramic. Fut Dent J 2016; 2(1): 41-53.
[http://dx.doi.org/10.1016/j.fdj.2016.04.005]
[29]
Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003; 89(3): 268-74.
[http://dx.doi.org/10.1067/mpr.2003.50 ] [PMID: 12644802]
[30]
Tsukakoshi M, Shinya A, Gomi H, Lassila LV, Vallittu PK, Shinya A. Effects of dental adhesive cement and surface treatment on bond strength and leakage of zirconium oxide ceramics. Dent Mater J 2008; 27(2): 159-71.
[http://dx.doi.org/10.4012/dmj.27.159 ] [PMID: 18540388]
[31]
Evans LS, McGrory KR, English JD, et al. A comparison of shear bond strengths among different self-etching primers. Tex Dent J 2009; 126(4): 312-9.
[PMID: 19472550]
[32]
Özcan M. The use of chairside silica coating for different dental applications: a clinical report. J Prosthet Dent 2002; 87(5): 469-72.
[http://dx.doi.org/10.1067/mpr.2002.124365 ] [PMID: 12070506]
[33]
Valandro LF, Della Bona A, Antonio Bottino M, Neisser MP. The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic. J Prosthet Dent 2005; 93(3): 253-9.
[http://dx.doi.org/10.1016/j.prosdent.2004.12.002 ] [PMID: 15775926]
[34]
Schubert H, Frey F. Stability of Y-TZP during hydrothermal treatment: Neutron experiments and stability considerations. J Eur Ceram Soc 2005; 25(9): 1597-602.
[http://dx.doi.org/10.1016/j.jeurceramsoc.2004.03.025]
[35]
Shimizu K, Oka M, Kumar P, et al. Time-dependent changes in the mechanical properties of zirconia ceramic. J Biomed Mater Res 1993; 27(6): 729-34.
[http://dx.doi.org/10.1002/jbm.820270605 ] [PMID: 8408102]
[36]
Zhang Y, Pajares A, Lawn BR. Fatigue and damage tolerance of Y-TZP ceramics in layered biomechanical systems. J Biomed Mater Res B Appl Biomater 2004; 71(1): 166-71.
[PMID: 15368241]
[37]
Aurélio IL, Marchionatti AM, Montagner AF, May LG, Soares FZ. Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis. Dent Mater 2016; 32(6): 827-45.
[http://dx.doi.org/10.1016/j.dental.2016.03.021 ] [PMID: 27083253]
[38]
Wang H, Aboushelib MN, Feilzer AJ. Strength influencing variables on CAD/CAM zirconia frameworks. Dent Mater 2008; 24(5): 633-8.
[http://dx.doi.org/10.1016/j.dental.2007.06.030 ] [PMID: 17765301]
[39]
Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999; 15(6): 426-33.
[http://dx.doi.org/10.1016/S0109-5641(99)00070-6 ] [PMID: 10863444]
[40]
Srikanth R, Kosmac T, Della Bona A, Yin L, Zhang Y. Effects of cementation surface modifications on fracture resistance of zirconia. Dent Mater 2015; 31(4): 435-42.
[http://dx.doi.org/10.1016/j.dental.2015.01.013 ] [PMID: 25687628]
[41]
Chevalier J, Olagnon C, Fantozzi G. Crack propagation and fatigue in zirconia-based composites. Compos, Part A Appl Sci Manuf 1999; 30(4): 525-30.
[http://dx.doi.org/10.1016/S1359-835X(98)00145-6]
[42]
Curtis AR, Wright AJ, Fleming GJP. The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. J Dent 2006; 34(3): 195-206.
[http://dx.doi.org/10.1016/j.jdent.2005.06.006 ] [PMID: 16112791]
[43]
Tzanakakis EG, Tzoutzas IG, Koidis PT. Is there a potential for durable adhesion to zirconia restorations? A systematic review. J Prosthet Dent 2016; 115(1): 9-19.
[http://dx.doi.org/10.1016/j.prosdent.2015.09.008 ] [PMID: 26548872]
[44]
Blatz MB, Phark JH, Ozer F, et al. In vitro comparative bond strength of contemporary self-adhesive resin cements to zirconium oxide ceramic with and without air-particle abrasion. Clin Oral Investig 2010; 14(2): 187-92.
[http://dx.doi.org/10.1007/s00784-009-0278-0 ] [PMID: 19415350]
[45]
Nothdurft FP, Motter PJ, Pospiech PR. Effect of surface treatment on the initial bond strength of different luting cements to zirconium oxide ceramic. Clin Oral Investig 2009; 13(2): 229-35.
[http://dx.doi.org/10.1007/s00784-008-0222-8 ] [PMID: 18758827]
[46]
Kitayama S, Nikaido T, Takahashi R, et al. Effect of primer treatment on bonding of resin cements to zirconia ceramic. Dent Mater 2010; 26(5): 426-32.
[http://dx.doi.org/10.1016/j.dental.2009.11.159 ] [PMID: 20102781]
[47]
Attia A, Lehmann F, Kern M. Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramic. Dent Mater 2011; 27(3): 207-13.
[http://dx.doi.org/10.1016/j.dental.2010.10.004 ] [PMID: 21071072]
[48]
Tsuo Y, Yoshida K, Atsuta M. Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics. Dent Mater J 2006; 25(4): 669-74.
[http://dx.doi.org/10.4012/dmj.25.669 ] [PMID: 17338299]
[49]
Borges GA, Sophr AM, de Goes MF, Sobrinho LC, Chan DC. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent 2003; 89(5): 479-88.
[http://dx.doi.org/10.1016/S0022-3913(02)52704-9 ] [PMID: 12806326]
[50]
Ozcan M, Nijhuis H, Valandro LF. Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater J 2008; 27(1): 99-104.
[http://dx.doi.org/10.4012/dmj.27.99 ] [PMID: 18309618]
[51]
Osorio R, Castillo-de Oyagüe R, Monticelli F, Osorio E, Toledano M. Resistance to bond degradation between dual-cure resin cements and pre-treated sintered CAD-CAM dental ceramics. Med Oral Patol Oral Cir Bucal 2012; 17(4): e669-77.
[http://dx.doi.org/10.4317/medoral.17828 ] [PMID: 22322517]
[52]
Wolfart M, Lehmann F, Wolfart S, Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 2007; 23(1): 45-50.
[http://dx.doi.org/10.1016/j.dental.2005.11.040 ] [PMID: 16427692]
[53]
Xie ZG, Meng XF, Xu LN, Yoshida K, Luo XP, Gu N. Effect of air abrasion and dye on the surface element ratio and resin bond of zirconia ceramic. Biomed Mater 2011; 6(6)065004
[http://dx.doi.org/10.1088/1748-6041/6/6/065004 ] [PMID: 22002676]
[54]
Cavalcanti AN, Foxton RM, Watson TF, Oliveira MT, Giannini M, Marchi GM. Y-TZP ceramics: key concepts for clinical application. Oper Dent 2009; 34(3): 344-51.
[http://dx.doi.org/10.2341/08-79 ] [PMID: 19544825]
[55]
Kern M. Bonding to oxide ceramics—laboratory testing versus clinical outcome. Dent Mater 2015; 31(1): 8-14.
[http://dx.doi.org/10.1016/j.dental.2014.06.007 ] [PMID: 25059831]
[56]
Qeblawi DM, Muñoz CA, Brewer JD, Monaco EA Jr. The effect of zirconia surface treatment on flexural strength and shear bond strength to a resin cement. J Prosthet Dent 2010; 103(4): 210-20.
[http://dx.doi.org/10.1016/S0022-3913(10)60033-9 ] [PMID: 20362764]
[57]
Akgungor G, Sen D, Aydin M. Influence of different surface treatments on the short-term bond strength and durability between a zirconia post and a composite resin core material. J Prosthet Dent 2008; 99(5): 388-99.
[http://dx.doi.org/10.1016/S0022-3913(08)60088-8 ] [PMID: 18456050]
[58]
Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010; 26(1): 44-50.
[http://dx.doi.org/10.1016/j.dental.2009.08.008 ] [PMID: 19766300]
[59]
de Castro HL, Passos SP, Zogheib LV, Bona AD. Effect of cement shade and light-curing unit on bond strength of a ceramic cemented to dentin. J Adhes Dent 2012; 14(2): 155-60.
[PMID: 22282756]
[60]
Perdigão J, Fernandes SD, Pinto AM, Oliveira FA. Effect of artificial aging and surface treatment on bond strengths to dental zirconia. Oper Dent 2013; 38(2): 168-76.
[http://dx.doi.org/10.2341/11-489-L ] [PMID: 22788723]
[61]
Zakavi F, Mombeini M, Dibazar S, Gholizadeh S. Evaluation of shear bond strength of zirconia to composite resin using different adhesive systems. J Clin Exp Dent 2019; 11(3): e257-63.
[http://dx.doi.org/10.4317/jced.55428 ] [PMID: 31001396]
[62]
Kern M, Barloi A, Yang B. Surface conditioning influences zirconia ceramic bonding. J Dent Res 2009; 88(9): 817-22.
[http://dx.doi.org/10.1177/0022034509340881 ] [PMID: 19767578]
[63]
Attia A, Kern M. Long-term resin bonding to zirconia ceramic with a new universal primer. J Prosthet Dent 2011; 106(5): 319-27.
[http://dx.doi.org/10.1016/S0022-3913(11)60137-6 ] [PMID: 22024182]
[64]
Blatz MB, Sadan A, Martin J, Lang B. In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling. J Prosthet Dent 2004; 91(4): 356-62.
[http://dx.doi.org/10.1016/j.prosdent.2004.02.001 ] [PMID: 15116037]
[65]
Blatz MB, Chiche G, Holst S, Sadan A. Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int 2007; 38(9): 745-53.
[PMID: 17873981]
[66]
Chaiyabutr Y, McGowan S, Phillips KM, Kois JC, Giordano RA. The effect of hydrofluoric acid surface treatment and bond strength of a zirconia veneering ceramic. J Prosthet Dent 2008; 100(3): 194-202.
[http://dx.doi.org/10.1016/S0022-3913(08)60178-X ] [PMID: 18762031]
[67]
Hegde VS, Khatavkar RA. A new dimension to conservative dentistry: Air abrasion. J Conserv Dent 2010; 13(1): 4-8.
[http://dx.doi.org/10.4103/0972-0707.62632 ] [PMID: 20582212]
[68]
Fischer J, Grohmann P, Stawarczyk B. Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites. Dent Mater J 2008; 27(3): 448-54.
[http://dx.doi.org/10.4012/dmj.27.448 ] [PMID: 18717175]
[69]
Tanaka R, Fujishima A, Shibata Y, Manabe A, Miyazaki T. Cooperation of phosphate monomer and silica modification on zirconia. J Dent Res 2008; 87(7): 666-70.
[http://dx.doi.org/10.1177/154405910808700705 ] [PMID: 18573988]
[70]
Chen L, Suh BIN, Kim J, Tay FR. Evaluation of silica-coating techniques for zirconia bonding. Am J Dent 2011; 24(2): 79-84.
[PMID: 21698986]
[71]
Della Bona A, Anusavice KJ. Microstructure, composition, and etching topography of dental ceramics. Int J Prosthodont 2002; 15(2): 159-67.
[PMID: 11951806]
[72]
Casucci A, Osorio E, Osorio R, et al. Influence of different surface treatments on surface zirconia frameworks. J Dent 2009; 37(11): 891-7.
[http://dx.doi.org/10.1016/j.jdent.2009.06.013 ] [PMID: 19616882]
[73]
Oliveira-Ogliari A, Vasconcelos CS, Bruschi RC, Gonçalves AP, Ogliari FA, Moraes RR. Thermal silicatization: A new approach for bonding to zirconia ceramics. Int J Adhes 2014; 48: 164-7.
[http://dx.doi.org/10.1016/j.ijadhadh.2013.09.048]
[74]
Piascik JR, Wolter SD, Stoner BR. Development of a novel surface modification for improved bonding to zirconia. Dent Mater 2011; 27(5): e99-e105.
[http://dx.doi.org/10.1016/j.dental.2011.01.005 ] [PMID: 21353693]
[75]
Chai J, Chu FCS, Chow TW. Effect of surface treatment on shear bond strength of zirconia to human dentin. J Prosthodont 2011; 20(3): 173-9.
[http://dx.doi.org/10.1111/j.1532-849X.2011.00695.x ] [PMID: 21463380]

Rights & Permissions Print Cite
Article Metrics
60
© 2024 Bentham Science Publishers | Privacy Policy