Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Research Article

A Pneumatic Artificial Muscle Bionic Kangaroo Leg Suspension

Author(s): Yong Song, Shichuang Liu*, Jiangxuan Che, Jinyi Lian, Zhanlong Li and Qinglu Shi

Volume 12, Issue 4, 2019

Page: [357 - 366] Pages: 10

DOI: 10.2174/2212797612666190808100422

Price: $65

Abstract

Background: Vehicles generally travel on different road conditions, and withstand strong shock and vibration. In order to reduce or isolate the strong shock and vibration, it is necessary to propose and develop a high-performance vehicle suspension system.

Objective: This study aims to report a pneumatic artificial muscle bionic kangaroo leg suspension to improve the comfort performance of vehicle suspension system.

Methods: In summarizing the existing vehicle suspension systems and analyzing their advantages and disadvantages, this paper introduces a new patent of vehicle suspension system based on the excellent damping and buffering performance of kangaroo leg, A Pneumatic Artificial Muscle Bionic Kangaroo Leg Suspension. According to the biomimetic principle, the pneumatic artificial muscles bionic kangaroo leg suspension with equal bone ratio is constructed on the basis of the kangaroo leg crural index, and two working modes (passive and active modes) are designed for the suspension. Moreover, the working principle of the suspension system is introduced, and the rod system equations for the suspension structure are built up. The characteristic simulation model of this bionic suspension is established in Adams, and the vertical performance is analysed.

Results: It is found that the largest deformation happens in the bionic heel spring and the largest angle change occurs in the bionic ankle joint under impulse road excitation, which is similar to the dynamic characteristics of kangaroo leg. Furthermore, the dynamic displacement and the acceleration of the vehicle body are both sharply reduced.

Conclusion: The simulation results show that the comfort performance of this bionic suspension is excellent under the impulse road excitation, which indicates the bionic suspension structure is feasible and reasonable to be applied to vehicle suspensions.

Keywords: Biomimetics, characteristic simulation, kangaroo leg structure, PAM, suspension, vehicle.

[1]
Syed MHR, Muhammad A, Abdul QK, Shaban GS, Jibran L. H∞ control of 8 degrees of freedom vehicle active suspension system. JKSUES 2018; 30: 161-9.
[http://dx.doi.org/10.1016/j.jksues.2016.02.004]
[2]
Geweda AE, El-Gohary MA, El-Nabawy AM, Awad T. Improvement of vehicle ride comfort using genetic algorithm optimization and PI controller. Alexandria Eng J 2017; 56(4): 405-14.
[http://dx.doi.org/10.1016/j.aej.2017.05.014]
[3]
Sebastian K, Marek P. Fuzzy control for semi-active vehicle suspension. J Low Freq Noise VA 2014; 3: 217-25.
[http://dx.doi.org/10.1260/0263-0923.32.3.217]
[4]
Tseng HE, Hrovat D. State of the art survey: Active and semi-active suspension control. Vehicle Syst Dyn 2015; 53(7): 1034-62.
[http://dx.doi.org/10.1080/00423114.2015.1037313]
[5]
Kherbert S, Georg M. Heavy trailer with independent McPherson wheel suspension RU2623366. (2017).
[6]
Zhang XM, Wang F, Wei WJ, et al. McPherson suspension overhead support with dual-channel force transferring function CN105711369. (2018).
[7]
Jo BM. Suspension shock absorber of McPherson strut type having reservoir capable of fine control of dumping force KR1020120108503. (2012).
[8]
Go SG. Inner tube for shock absorber KR101650282. (2016).
[9]
Leveque B, Skalli K. Equipment support element of a pneumatic suspension of a vehicle FR3058094. (2018).
[10]
Kawai Y, Ito T, Kobayashi K. Dryer device and air suspension system WO2018074107. (2018).
[11]
Lv YF, Xu S, Song HC. Variable-damping electromagnetic suspension rod assembly and washing machine WO2017177917. (2017).
[12]
Zhang JQ, Wang XY, Sun YQ, et al. Ball screw type electromagnetism suspension device CN206733991. (2017).
[13]
Srivastava SK, Yadav VG. Bionic manufacturing: Towards cyborg cells and sentient microbots. Trends Biotechnol 2018; 36(5): 483-7.
[http://dx.doi.org/10.1016/j.tibtech.2017.11.002]
[14]
Tillmann W, Stangier D, Lopes-Dias NF, Dirk B, Eugen K. Adjustment of friction by duplex-treated, bionic structures for sheet-bulk metal forming. Tribol Int 2017; 111: 9-17.
[http://dx.doi.org/10.1016/j.triboint.2017.02.037]
[15]
Escobar F, Díaz S, Gutiérrez C, Lemus R. Simulation of control of a sacra robot actuated by pneumatic artificial muscles using RNAPM. J Appl Res Technol 2014; 12: 939-46.
[http://dx.doi.org/10.1016/S1665-6423(14)70600-5]
[16]
Jonathon POG, Brian DK. Adjustable vehicle suspension system US2018354336. (2018).
[17]
Laurence JH, Damian OF. Dual rate vehicle suspension system US2019009632. (2019).
[18]
Charles DN, Martin H, Daniel L. Rear suspension assembly for an off-road vehicle US20180236834. (2018).
[19]
Hellholm B, Nordberg B. Suspension device for tracked vehicle US10144460. (2018).
[20]
Wu J. Vehicle suspension adjustment method and system, and adjustable suspended vehicle WO2019061502. (2019).
[21]
Alessandro B, Francesco P, William CJ. Suspension system for a work vehicle US2019100255. (2019).
[22]
Matthieu A. Cycle-type vehicle suspension provided with a resilient element for making it possible to obtain an optimal static compression curve, and optimized resilient element for such suspension US2019084642. (2019).
[23]
Carlo P, Andrea C, Sara DL, Silvano S. Oscillating arm of a motor-vehicle suspension US2019077206. (2019).
[24]
Robert PM, Christopher AS, Michael EM. Vehicle suspension structure with tuned vibration absorber US2019152284. (2019).
[25]
Peter WMF. Semi-trailing arm suspension for a motor vehicle US2019135065. (2019).
[26]
Joakim W, Kjell S, Ake M. System for wheel suspension of a vehicle US2019135063. (2019).
[27]
Vladimir S, Avshalom S, Klaus T. Non-linear stiffness actuator for vehicle suspension US2019118604. (2019).
[28]
Jeong SH, Min KH. Active suspension system for vehicle KR101971534. (2019).
[29]
Hu HW, Kim H, Lim KB, Ryu JH, Hwang SW. Suspension apparatus for vehicle seat KR101999725. (2019).
[30]
Kim SS, Byung-Gu BG, Choi MG, Park DH. The plastic reinforcing member inserted into the inside of the spring pad KR101887391. (2018).
[31]
Aleksey G. All-terrain vehicle and suspension for an all-terrain vehicle PL3031635. (2019).
[32]
Min KH. Active suspension system for vehicle KR101937473. (2019).
[33]
Ji YH. Regenerative suspension for vehicle KR101965243. (2019).
[34]
Vargas Martínez HS, Barragán G, Efrain J. Mechanical structure for assistance robot MX2017008476. (2019).
[35]
Woo HS, Na BH, Kong KC, Kim HB. Joint actuator, and joint structure of leg-supporting robot comprising same US2018079084. (2018).
[36]
Knut G, Sebastian H, Alexander H, Elias K. Model-based analysis and motion planning for the bionic kangaroo. Automat Technol 2015; 63(8): 606-20.
[http://dx.doi.org/10.1515/auto-2015-0010]
[37]
Nguyen QV, Park HC. Design and demonstration of a locust-like jumping mechanism for small-scale robots. J Bionics Eng 2012; 9(3): 271-81.
[http://dx.doi.org/10.1016/S1672-6529(11)60121-2]
[38]
[39]
Knut G, Sebastian H, Alexander H, Nadine K, Nina G, Elias K. Control design for a bionic kangaroo. Control Eng Pract 2015; 42: 106-17.
[http://dx.doi.org/10.1016/j.conengprac.2015.05.005]
[40]
Fan CQ, Dong HJ, Ge WJ. Dynamic analysis and kinetic simulation for one leg of hydraulically actuated bionic kangaroo-hopping robot. Mach Des Manuf 2012; 5: 177-9.
[http://dx.doi.org/10.19356/j.cnki.1001-3997.2012.05.065]
[41]
Dolan P, Neal JR, Sabgash TD, et al. Double wishbone independent trailer suspension WO2018039106 (2018), EP3500443 (2019) & US20190168558 (2019)..
[42]
Suzuki H, Funano T. Double wishbone type suspension device US20170267053. (2017).
[43]
Meng DJ, Wang XJ, Zhang LJ, et al. Drive-by-wire four-wheel independent steering system with the steering motor arranged on double-wishbone suspension swinging arm CN106627746. (2017).
[44]
Weng SF, Wu WJ. Last swing arm structure of double-wishbone independent suspension CN205651912. (2016).
[45]
Kim BM, Ancient S, Kim JM. Geometric independent variable type double wishbone suspension system KR1020160056394. (2016).
[46]
Piasco F, Architetto L. Double wishbone or McPherson suspension with transverse leaf spring and dimensioning method thereof WO2015151064 (2015), CN106457946 (2017) & EP3126165 (2017).
[47]
Kim BM, Ancient S, Jung-geun J. Structure of subframe for vehicle KR1020130064981. (2013).
[48]
Zuge F, Glas A, Langhoff HJ, Bschierl C. Wheel suspension for motor vehicles US20150151597. (2015).
[49]
Liang RC, Xu DS, Dou DH, Ren X, Ji HL. Mcpherson independent suspension assembly CN206884629. (2018).
[50]
Wang M, Beeh E. Twist-beam rear suspension with brace structure between the trailing arms WO2017148692. (2017).
[51]
Bäumer B, Heidsieck K. Steerable twist-beam rear suspension WO2017137186. (2017).
[52]
Gao YS, Zhang W, Lu RD, Jiang HM, Chen XP. Variable thickness automobile torsion beam CN206357951. (2017).
[53]
Nishimura K, Jobira M, Takahashi H, Kawaguchi H, Nakado N, Kuwako S. Vehicle torsion beam suspension and vehicle torsion beam US2019030978. (2019).
[54]
Kikuchi R, Narita A. Torsion beam type suspension structure and vehicle JP2019014318. (2019).
[55]
Wei BL, Ma LC, Pan JB, Li ZY, Lin ZH, Wu CD. Rear wheel support structure used for multi-link independent suspension CN106627012. (2017).
[56]
Qiu WJ, Qin JJ, Lu ZH, Hou YJ, Song SF. Horizontal shock attenuation arm independent suspension of multi-link CN205573522. (2016).
[57]
Yi JG, Wu HL, Kong DG, Yuan YW. Two agricultural electronic chassis of parallel four link mechanism independent suspension of turning round CN205469354. (2016).
[58]
Andreas S, Dominik M, Joachim S. Wheel suspension for a motor vehicle US14262107. (2014).
[59]
Bae K. Lower arm bush of a multi-link suspension capable of improving ride quality by securing the conical directional strength of a vehicle properly KR1020110014946. (2012).
[60]
Girelli Consolaro A, Zandbergen P, Mainz D, et al. Multi-link suspension for a motor vehicle US2019092113. (2019).
[61]
Toru U, Shuyuki I. Air suspension system JP6338995. (2018).
[62]
Iain R, Jocelyn M, Dominique F. An air suspension assembly EP3299193. (2018).
[63]
Iain R, Jocelyn M, Dominique F. Air suspension assembly US20180079274. (2018).
[64]
Tagesson K. Air suspension evacuation for improved braking performance WO2018041328. (2018).
[65]
Scott FR. Heavy-duty vehicle air-ride suspension US10286746. (2019).
[66]
Oishi M, Ohashi H, Tokumitsu J, Kanda R. Air suspension system US20170341480. (2017).
[67]
Korhonen D, Karlsson D, Hyttinen J, Kyllönen M. Air suspension device and a vehicle comprising such an air suspension device SE1750831 (2019) & SE541150 (2019).
[68]
Zhang HR. Hydro-pneumatic suspension cylinder with controllable stroke CN106704441. (2017).
[69]
Mao CN, Wang P, Feng W, Kong WK, Zhang XL. Lifting hydro-pneumatic suspension hydraulic system CN106567904. (2017).
[70]
Wu H, Yang B, Wan F, et al. Automobile great-load independent suspension CN106427445. (2017).
[71]
Zhang HR. Externally-controlled isolation type double airchamber hydro-pneumatic suspension cylinder CN106402243. (2017).
[72]
Zhang HR. Internally-controlled variable damping hydropneumatic suspension cylinder CN106402244. (2017).
[73]
Li XG, Song W, Long XW, et al. Hydro-pneumatic suspension system capable of realizing active volume control and vehicle CN106314061. (2018).
[74]
Timoney S, Anderson CJ. Hydro-pneumatic suspension system US13744721. (2013).
[75]
Zou XL, Zhou LY, Zhou JX. Hydro-pneumatic suspension system and wheeled vehicle with the system WO2012083663. (2012).
[76]
von Holst CA, Kremb M, Hegler T, Zatrieb J. Suspension system for a vehicle axle US20180134107. (2018).
[77]
Bruno W, Conti PA, Greco G. Hydraulic compression stop member for a hydraulic shock-absorber for a vehicle suspension with pressure relief device US10208830. (2019).
[78]
Fredriksson V. Hydraulic suspension system for a vehicle, a vehicle being provided with such a system and a method for damping an anti-roll function of a vehicle GB2555353. (2018).
[79]
Bissbort M, Mekkes J, Roberti D, Slawinski T. Hydraulic suspension for vehicle and multi-functional proportional control valve for the same US20180100520. (2018).
[80]
Bruno W, Conti PA, Greco G. Hydraulic shock-absorber for a vehicle suspension US20180058533. (2018).
[81]
Conti PA, Greco G, Nepote A, Inglese F, Milazzo M, Stefanini C. Regenerative hydraulic shock-absorber for vehicle suspension US10052926. (2018).
[82]
Kos D, Wong T, Belanger M. Hydraulic suspension system for a bed truck and method for control thereof US20170368900. (2017).
[83]
Allegre JM, Monteil C. Hydraulic suspension system of a vehicle wheel EP3251879. (2019).
[84]
Berlinger N, Cavarec A. Hydraulic suspension system for a vehicle WO2017168065. (2017).
[85]
Berlinger N, Groult A, Guingand F. Hydraulic suspension system for a vehicle WO2017162947. (2017).
[86]
Radrizzani F. Oil-hydraulic suspension for vehicles EP3216631. (2017).
[87]
Dillenbeck MW. Vehicle suspension system with multi-stage hydraulic cylinder assemblies and external spring packs US10214071. (2019).
[88]
Girotto A. Magnetic suspension for a vehicle US2019143840. (2019).
[89]
Zhou HW, Liu Z, Liu GH, Zhao WX, Ji JH, Chen L. Fault-tolerant permanent-magnet Vernier cylindrical electric motor with electromagnetic suspension and fault-tolerant vector control method for short circuit of two adjacent phases WO2018018671. (2018).
[90]
Xiao QJ, Kraff M, Wang Y, Liu YF, Ouyang SJ. Threedimensional electromagnetic suspension micro mirror CN206282031. (2017).
[91]
Vladimirovich MY. Electromagnetic suspension of vertical rotor shaft RU2626794. (2017).
[92]
Wang RC, Shao K, Meng XP, Sun ZY, Xie J, Chen L. Electromagnetic suspension system based on wheel rim driven electric vehicle and control method thereof CN106926660. (2017).
[93]
Xie P, Zhao GF, Ma YH, Guan QF, Ji RP. Electromagnetic suspension shock isolation device CN206279840. (2017).
[94]
Zhao GF, Ma YH, Xie P, Guan QF. Three-dimensional shock isolation device based on electromagnetic suspension CN106760843. (2017).

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy