Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Research Article

Vibration Transmission and Isolation in the Cutting Process of Machine Tools

Author(s): Keguo Zhang* and Xiaodong Xu

Volume 12, Issue 1, 2019

Page: [65 - 71] Pages: 7

DOI: 10.2174/2212797612666181213102904

Price: $65

Abstract

Background: Machining is an important method for manufacturing parts. It is characterized by high cutting speed with a considerable influence of high-frequency vibration. Various relevant papers and patents have studied vibration transmission and isolation in the machining process.

Objective: To investigate vibration transmission and isolation in the machining process, and simplify the cutting process of a machine tool.

Methods: Firstly single-layer and double-layer vibration isolation models are established, the substructure matrix analysis method is adopted and the vibration power flow transmission characteristics of double-layer vibration isolation system under complex excitation are analyzed. Secondly, the optimal control strategy based on the minimum power flow inputted into the base is proposed. Then the control effect of the active actuator under different installation modes is analysed and compared.

Results: It has been proved that low-frequency coupling is characterized by the rigid mode of the workpiece or the grinding wheel when cutting, whereas high-frequency coupling exhibits the dynamic characteristics of the machine tool bed. A good vibration isolation effect can be achieved for three types of installation modes in a double-layer vibration isolation system, and only the actuators installed between the vibration source and the middle mass exhibit the best control effect.

Conclusion: The vibration isolation model has been established and the optimal installation mode of the actuator in the double-layer vibration isolation system has been found. And the paper provides a reference for the study of vibration transmission, control of machine tools and the elimination of grinding chatter.

Keywords: Active control, control strategy, cutting, machine tool, power flow, vibration isolation.

[1]
Fuller CR, Elliott SJ, Nelson P. Active Control of Vibration in Structures. In: Fuller CR, Elliott SJ, Nelson PA, Eds. Active Control of Vibration. Academic Press - Elsevier. 1996; pp. 153-83.
[2]
Elliott SJ. Signal processing for active control. 1st ed. Academic Press - Elsevier: Cambridge, Massachusetts, USA, 2001.
[3]
Pan X, Yan T, Juniper R. Active control of low-frequency hull-radiated noise. J Sound Vibrat 2008; 313(1-2): 29-45.
[4]
Gardonio P, Elliott SJ, Pinnington RJ. Active isolation of structural vibration on a multiple-degree-of-freedom system, Part I: The dynamics of the system. Inorg Nucl Chem Lett 1997; 207(1): 61-93.
[5]
Gardonio P, Elliott SJ, Pinnington RJ. Active isolation of structural vibration on a multiple-degree-of-freedom system, Part II: Effectiveness of active control strategies. J Sound Vibrat 1997; 207(1): 95-121.
[6]
Beijen MA, Tjepkema D, Dijk JV. Two-sensor control in active vibration isolation using hard mounts. Control Eng Pract 2014; 26(1): 82-90.
[7]
Li Y, He L, Shuai C, Wang C. Improved hybrid isolator with maglev actuator integrated in air spring for active-passive isolation of ship machinery vibration. J Sound Vibrat 2017; 407: 226-39.
[8]
Sun X, Yang B. A new methodology for developing flexure-hinged displacement amplifiers with micro-vibration suppression for a giant magnetostrictive micro drive system. Sens Actuators A Phys 2017; 263: 30-43.
[9]
Sun X, Yang B, Zhao L. Optimal design and experimental analyses of a new micro-vibration control payload-platform. J Sound Vibrat 2016; 374: 43-60.
[10]
Chen X, Shen Z, He Q, Du Q, Liu X. Influence of uncertainty and excitation amplitude on the vibration characteristics of rubber isolators. J Sound Vibrat 2016; 377: 216-25.
[11]
Shahadat MMZ, Mizuno T, Ishino Y, Takasaki M. Active vibration isolation using negative stiffness and displacement cancellation controls: Comparison based on vibration isolation performance. Control Eng Pract 2015; 37: 55-66.
[12]
Shen Y, Peng H, Li X, Yang S. Analytically optimal parameters of dynamic vibration absorber with negative stiffness. Mech Syst Signal Process 2017; 85: 193-203.
[13]
Long X, Jiang H, Meng G. Active vibration control for peripheral milling processes. J Mater Process Technol 2013; 213(5): 660-70.
[14]
Carvalho HMBD, Gomes JDO, Schmidt MA, Brandao VLC. Vibration analysis and energy efficiency in interrupted face milling processes. Proc CIRP 2015. 245-50.
[15]
Kirkham EE. Machine tool vibration isolation system. US5538373 (1996).
[16]
Allgeyer TL, Kemp JJ, Leighty CA, Noe JJ. Disk drive mounting system for absorbing shock and vibration in a machining environment. US6822858 (2004).
[17]
Choy PK, Huang J, Xing X, Yung HY. Active vibration absorber. US9689453 (2017).
[18]
Okwudire CE, Lee J. Minimization of the residual vibrations of ultra-precision manufacturing machines via optimal placement of vibration isolators. Precis Eng 2013; 37(2): 425-32.
[19]
Niu J, Song K, Lim CW. On active vibration isolation of floating raft system. J Sound Vibrat 2005; 285(1-2): 391-406.
[20]
Choi YT, Wereley NM, Jeon YS. Semi-active vibration isolation using magnetorheological isolators. J Aircr 2005; 42(5): 1244-51.
[21]
Alujević N, Čakmak D, Wolf H, Jokić M. Passive and active vibration isolation systems using inerter. J Sound Vibrat 2018; 418: 163-83.
[22]
Wang X, Zhou J, Xu D, Ouyang H, Duan Y. Force transmissibility of a two-stage vibration isolation system with quasi-zero stiffness. Nonlinear Dyn 2017; 87(1): 633-46.
[23]
Zhou P, Du J, Lü Z. Simultaneous topology optimization of supporting structure and loci of isolators in an active vibration isolation system. Comput Struc 2018; 194: 74-85.
[24]
Hao Z, Cao Q, Wiercigroch M. Two-sided damping constraint control strategy for high-performance vibration isolation and end-stop impact protection. Nonlinear Dyn 2016; 6(4): 1-16.
[25]
Gao X, Chen Q, Liu X. Nonlinear dynamics and design for a class of piecewise smooth vibration isolation system. Nonlinear Dyn 2016; 84(3): 1715-26.
[26]
Luo Q, Li D, Jiang J. Analysis and optimization of microvibration isolation for multiple flywheel systems of spacecraft. AIAA J 2016; 54(5): 1-13.
[27]
Parks A, Bodnar A, Marchelek K, Chodzko M. Using of active clamping device for workpiece vibration suppression. J Vib Eng Technol 2015; 3(2): 161-7.
[28]
Nandi A, Neogy S, Bhaduri S. Performance analysis of a non-contact vibration damper made up of a piezoelectric stack and an electromagnet. J Vib Eng Technol 2015; 3(4): 401-18.
[29]
Lim CW. Active control of flexible vibration systems with inclined combined mounts. Adv Vib Eng 2011; 10(3): 239-49.
[30]
Zhang X, Li W. Research and applications of MR elastomers. Recent Pat Mech Eng 2008; 1(3): 161-6.
[31]
Zhao JX, Yu X, Chai K, Yang QC. Vibration isolation performance analysis of double layer vibration isolation system. Chin J Ship Res 2017; 12(6): 101-7.
[32]
Zhou H, Wang G, Zhang Y, Yang J, Zheng Z. Study of the influence of tire belt structure on vibration noise. Recent Pat Mech Eng 2017; 10(4): 270-8.
[33]
Guo C, Yang S, Yin Y, Bao J. Research status on frictional vibration and noise of mechanical brake. Recent Pat Mech Eng 2017; 10(1): 39-50.
[34]
Tan J, Lei W, Wen R, Zhao B, Yang Y. Active vibration isolation device based on electromagnetic and aerostatic floatation. US9145945 (2015).
[35]
Otto K, Maeurer M. Damping device for a spindle of a grinding machine and grinding machine comprising a damping device. US9694462 (2017).
[36]
Shibayama T, Mayama T, Ukaji T. Vibration isolation device, arithmetic apparatus, exposure apparatus, and device manufacturing method. US7686144 (2010).
[37]
Chen CC. Vibration absorption cutter holder. US10016817 (2018).
[38]
Yang Z, Bai Y, Chen X, Chen C, Li C. Composite frequencyadjustable shock absorber. US9746123 (2017).

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy