Abstract
Background: Waste management is an essential process for the progress of any nation. The exponential growth in the urbanization and industrialization has brought the waste management issue into prime focus. The practices adopted for waste management vary across the nations as well as regions and sectors. Solid waste management encompasses a number of activities ranging from waste collection to waste recycling and waste reuse. These activities can make use of the technology for enhancing the throughput at each level.
Objective: This paper provides a review of the activities involved and technology employed at each step of the solid waste management process.
Methods: A phase-wise discussion of the activities involved in solid waste management cycle is provided along with the current methods in practice for each activity. The paper further provides a technical review of technology used for improving the waste management scenario. A brief discussion of the methods for reducing waste generation and increasing reuse is also presented. Finally, the paper identifies a list of challenges related to the waste management process and provides suitable suggestions for addressing the identified challenges.
Conclusion: This work shall help the researchers to gain valuable insight into the challenges involved in solid waste management practices and would guide future research regarding the employment of technology for improving the efficiency of the overall waste management process.
Keywords: Waste management, zero-waste goal, solid waste management, total collected waste, global positioning system, waste vehicle.
Graphical Abstract
[1]
G. Martinho, A. Gomes, M. Ramos, P. Santos, G. Gonçalves, M. Fonseca, and A. Pires, "Solid waste prevention and management at green festivals: A case study of the Andanças Festival, Portugal", Waste Manag., vol. 71, pp. 10-18, 2018. [http://dx.doi.org/10.1016/j.wasman.2017.10.020]. [PMID: 29102358].
[2]
U. N. E. P., Taking the pulse of the planet: connecting science with policy. Available from:.http://www.unep.org/geas
[3]
D. Hoornweg, and P. Bhada-Tata, What a waste: a global review of solid waste management.Available from:, http://hdl.handle.net/ 10986/17388
[4]
A. Esakku, "Municipal solid waste management in Chennai city", In: Proceedings of Eleventh International Waste Management and Landfill SymposiumSardinia, Italy, . 2007
[5]
P. Agamuthu, and T. Masaru, Municipal solid waste management in Asia and the Pacific Islands: challenges and strategic solutions, Environmental Science., Springer: Singapore, 2014. [http://dx.doi.org/10.1007/978-981-4451-73-4]
[6]
A. Bhide, and B. Sundaresan, Solid waste management in developing countries, Solid waste management in developing countries., INSDC, 1983.
[7]
>Food Wastage in India, And What You Can Do about It. CSR Journal. Available from:, http://thecsrjournal.in/food-wastage-in-india-a-serious-concern [Accessed on January 2018].
[8]
M.K. Ghose, A.K. Dikshit, and S.K. Sharma, "A GIS based transportation model for solid waste disposal-a case study on Asansol municipality", Waste Manag., vol. 26, no. 11, pp. 1287-1293, 2006. [http://dx.doi.org/10.1016/j.wasman.2005.09.022]. [PMID: 16377168].
[9]
Status of Waste to Energy (WTE) – India, 2016. Available from:, http://yesinstitute.in/knowledgecontent/thought/statusofwte2016/ [Accessed on July 2017]
[10]
CPCB MSW Annual Report 2015-16. Available from:, http://cpcb.nic.in/ uploads/hwmd/MSW_AnnualReport_2015-16.pdf [Accessed on Aug. 2017].
[11]
M. Sharholy, K. Ahmad, G. Mahmood, and R.C. Trivedi, "Municipal solid waste management in Indian cities - A review", Waste Manag., vol. 28, no. 2, pp. 459-467, 2008. [http://dx.doi.org/10.1016/j.wasman.2007.02.008]. [PMID: 17433664].
[12]
S. Gupta, K. Mohan, R. Prasad, S. Gupta, and A. Kansal, "Solid waste management in India: options and opportunities", Resour. Conserv. Recycling, vol. 24, no. 2, pp. 137-154, 1998. [http://dx.doi.org/10.1016/S0921-3449(98)00033-0].
[13]
M.R. Ray, S. Roychoudhury, G. Mukherjee, S. Roy, and T. Lahiri, "Respiratory and general health impairments of workers employed in a municipal solid waste disposal at an open landfill site in Delhi", Int. J. Hyg. Environ. Health, vol. 208, no. 4, pp. 255-262, 2005. [http://dx.doi.org/10.1016/j.ijheh.2005.02.001]. [PMID: 16078639].
[14]
T. Samwine, P. Wu, L. Xu, Y. Shen, E. Appiah, and W. Yaoqi, "Challenges and prospects of solid waste management in Ghana", Intl. J. Environ. Monitoring Anal., vol. 5, no. 4, pp. 96-102, 2017. [http://dx.doi.org/10.11648/j.ijema.20170504.11].
[15]
H.W. Gottinger, Economic models and applications of solid waste management., Routledge Library Edition, 2018. [http://dx.doi.org/10.4324/9781351140881]
[16]
Greenwich, Royal Greenwich. Available from:, http://www. royalgreenwich. gov.uk/info/200084/recycling-rubbish-and-waste/ 1463/recycling-and-waste collections/2 [Accessed on Jan. 2018]
[17]
Green Revolution Bins. Available from:, https://greenrevolu-tionbins. wordpress.com/2013/08/06/colorcoded-dustbins-for-waste- segregation/ [Accessed on Aug. 2017].
[18]
MCG, Municipal Corporation of Gurgaon. Available from:, https://timesofindia.indiatimes.com/city/gurgaon/colour-coded-bins-for-easier-waste disposal/articleshow/56820803.cms [Accessed on Jan. 2017]
[19]
Bottle. Bill,, and Bottle. Bill Norway, 1993. Available from:, http://www. bottlebill.org/legislation/world/norway.htm [Accessed on Jan 2017]
[20]
R. Joshi, and S. Ahmed, "Status and challenges of municipal solid waste management in India: A review", Cogent Environ. Sci., vol. 2, no. 1, pp. 1-18, 2016. [http://dx.doi.org/10.1080/23311843.2016.1139434].
[21]
V. Yadav, A.K. Bhurjee, S. Karmakar, and A.K. Dikshit, "A facility location model for municipal solid waste management system under uncertain environment", Sci. Total Environ., vol. 603-604, pp. 760-771, 2017. [http://dx.doi.org/10.1016/j.scitotenv.2017.02.207]. [PMID: 28395953].
[22]
D. Khan, and S.R. Samadder, "Allocation of solid waste collection bins and route optimization using geographical information system: A case study of Dhanbad City, India", Waste Manag. Res., vol. 34, no. 7, pp. 666-676, 2016. [http://dx.doi.org/10.1177/0734242X16649679]. [PMID: 27207771].
[23]
B. Chowdhury, and M.U. Chowdhury, Rfid-based real-time smart waste management systemTelecommunication Networks and Applications Conference, ATNAC 2007, Christchurch, New Zealand, 2007, pp. 175-180. [http://dx.doi.org/10.1109/ATNAC.2007.4665232]
[24]
S. Greengard, "Tracking garbage", Commun. ACM, vol. 53, no. 3, pp. 19-20, 2010. [http://dx.doi.org/10.1145/1666420.1666429].
[25]
M. Faccio, A. Persona, and G. Zanin, "Waste collection multi objective model with real time traceability data", Waste Manag., vol. 31, no. 12, pp. 2391-2405, 2011. [http://dx.doi.org/10.1016/j.wasman.2011.07.005]. [PMID: 21821406].
[26]
J. Huang, T. Pretz, and Z. Bian, "Intelligent solid waste processing using optical sensor based sorting technology", In: 3rd International Congress on Image and Signal Processing (CISP), Yantai, China Vol. 4 2010, pp. 1657-1661. [http://dx.doi.org/10.1109/CISP.2010.5647729]
[27]
R. Vijay, A. Gautam, A. Kalamdhad, A. Gupta, and S. Devotta, "GIS-based locational analysis of collection bins in municipal solid waste management systems", J. Environ. Eng. Sci., vol. 7, no. 1, pp. 39-43, 2008. [http://dx.doi.org/10.1139/S07-033].
[28]
S.T. Wagland, F. Veltre, and P.J. Longhurst, "Development of an image-based analysis method to determine the physical composition of a mixed waste material", Waste Manag., vol. 32, no. 2, pp. 245-248, 2012. [http://dx.doi.org/10.1016/j.wasman.2011.09.019]. [PMID: 22019051].
[29]
M. Arebey, M.A. Hannan, R.A. Begum, and H. Basri, "Solid waste bin level detection using gray level co-occurrence matrix feature extraction approach", J. Environ. Manage., vol. 104, pp. 9-18, 2012. [http://dx.doi.org/10.1016/j.jenvman.2012.03.035]. [PMID: 22484654].
[30]
R. Cremiato, M.L. Mastellone, C. Tagliaferri, L. Zaccariello, and P. Lettieri, "Environmental impact of municipal solid waste management using Life Cycle Assessment: The effect of anaerobic digestion, materials recovery and secondary fuels production", Renew. Energy, vol. 124, pp. 180-188, 2018. [http://dx.doi.org/10.1016/j.renene.2017.06.033].
[31]
Waste Collection Vehicles, Available from:, http://www. directindustry.com/ industrial-manufacturer/waste-collection-vehicle-129718.html [Accessed on July 2017].
[32]
Yes recycling. Available from:, http://www.yesrecycling.co.za/ contactus johannesburg.html [Accessed on Jan 2017].
[33]
L.H. Son, "Optimizing municipal solid waste collection using chaotic particle swarm optimization in GIS based environments: A case study at Danang City, Vietnam", Expert Syst. Appl., vol. 41, no. 18, pp. 8062-8074, 2018. [http://dx.doi.org/10.1016/j.eswa.2014.07.020].
[34]
D.L. O’Connor, "Solid waste collection vehicle route optimization for the city of Redlands, California", M.S. thesis, University of Redlands, California, 2013.
[35]
A. Kallel, M.M. Serbaji, and M. Zairi, "Using GIS-based tools for the optimization of solid waste collection and transport: Case study of Sfax City, Tunisia", J. Eng. , vol. 2016, .Article ID 4596849 2016 [http://dx.doi.org/10.1155/2016/4596849].
[36]
A. Malakahmad, P.M. Bakri, M.R.M. Mokhtar, and N. Khalil, "Solid waste collection routes optimization via GIS techniques in Ipoh city, Malaysia", Procedia Eng., vol. 77, pp. 20-27, 2014. [http://dx.doi.org/10.1016/j.proeng.2014.07.023].
[37]
D. Khan, and S.R. Samadder, "Municipal Solid Waste Management using Geographical Information System aided methods: A mini review", Waste Manag. Res., vol. 32, no. 11, pp. 1049-1062, 2014. [http://dx.doi.org/10.1177/0734242X14554644]. [PMID: 25352293].
[38]
D. Scott, "A two-color near-infrared sensor for sorting recycled plastic waste", Meas. Sci. Technol., vol. 6, no. 2, pp. 156-159, 1995. [http://dx.doi.org/10.1088/0957-0233/6/2/004].
[39]
W. Van den Broek, D. Wienke, W. Melssen, R. Feldhoff, T. Huth-Fehre, T. Kantimm, and L. Buydens, "Application of a spectroscopic infrared focal plane array sensor for on-line identification of plastic waste", Appl. Spectrosc., vol. 51, no. 6, pp. 856-865, 1997. [http://dx.doi.org/10.1366/0003702971941142].
[40]
H. Li, Z. Chen, and C.T. Wong, "Barcode technology for an incentive reward program to reduce construction wastes", Comput. Aided Civ. Infrastruct. Eng., vol. 18, no. 4, pp. 313-324, 2003. [http://dx.doi.org/10.1111/1467-8667.00320].
[41]
D. Maruca, J. Leone, and N.E. Cronin, "Systems and methods for identifying banned waste in a municipal solid waste environment", US Patent 7,870,042. 2006
[42]
M. Ogawa, "Waste treatment information management system", US Patent App. . 10/501,086, January 2003.
[43]
S. Saar, M. Stutz, and V.M. Thomas, "Towards intelligent recycling: a proposal to link bar codes to recycling information", Resour. Conserv. Recycling, vol. 41, no. 1, pp. 15-22, 2004. [http://dx.doi.org/10.1016/j.resconrec.2003.08.006].
[44]
M. Stutz, V.M. Thomas, and S. Saar, Linking bar codes to recycling information for mobile phonesInternational Symposium on Electronics and the Environment, Scottsdale, AZ, USA 2004, pp. 313-316. [http://dx.doi.org/10.1109/ISEE.2004.1299736]
[45]
D. Friedlos, "Australian waste-collection businesses tag trash bins", RFID Journal. Available from:, http://www.rfidjournal.com/ article/view/5145 [Accessed on Jan 2017].
[46]
M.L. Ali, M. Alam, and M.A.N.R. Rahaman, "Rfid based e-monitoring system for municipal solid waste management", In: 7th International Conference on Electrical & Computer Engineering (ICECE), Dhaka, Bangladesh 2012, pp. 474-477. [http://dx.doi.org/10.1109/ICECE.2012.6471590]
[47]
M.G. Gnoni, G. Lettera, and A. Rollo, "A feasibility study of a rfid traceability system in municipal solid waste management", Int. J. Inf. Technol. Manag., vol. 12, no. 1-2, pp. 27-38, 2013. [http://dx.doi.org/10.1504/IJITM.2013.051632].
[48]
I. Nielsen, M. Lim, and P. Nielsen, "Optimizing supply chain waste management through the use of rfid technology", In: IEEE International Conference on RFID-Technology and Applications (RFID-TA), Guangzhou, China 2010, pp. 296-301. [http://dx.doi.org/10.1109/RFID-TA.2010.5529921]
[49]
Y. Glouche, and P. Couderc, "A smart waste management with self-describing objects", In: In the Second International Conference on Smart Systems, Devices and Technologies (SMART’13) Rome, Italy,, . 2013
[50]
L. Tralhao, J. Coutinho-Rodrigues, and L. Alcada-Almeida, "A multiobjective modeling approach to locate multi-compartment containers for urban-sorted waste", Waste management., vol. 30, no. 12, pp. 2418-2429, 2010. [http://dx.doi.org/10.1016/j.wasman.2010.06.017].
[51]
J. Senthil, S. Vadivel, and J. Murugesan, "Optimum location of dust bins using GEO-spatial technology: a case study of kumbakonam town, Tamil Nadu, India", Adv. Appl. Sci. Res., vol. 3, no. 5, pp. 2997-3003, 2012.
[52]
V. Catania, and D. Ventura, An approch for monitoring and smart planning of urban solid waste management using smart-m3 platformProceedings of 15th Conference of Open Innovations Association FRUCT, St. Petersburg, Russia 2014, pp. 24-31. [http://dx.doi.org/10.1109/FRUCT.2014.6872422]
[53]
F. Reverter, M. Gasulla, and R. Pallas-Areny, "Capacitive level sensing for solid-waste collection", In: Proceedings of IEEE Sensors, Toronto, Ont., Canada Vol. 1, pp. 7-11. 2003 [http://dx.doi.org/10.1109/ICSENS.2003.1278885]
[54]
M. Marques, P. Dep, and I. Porto, "Reliability of a line-of-view sensor for recycling point waste containers", ISWA/APESB2009 WorId Congress. 2009
[55]
M. Lewis, and T. Newell, Development of an automated color sorting system for recyclable glass containersNational Waste Processing Conference, vol. 15. 1992, pp. 197-197.
[56]
S. Serranti, G. Bonifazi, and R. Pohl, "Spectral cullet classification in the mid-infrared field for ceramic glass contaminants detection", Waste Manag. Res., vol. 24, no. 1, pp. 48-59, 2006. [http://dx.doi.org/10.1177/0734242X06061017]. [PMID: 16496870].
[57]
S. Longhi, D. Marzioni, E. Alidori, G. Di Buo, M. Prist, M. Grisostomi, and M. Pirro, Solid waste management architecture using wireless sensor network technology5th International Conference on New Technologies, Mobility and Security (NTMS), Istanbul, Turkey 2012, pp. 1-5. [http://dx.doi.org/10.1109/NTMS.2012.6208764]
[58]
I. Hong, S. Park, B. Lee, J. Lee, D. Jeong, and S. Park, "IoT-based smart garbage system for efficient food waste management", Scientific World J., vol. 2014, .Article ID 646953, 2014. [http://dx.doi.org/10.1155/2014/646953] [PMID: 25258730]
[59]
Q. Song, J. Li, and X. Zeng, "Minimizing the increasing solid waste through zero waste strategy", J. Clean. Prod., vol. 104, pp. 199-210, 2015. [http://dx.doi.org/10.1016/j.jclepro.2014.08.027].
[60]
J. Kytojoki, T. Nuortio, O. Braysy, and M. Gendreau, "An efficient variable neighborhood search heuristic for very large scale vehicle routing problems", Comput. Oper. Res., vol. 34, no. 9, pp. 2743-2757, 2007. [http://dx.doi.org/10.1016/j.cor.2005.10.010].
[61]
V. Maniezzo, “Algorithms for large directed carp instances: Urban Solid Waste collection operational support”, UBLCS Technical Report Series., University of Bologna: Bologna, Italy, 2004, pp. 1-27.
[62]
D.V. Tung, and A. Pinnoi, "Vehicle routing–scheduling for waste collection in Hanoi", Eur. J. Oper. Res., vol. 125, no. 3, pp. 449-468, 2000. [http://dx.doi.org/10.1016/S0377-2217(99)00408-7].
[63]
G. Huang, N. Sae-Lim, L. Liu, and Z. Chen, "An interval-parameter fuzzy-stochastic programming approach for municipal solid waste management and planning", Environ. Model. Assess., vol. 6, no. 4, pp. 271-283, 2001. [http://dx.doi.org/10.1023/A:1013394118863].
[64]
I. Maqsood, and G.H. Huang, "A two-stage interval-stochastic programming model for waste management under uncertainty", J. Air Waste Manag. Assoc., vol. 53, no. 5, pp. 540-552, 2003. [http://dx.doi.org/10.1080/10473289.2003.10466195]. [PMID: 12774987].
[65]
F. Wang, "Deterministic and stochastic simulations for solid waste collection systems–a swim approach", Environ. Model. Assess., vol. 6, no. 4, pp. 249-260, 2001. [http://dx.doi.org/10.1023/A:1013325717955].
[66]
C. Chalkias, and K. Lasaridi, "A GIS based model for the optimization of municipal solid waste collection: The case study of Nikea, Athens, Greece", Technology, vol. 1, pp. 11-15, 2009.
[67]
N.V. Karadimas, M. Kolokathi, G. Defteraiou, and V. Loumos, Municipal waste collection of large items optimized with ARC GIS network analystProceedings of 21st European Conference on Modelling and Simulation, Prague, Czech Republic 2007, pp. 4-9.
[68]
ESRI, Arcgis Network Analyst Users Guide,, "ArcView® GIS Ver.9.3", In: ESRI Inc.Redlands, California, USA-2009, . 2002
[69]
A. Mitchell, The ESRI guide to GIS analysis: geographic patterns & relationships., vol. 1. ESRI, Inc., 1999.
[70]
Z. Ismail, and S. Loh, "Ant colony optimization for solving solid waste collection scheduling problems", J. Math. Stat., vol. 5, no. 3, pp. 199-205, 2009. [http://dx.doi.org/10.3844/jmssp.2009.199.205].
[71]
M. Akhtar, M. Hannan, and H. Basri, Particle swarm optimization modeling for solid waste collection problem with constraints3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), Kuala Lumpur, Malaysia 2015, pp. 1-4. [http://dx.doi.org/10.1109/ICSIMA.2015.7559025]
[72]
N.V. Karadimas, K. Papatzelou, and V.G. Loumos, "Genetic algorithms for municipal solid waste collection and routing optimization", In: International Conference on Artificial Intelligence Applications and InnovationsIFIP, Springer, . 2007 [http://dx.doi.org/10.1007/978-0-387-74161-1_24]
[73]
H. Basaiaoclu, E. Celenk, M.A. Mariulo, and N. Usul, "Selection of waste disposal sites using GIS", J. Am. Water Resour. Assoc., vol. 33, no. 2, pp. 455-464, 1997. [http://dx.doi.org/10.1111/j.1752-1688.1997.tb03524.x].
[74]
R. Muttiah, B. Engel, and D. Jones, "Waste disposal site selection using GIS-based simulated annealing", Comput. Geosci., vol. 22, no. 9, pp. 1013-1017, 1996. [http://dx.doi.org/10.1016/S0098-3004(96)00039-8].
[75]
E. Sfakianaki, and G. Kasis, "Identification and evaluation of suitable locations for waste management sites", Intl. J. Decision Sci. Risk Manage., vol. 2, no. 1-2, pp. 66-84, 2010. [http://dx.doi.org/10.1504/IJDSRM.2010.034672].
[76]
S. Lotfi, K. Habibi, and M. Koohsari, "Integrating GIS and fuzzy logic for urban solid waste management (A case study of Sanandaj City, Iran)", Pak. J. Biol. Sci., vol. 10, no. 22, pp. 4000-4007, 2007. [PMID: 19090271].
[77]
S. Sener, E. Sener, and R. Karagüzel, "Solid waste disposal site selection with GIS and AHP methodology: a case study in Senirkent-Uluborlu (Isparta) Basin, Turkey", Environ. Monit. Assess., vol. 173, no. 1-4, pp. 533-554, 2011. [http://dx.doi.org/10.1007/s10661-010-1403-x]. [PMID: 20213053].
[78]
J. Jensen, and E. Christensen, "Solid and hazardous waste disposal site selection using digital geographic information system techniques", Sci. Total Environ., vol. 56, pp. 265-276, 1986. [http://dx.doi.org/10.1016/0048-9697(86)90331-1].
[79]
C. Adeofun, H. Achi, G. Ufoegbune, A. Gbadebo, and J. Oyedepo, Application of remote sensing and geographic information system for selecting dumpsites and transport routes in Abeokuta, Nigeria., The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences: Toronto, Canada, 2014.
[80]
J. Malinauskaite, H. Jouhara, D. Czajczynska, P. Stanchev, E. Katsou, P. Rostkowski, R.J. Thorne, J. Colon, S. Ponsa, and F. Al-Mansour, "Municipal solid waste management and waste-to-energy in the context of a circular economy and energy recycling in Europe", Energy, vol. 141, pp. 2013-2044, 2017. [http://dx.doi.org/10.1016/j.energy.2017.11.128].
[81]
F. Cucchiella, I. D’Adamo, and M. Gastaldi, "Biomethane: A renewable resource as vehicle fuel", Resources, vol. 6, no. 4, pp. 1-13, 2017. [http://dx.doi.org/10.3390/resources6040058].
[82]
" Geocycle, Available from:", http://www.geocycle.fr/ fileadmin/templates/GEOCYCLE-FR/doc/GEOCYLE-US-12pages-v2-17-10-16 [Accessed on Feb. 2018]
[83]
A. Coban, I.F. Ertis, and N.A. Cavdaroglu, "Municipal solid waste management via multi-criteria decision making methods: A case study in Istanbul, Turkey", J. Clean. Prod., vol. 180, pp. 159-167, 2018. [http://dx.doi.org/10.1016/j.jclepro.2018.01.130].
[84]
L. Sun, M. Fujii, T. Tasaki, H. Dong, and S. Ohnishi, "Improving waste to energy rate by promoting an integrated municipal solid-waste management system", Resour. Conserv. Recycling, vol. 136, pp. 289-296, 2018. [http://dx.doi.org/10.1016/j.resconrec.2018.05.005].
[85]
G. Tavares, Z. Zsigraiova, V. Semiao, and M.G. Carvalho, "Optimisation of MSW collection routes for minimum fuel consumption using 3D GIS modelling", Waste Manag., vol. 29, no. 3, pp. 1176-1185, 2009. [http://dx.doi.org/10.1016/j.wasman.2008.07.013]. [PMID: 18835768].
[86]
X. Fan, M. Zhu, X. Zhang, Q. He, and A. Rovetta, Solid waste collection optimization considering energy utilization for large city areaInternational Conference on Logistics Systems and Intelligent Management, Harbin, China Vol. 3, 2010, pp. 1905-1909. [http://dx.doi.org/10.1109/ICLSIM.2010.5461296]
[87]
O. Apaydin, and M. Gonullu, "Route optimization for solid waste collection: Trabzon (turkey) Case Study", Glob. NEST J., vol. 9, no. 1, pp. 6-11, 2007.
[88]
O.M. Johansson, "The effect of dynamic scheduling and routing in a solid waste management system", Waste Management., vol. 26, no. 8, pp. 875-885, 2006. [http://dx.doi.org/10.1016/j.wasman.2005.09.004].
[89]
F. McLeod, G. Erdogan, T. Cherrett, T. Bektas, N. Davies, C. Speed, J. Dickinson, and S. Norgate, "Dynamic collection scheduling using remote asset monitoring: Case study in the UK charity sector", Transp. Res. Rec., no. 2378, pp. 65-72, 2013. [http://dx.doi.org/10.3141/2378-07].
[90]
A. Rovetta, F. Xiumin, F. Vicentini, Z. Minghua, A. Giusti, and H. Qichang, "Early detection and evaluation of waste through sensorized containers for a collection monitoring application", Waste Manag., vol. 29, no. 12, pp. 2939-2949, 2009. [http://dx.doi.org/10.1016/j.wasman.2009.08.016]. [PMID: 19783420].
Related Journals
Related Books
IoT-enabled Sensor Networks: Architecture, Methodologies, Security, and Futuristic Applications
AIoT and Big Data Analytics for Smart Healthcare Applications
Research Trends in Artificial Intelligence: Internet of Things
Artificial Intelligence and Multimedia Data Engineering
Basics of Python Programming: A Quick Guide for Beginners
Blockchain Technology in Healthcare - Concepts, Methodologies, and Applications
Artificial Intelligence and Knowledge Processing: Methods and Applications
Handbook of Artificial Intelligence
Amazon Web Services: the Definitive Guide for Beginners and Advanced Users
The Role of AI in Enhancing IoT-Cloud Applications
Article Metrics
44
3