Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Research Article

Finite Element Simulation, Analysis and Research on the Influence of 3D Printing Parameters on Forming Precision

Author(s): Zhang Baoqing*, Mohammad Imran Farid, Yu Shuo, Cao Cong and Shaoze Zhang

Volume 13, Issue 4, 2019

Page: [448 - 454] Pages: 7

DOI: 10.2174/1872212112666181002101151

Price: $65

Abstract

Background: 3D printing technology is an emerging technology based on additive ideas. Desktop-level 3D printers molded by Fused Deposition Modeling (FDM) are widely used. However, their printing accuracy is relatively low accompanied by severe warpage, which limits its application scope and fields. Therefore, analysis of the cause of warpage in the printing process and optimization, has important practical significance for promoting the application of FDM printers.

Methods: The goal of this work is to improve the forming precision of 3D prints, through the finite element analysis software ANSYS, utilizing the life and death component innovation and coupling the temperature field and stress field of printing speed, one of the key factors affecting the forming precision. After the calculation and analysis, the following conclusions can be drawn: In testing with other conditions unchanged, when the printing speed is gradually increased, the accuracy of the print is improved first and then decreased. This method provides a new way to analyze the influence of other factors on the forming accuracy and also provides a new way to get the best print parameters under the combined action of many factors. We reviewed several patents related to 3D printing, its optimization, formulations, precision and accuracy in respective field.

Results: So, to achieve the best results, layer thickness has great influence on the molding precision. Finally, the results were obtained by finite element analysis, finding the best printing accuracy of the print parameters and verifying them by conducting actual printing.

Conclusion: The research shows that the thickness of the layer has the greatest influence on the printing accuracy in the process parameters studied.

Keywords: Fused deposition modeling, the birth-death element method, coupling analysis, finite element, 3D printing, parameters.

Graphical Abstract
[1]
X.H. Liu, M.J. Jiang, and H. Cao, "Machining process of silicon carbide parts", J. Changchun Uni. Sci. Technol, vol. 34, pp. 150-153, 2011.
[2]
Q. Li, and Q. Wang, "3D printing: A new learning technology", J. Distance Educ., vol. 4, pp. 29-35, 2013.
[3]
X. Yu, D. Lv, and M. Zhao, "Application prospect of 3D printing technology of aeroengine heat exchanger development", J. Aviation Manufacturing Technol, vol. 466, pp. 43-46, 2014.
[4]
J.Y. Wang, L. Chai, and L.B. Liu, "Progress in three-dimensional (3D) printing of artificial organs", J. Mecha. Eng, vol. 50, pp. 119-127, 2014.
[5]
L. Wang, A. Fang, and H. Shen, "The development frontier of 3D printing - The brain-like tissue printing", J. Mechan. Eng, vol. 54, pp. 197-204, 2018.
[6]
S.A. Khaled, J.C. Burley, M.R. Alexander, and C.J. Roberts, "Desktop 3D printing of controlled release pharmaceutical bilayer tablets", Int. J. Pharm., vol. 461, pp. 105-111, 2014.
[7]
J. Zhao, Research and prospects on application of 3d printing technology in automotive design., Taiyuan: Taiyuan University of Technology , 2014.
[8]
X.B. Zhou, and J.X. Ye, The application and development of 3d printing in automotive air conditioning J. Automotive Appl. Vol. 9 pp. 67-70, 2016., .
[9]
J.A Weisman, C. Nicholson, and D.Mills, Methods and devices for Three-Dimensional printing or additive manufacturing of bioactive medical devices .International application published under the patent cooperation treaty (PCT). PCT/US20 15/044467, 2016..
[10]
B.H. Lu, and D.C. Li, "Development of the additive manufacturing (3D Printing) technology", J. Machinery Manufact Automation, vol. 42, pp. 1-4, 2013.
[11]
Special. Report, A third industrial revolution J. The Economist, Vol. 4, pp. 3-12, 2012..
[12]
H. Lipson, and K. Melba, The new world of 3D printing J. America: John Wiley & Sons, May, 2013., .
[13]
L. Zhang, X.D. Zhang, and D.D. Guo, "Computational simulation of 3D printing process", J. Computational Simulation., vol. 31, pp. 226-300, 2014.
[14]
J.L. Gao, Numerical simulation of temperature field and stress field in FDM rapid prototyping machine., Harbin: Harbin Institute of Technology , 2014.
[15]
L.L. Yang, Z.D. Shan, and W.J. Rong, "Numerical simulation of thermal stress field in 3d printing technology based on metal fused and deposition", J. Foundry Techonol, vol. 37, pp. 753-758, 2016.
[16]
Y.J. Hu, Finite element analysis and application., Beijing: Tsinghua University Press, 2009.
[17]
Z.Z. Liu, and C. Yang, Adjusting and control method for 3D printing precise shape forming of instant recuperation meshed potato U.S. Patent 20180199615, 2018..

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy