Generic placeholder image

Nanoscience & Nanotechnology-Asia

Editor-in-Chief

ISSN (Print): 2210-6812
ISSN (Online): 2210-6820

Research Article

Photocatalytic Activity of the Modified Coupled Semiconductors and Its Relationship with Surface Properties

Author(s): Shahab Khameneh Asl*

Volume 9, Issue 3, 2019

Page: [337 - 343] Pages: 7

DOI: 10.2174/2210681208666180913132329

Price: $65

Abstract

Background: In photocatalysis and surface chemistry, charge trapping extends the lifetime of photogenerated electrons and holes and decreases their recombination rate. The stable surface of crystals with lowest energy is (110) for rutile and (101), (010) or (100) for anatase. When these surfaces are exposed to simple molecules such as water, oxygen or methane, different reactions can occur. In this paper, the activity and mechanism of dye adsorption were studied and demonstrated significant increase in the resulting photo-catalysis with optimizing surface properties for the first time.

Methods: Degussa P25 (Aldrich) was used a based materials. The mixtures of ethanol (C2H5OH) and triethanolamine (TEA, C6H15NO3) and 1 M HNO3 solution were prepared and applied to chemical etching of anatase/rutile mixture. The nano composites with (0.5 % Pt) prepared by wet impregnation methods used as photo catalysts in water splitting reaction. The metallurgical and photo catalytical properties were characterized with standard methods.

Results: The X-ray diffraction (XRD) Results of the samples were shown that the chemical process affected the phases and molar ratios. The photo-catalytic properties of these powders were measured with phase ratios, crystalline size, and reaction time as parameters. TEM images of powders chemically etched at different conditions are shown that the average surface area increased. The TiO2powders consist of spherical particles, that modified to cubic like structure with etching but core of the powders seems to have similar microstructures and shapes. The photo reactivity clearly shows that with adjusting phase ratios, the microstructure, surface and photo-catalytic activity of powders are adjusted.

Conclusion: In this study, new method to preparation of core shell structure of anatase and rutile with using of etching developed and photo-catalytic activity of anatase and rutile hetro structure has been investigated using two systems. The reaction rate was related to the surface area, phase's ratio, particle and pore size, adsorption mechanism of reactants, concentration of dye and catalyst. The surface reaction sites and photo reactivity are higher in composite powders with similar particle size and band gap. The concentration of reactants (dye or water, H2, O2) is important because they react in suitable surface sites. The suitable sites are determined by size of compounds and surface charges. Additional to the surface properties, effectively charge separation was increasing the photo reactivity of composites.

Keywords: Etching, TiO2, nanocomposite, core-shell, surface properties, photocatalysis.

Graphical Abstract
[1]
Hoffmann, M.R.; Martin, S.R.; Choi, W.; Bahnemannt, D.W.; Keck, W.M. Environmental applications of semiconductors. Chem. Rev., 1995, 95, 69.
[2]
Kudo, A. Development of photocatalyst materials for water splitting. Int. J. Hydrogen Energy, 2006, 31, 197.
[3]
Fujishima, A.; Zhang, X.; Tryk, D.A. TiO 2 photocatalysis and related surface phenomena. Surf. Sci. Reports., 2008, 63, 515.
[4]
Sivachidambaram, M.; Vijaya, J.J.; Kaviyarasu, K.; Kennedy, L.J.; Al-Lohedane, H.; Ramalingame, R. A luminescent metal–organic framework as an ideal chemosensor for nitroaromatic compounds. RSC Adv, 2017, 7(62), 38861.
[5]
Anand, K.; Kaviyarasu, K.; Muniyasamy, S.; Roopan, S.M.; Gengan, R.M.; Chuturgoon, A.A. Bio-synthesis of silver nanoparticles using agroforestry residue and their catalytic degradation for sustainable waste management. J. Cluster Sci., 2017, 28, 2279.
[6]
Rajan, I.P.; Vijaya, J.J.; Jesudoss, S.; Kaviyarasu, K.; Kennedy, L.; Jothiramalingam, R.; Al-Lohedan, H.; Vaali-Mohammed, M. Green-fuel-mediated synthesis of self-assembled NiO nano-sticks for dual applications—photocatalytic activity on Rose Bengal dye and antimicrobial action on bacterial strains. Mater. Res. Express, 2017, 4(8), 085030.
[7]
Fuku, X.; Matinise, N.; Masikini, M.; Kasinathan, K.; Maaza, M. An electrochemically active green synthesized polycrystalline NiO/MgO catalyst: Use in photo-catalytic applications. Mater. Res. Bull., 2018, 97, 457.
[8]
Magdalane, M.C.; Kaviyarasuc, K.; Vijay, J.J.; Siddhardhaf, B.; Kennedy, J.; Maaza, M. Evaluation on the heterostructured CeO2/Y2O3 binary metal oxide nanocomposites for UV/Vis light induced photocatalytic degradation of Rhodamine-B dye for textile engineering application. J. Alloys Compd., 2017, 727, 1324.
[9]
Kaviyarasu, K.; Magdalane, M.C.; Kanimozhi, K.; Kennedy, J.; Maaza, M. Elucidation of photocatalysis, photoluminescence and antibacterial studies of ZnO thin films by spin coating method. J. Photochem. Photobiol. B Biol, 2017, 173, 466-475.
[10]
Kaviyarasu, K.; Kanimozhi, K.; Matinise, N.; Magdalane, M.C.; Maaza, M. Antiproliferative effects on human lung cell lines A549 activity of cadmium selenide nanoparticles extracted from cytotoxic effects: Investigation of bio-electronic application. Mater. Sci. Eng. C, 2017, 76, 1012.
[11]
Magdalane, M.C.; Kaviyarasu, K.; Vijaya, J.J.; Siddhardha, B.; Jeyara, B. Facile synthesis of heterostructured cerium oxide/yttrium oxide nanocomposite in UV light induced photocatalytic degradation and catalytic reduction: Synergistic effect of antimicrobial studies. J. Photochem. Photobiol. B Biol, 2017, 173, 23.
[12]
Kaviyarasu, K.; Mariappan, A.; Neyvasagam, K.; Ayeshamariam, A.; Maaza, M. Photocatalytic performance and antimicrobial activities of HAp-TiO2 nanocomposite thin films by sol-gel method. Surf. Interfaces, 2017, 6, 247.
[13]
Magdalane, M.C.; Kaviyarasu, K.; Vijaya, J.J.; Jayakumar, C.; Jeyaraj, B. Photocatalytic degradation effect of malachite green and catalytic hydrogenation by UV–illuminated CeO2/CdO multilayered nanoplatelet arrays: Investigation of antifungal and antimicrobial activities. J. Photochem. Photobiol. B Biol, 2017, 169, 110.
[14]
Kudo, A.; Miseki, Y. Heterogeneous photocatalyst materials for watersplitting. Chem. Soc. Rev., 2009, 38, 253.
[15]
Konstantinou, I.K.; Albanis, T.A. TiO2-assisted photocatalytic degradation of azo dyes in aqueous solution: Kinetic and mechanistic investigations: A review. Appl. Catal. B Environ., 2004, 49, 1.
[16]
Hegen, J. Industrial Catalysis; WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, 2006.
[17]
Kaneko, M.; Okura, I. Kodansha encyclopedia of Japan. Kodansha -Springer, Tokyo, Japan, 2002.
[18]
Vassiltsova, O.V.; Parmon, V.N. Encyclopedic Dictionary of Named Processes in Chemical Technology; Taylor & Francis Group, LLC: UK, 2003.
[19]
Diebold, U. The surface science of titanium dioxide. Surf. Sci. Reports., 2003, 48, 53.
[20]
Frank, O.E. inorganic materials as catalysts for photochemical splitting of water. Chem. Mater., 2008, 20, 35.
[21]
Bojinova, A.; Kralchevska, R.; Poulios, I.; Dushkin, C. Anatase/rutile TiO2 composites: Influence of the mixing ratio on the photocatalytic degradation of Malachite Green and Orange II in slurry. Mater. Chem. Phys., 2007, 106, 187.
[22]
Michael, H.A. A surface science perspective on TiO2 photocatalysis. Surf. Sci. Reports., 2011, 66, 185.
[23]
Yamazaki, S.; Hori, K. CO2 reforming of methane over Ni–Ru and Ni–Pd bimetallic catalysts. Catal. Lett., 1999, 59, 19.
[24]
Wang, H.; Wu, Z.; Liu, Y.; Sheng, Z. The characterization of ZnO–anatase–rutile three-component semiconductor and enhanced photocatalytic activity of nitrogen oxides. J. Mol. Catal. A Chem., 2008, 287, 176.
[25]
Frank, C. Nanoengineering of particle surfaces. Adv. Mater., 2001, 13, 11.
[26]
Cushing, B.L.; Kolesnichenko, V.L.; O’Connor, C.J. Recent advances in the liquid-phase syntheses of inorganic nanoparticles. Chem. Rev., 2004, 104, 3893.
[27]
Bawendi, M.G.; Dabbousi, B.O.; Rodriguez-Viejo, J.; Mikulec, F.V.; Heine, J.R.; Mattoussi, H. Preparation, characterization, and photophysics of the quantum dot quantum well system cadmium sulfide/mercury sulfide/cadmium sulfide. J. Phys. Chem. B, 1997, 101, 9463.
[28]
Xiaogang, P. Experimental determination of the extinction coefficient of CdTe, CdSe, and CdS nanocrystals. Chem. Mater., 2003, 15, 2854.
[29]
Moungi, B. Type-II quantum dots: CdTe/CdSe(Core/Shell) and CdSe/ZnTe(Core/Shell) heterostructures. J. Am. Chem. Soc., 2003, 125, 11466.
[30]
Asl, K.S.H.; Rad, K.M.; Sadrnezhaad, S.K. The seeding effect on the microstructure and photocatalytic properties of ZnO nano powders. Mater. Lett., 2010, 64, 1935.
[31]
Sobana, N.; Swaminathan, M. The effect of operational parameters on the photocatalytic degradation of acid red 18 by ZnO. Separat. Purif. Technol., 2007, 56, 101.
[32]
Ding, Z.; Lu, G.Q.; Greenfield, P.F. adiabatic connection for kinetics. Phys. Chem. B, 2000, 104, 4815.
[33]
Daneshvar, N.; Salari, D.; Khataee, A.R. Photocatalytic degradation of azo dye acid red 14 in water on ZnO as an alternative catalyst to TiO2. J. Photochem. Photobiol. A Chem., 2004, 162, 317.
[34]
Chatterjee, D.; Dasgupta, S.H. Visible light induced photocatalytic degradation of organic pollutants. J. Photochem. Photobiol. C Photochem. Rev., 2005, 6, 186.
[35]
Gregorio, C. Non-conventional low-cost adsorbents for dye removal: A review. Biores. Technol., 2006, 97, 1061.
[36]
Gong, S.H.; Yao, D.; Feng, X.; Jiang, H. Quantum size dependent optical nutation in a core-shell CdSe/ZnS quantum dot. Microelectron J., 2006, 37, 904.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy