Time-Frequency Characteristic Analysis of Cutting Load for Pick Cutting Coal Seam

Title:Time-Frequency Characteristic Analysis of Cutting Load for Pick Cutting Coal Seam

Volume: 10 Issue: 4

Author(s): Chenxu Luo*, Shuangxi Jing , Xiaoming Han and Xiaoyu Yang

Affiliation:

• School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000,China

Keywords: Coal-rock interface, coal seam, EMD denoising, load spectrum analysis, marginal spectrum, wavelet denoising.

Abstract: Background: The load characteristics of pick cutting coal seam with coal-rock interface were studied by Time-frequency method in this paper. The common signal processing schemes were compared, and the suitable test load EMD (Empirical Mode Decomposition) empirical mode decomposition scheme for signal decomposition and denoising was selected.

Objective: The cutting load power spectra were obtained and the cutting load 3D (three dimensional) combined amplitude, time frequency, spectrum and marginal spectrum were obtained by Hilbert Huang transform.

Methods: The analysis by 3D combined amplitude, time frequency, spectrum and marginal spectrum shows that it becomes one of the main cutting bands of coal rock interface in 15Hz frequency band, which corresponds to the theoretical analysis of the load fluctuations in drum bands. Because the parameters related to the single cutting rotation frequency are affected by the interface change. The more obvious frequency components are near 45Hz and 75Hz which are due to the frequency doubling of the frequency variation with the interface load, which should be related to the frequency of the included angle with the pick speed.

Results: It can be seen from the power spectrum analysis of roller cutting test that the main frequency distribution is generated by the crossover motion parameters and the caving effect of the picking and the role of coal and rock, and the material parameters of the cutting object are related.

Conclusion: The coal load amplitude transition will appear with coal seams cut into the rock formation in the coal seam, which is consistent with the previous theoretical analysis and load characteristics analysis. The blasting of coal and rock has a great relationship with the homogeneity of coal and rock material itself, the material with the uniformity index is more stable, while the material load with smaller uniformity index fluctuates violently.

Cite this article as:

Luo Chenxu *, Jing Shuangxi , Han Xiaoming and Yang Xiaoyu , Time-Frequency Characteristic Analysis of Cutting Load for Pick Cutting Coal Seam, Recent Patents on Mechanical Engineering 2017; 10 (4) . https://dx.doi.org/10.2174/2212797610666171120162640