Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Review Article

Recent Patents on Preparation Methods and Mechanical Stability of Superhydrophobic Surface

Author(s): Zhaolong Li * and Yingtao Liu

Volume 16, Issue 3, 2022

Published on: 29 September, 2021

Article ID: e290921196907 Pages: 13

DOI: 10.2174/1872212115666210929115445

Price: $65

Abstract

Background: Superhydrophobic surfaces have unique wettability and have shown broad application prospects in many fields, such as self-cleaning and lubrication drag reduction. However, the superhydrophobic surfaces are severely restricted by their poor mechanical stability in practical application, and the mechanical stability of the superhydrophobic surface is always affected by different preparation methods. Therefore, people pay more attention to the preparation methods of superhydrophobic surfaces.

Objective: The study aims to improve the mechanical stability of the superhydrophobic surface and expand the application fields of the superhydrophobic surfaces; preparation methods of the superhydrophobic surface have been continuously improved.

Methods: This paper reviews various representative patents and papers on preparation methods of the superhydrophobic surface at home and abroad.

Results: In this review, the basic methods of preparing superhydrophobic surfaces were introduced, and three typical methods were summarized, such as etching method, coating method, and sol-gel method, then their advantages and disadvantages were discussed. In combination with the latest research progress, it is proposed that the use of environmentally friendly low surface energy modifiers and the use of the one-step method to prepare superhydrophobic surfaces are the future development trends. Aiming at the problem of the mechanical stability of superhydrophobic surfaces, the instability mechanism and stability evaluation methods of superhydrophobic surfaces under mechanical action are reviewed, and three basic methods to improve the mechanical stability of superhydrophobic surfaces are proposed.

Conclusion: The optimization of the preparation method of the superhydrophobic surface is beneficial to improve the mechanical stability of the superhydrophobic surface and expand the application prospect of the superhydrophobic surfaces in various fields. More patents and papers on the superhydrophobic surface will be invented later.

Keywords: Superhydrophobic, wettability, micro-nano rough structure, low surface energy, mechanical stability, oil-water separation, corrosion-resistant.

Graphical Abstract

[1]
J. Wang, X.T. Shi, X.H. Qiang, and Y.H. Liu, "Construction of long-acting superhydrophobic copper surface and its wear resistance and self-cleaning performance", Mat. Rev. B: Res. Papers, vol. 32, no. 24, pp. 4314-4318, 2018.
[2]
C.M. Yu, S. Sasic, and K. Liu, "Nature-inspired self-cleaning surfaces: mechanisms, modelling, and manufacturing", Chem. Eng. Res. Des., vol. 155, pp. 48-65, 2020.
[http://dx.doi.org/10.1016/j.cherd.2019.11.038]
[3]
W. Tong, and D.S. Xiong, "Bioinspired superhydrophobic materials: progress and functional application", J. Inorg. Mater., vol. 34, no. 11, pp. 1133-1144, 2019.
[4]
Y.L. Gao, K.M. Dai, L. Huang, C.C. Zheng, and T.L. Xin, "Research and application of superhydrophobic and anti-icing technology in highway pavement", Mater. Rev. B: Res. Papers, vol. 31, no. 01, pp. 103-109, 2017.
[5]
Y.W. Cai, S. Li, and Z.L. Cheng, "Facile fabrication of superhydrophobic FAS modified electroless Ni-P coating meshes for rapid water-oil separation", Colloids Surf. A Physicochem. Eng. Asp., vol. 540, pp. 224-232, 2018.
[http://dx.doi.org/10.1016/j.colsurfa.2017.12.068]
[6]
O.R. Ayra, C.R. Alvarez, and A.M. Escobar, "Robust and superhydrophobic coating highly resistant to wear and efficient in water/oil separation", Surf. Coat. Tech., vol. 364, pp. 330-340, 2019.
[http://dx.doi.org/10.1016/j.surfcoat.2019.01.077]
[7]
F.S. Yang, Y. Zhang, X.B. Liu, Y.Z. Chen, and W. Yang, "Construction of superhydrophobic-superoleophilic filter paper by seed growing method and its application in oil-water separation", Mater. Rev. B: Res. Papers, vol. 34, no. 04, pp. 4132-4136, 2020.
[8]
M. Cheng, S. Zhang, H. Dong, S. Han, H. Wei, and F. Shi, "Improving the durability of a drag-reducing nanocoating by enhancing its mechanical stability", ACS Appl. Mater. Interfaces, vol. 7, no. 7, pp. 4275-4282, 2015.
[http://dx.doi.org/10.1021/am5085012] [PMID: 25644454]
[9]
R. Weng, H.F. Zhang, and L. Yin, "Fabrication of superhydrophobic surface by oxidation growth of flower-like nanostructure on a steel foil", RSC Adv., vol. 7, no. 41, pp. 25341-25346, 2017.
[http://dx.doi.org/10.1039/C6RA28239C]
[10]
Y. Zhou, Y. Ma, Y. Sun, Z. Xiong, C. Qi, Y. Zhang, and Y. Liu, "Robust superhydrophobic surface based on multiple hybrid coatings for application in corrosion protection", ACS Appl. Mater. Interfaces, vol. 11, no. 6, pp. 6512-6526, 2019.
[http://dx.doi.org/10.1021/acsami.8b19663] [PMID: 30668101]
[11]
B.B. Wan, J.F. Yang, and D.M. Lu, "Superhydrophobic ceria on aluminum and its corrosion resistance", Surf. Interface Anal., vol. 48, no. 3, pp. 173-178, 2016.
[http://dx.doi.org/10.1002/sia.5940]
[12]
P.G. Yang, Y. Zheng, R.C. Peng, Y.B. Lou, and P. Yu, "Fabrication and corrosion resistance of superhydrophobic pdms -sio2/pani coating on a3 steel", Mater. Prot., vol. 51, no. 05, pp. 12-17, 2018.
[13]
C. Neinhuis, and W. Barthlott, "Characterization and distribution of water-repellent, self-cleaning plant surfaces", Ann. Bot. (Lond.), vol. 79, no. 6, pp. 667-677, 1997.
[http://dx.doi.org/10.1006/anbo.1997.0400]
[14]
L. Jiang, "Nanostructured materials with superhydrophobic surface-from nature to biomimesis", Chem Industry Eng Prog, vol. 23, no. 12, pp. 1258-1264, 2003.
[15]
T. Young, "An essay on the cohesion of fluids", Philos. Trans. R. Soc. Lond., vol. 95, pp. 65-87, 1805.
[http://dx.doi.org/10.1098/rstl.1805.0005]
[16]
N.R. Wenzel, "Resistance of solid surfaces to wetting by water", Ind. Eng. Chem., vol. 28, no. 8, pp. 988-994, 1936.
[http://dx.doi.org/10.1021/ie50320a024]
[17]
A.B.D. Cassie, "Baxters, “Wettability of porous surfaces", Trans. Faraday Soc., vol. 40, no. 1, pp. 546-551, 1944.
[http://dx.doi.org/10.1039/tf9444000546]
[18]
U. Trdan, M. Hočevar, and P. Gregorčič, "Transition from superhydrophilic to superhydrophobic state of laser textured stainless steel surface and its effect on corrosion resistance", Corros. Sci., vol. 123, pp. 21-26, 2017.
[http://dx.doi.org/10.1016/j.corsci.2017.04.005]
[19]
O. Arjmandi-Tash, N.M. Kovalchuk, A. Trybala, I.V. Kuchin, and V. Starov, "Trybala, “A Kinetics of wetting and spreading of droplets over various substrates", Langmuir, vol. 33, no. 18, pp. 4367-4385, 2017.
[http://dx.doi.org/10.1021/acs.langmuir.6b04094] [PMID: 28190350]
[20]
H.J. Butt, I.V. Roisman, and M. Brinkmann, "Characterization of super liquid-repellent surfaces", Curr. Opin. Colloid Interface Sci., vol. 19, no. 4, pp. 343-354, 2014.
[http://dx.doi.org/10.1016/j.cocis.2014.04.009]
[21]
T. Tran, B. Lee, and C. Ngo, "Durable superhydrophobic cotton filter prepared at low temperature for highly efficient hexane and water separation", J. Taiwan Inst. Chem. Eng., vol. 71, pp. 527-536, 2017.
[http://dx.doi.org/10.1016/j.jtice.2016.12.029]
[22]
C. Xue, M. Li, and X. Guo, "Fabrication of superhydrophobic textiles with high water pressure resistance", Surf. Coat. Tech., vol. 310, pp. 134-142, 2017.
[http://dx.doi.org/10.1016/j.surfcoat.2016.12.049]
[23]
C.F. Yi, Q. Chen, Z.X. Xu, P. Huang, and H.J. Liu, "Preparation method and application of superhydrophobic coating with photo-thermal effect", C.N. Patent 10,979,685,9A, 2019.
[24]
J.H. Shao, F. Xia, and F. Xu, "A preparation method of superhydrophobic membrane and its application", C,N, Patent 10,541,348,8A, 2016.
[25]
K. Chen, Q. Wang, X.J. Hu, and Z.X. Xia, "A UV resistant coating composition, preparation method and application", C.N. Patent 10,675,216,6A, 2017.
[26]
C. Li, C.H. Zhang, J. Cao, X.Q. Si, J.L. Qi, and J.C. Feng, "A method for preparing the superhydrophobic surface by powder hot pressing", C. N. Patent 11,067,006,2A, 2020.
[27]
X. Deng, Y. Tan, and X.M. Li, "An adaptive superhydrophobic surface and its preparation method", C. N. Patent 11,126,864,0A, 2020.
[28]
Y.Y. Sun, C.H. Qi, H. Chen, and Y.Q. Liu, "Preparation of superhydrophobic coating based on micro/nano inorganic particles co-reinforced fluorocarbon resin", C. N. Patent 11,113,891,7A, 2020.
[29]
X.W. Liu, H.F. Zhang, Y.J. Tuo, and W.T. Rong, "Preparation process of fluorine-free superhydrophobic surface", C. N. Patent 10,972,216,8A, 2019.
[30]
Z. Wang, X.Y. Chen, Y.F. Gong, B.T. Zhang, P.S. Zhou, K. Xin, and H. Li, "A wear-resistant superhydrophobic coating and its preparation method", C.N. Patent 10,698,783,5B, 2019.
[31]
H.Y. Wang, Z.J. Liu, X.G. Zhang, C.J. Wang, and Y.J. Zhu, "A long-term superhydrophobic wear-resistant ceramic coating", C.N. Patent 10,660,732,2B, 2019.
[32]
B. Song, Z. Yuan, and Y.J. Li, "A superhydrophobic conductive coating and its preparation method", C.N. Patent 10,705,756,8B, 2019.
[33]
P.W. Oskar, S.G. Kung, R.W. Lars-Erik, D.G. Li, Q. Can, K.T. Charlotta, and E.S. Jan-Christer, "Method to Prepare superhydrophobic surface on Sold Bodes by Rapid Expansion Solutions", U. S. Patent 87,221,43B2, 2014.
[34]
S.R. Yu, H. Li, and X.X. Han, "A method for preparing superhydrophobic CuO film on steel surface", C.N. Patent 10,472,687,5A, 2015.
[35]
J.M. Hu, and X.F. Zhang, "A preparation method of the wear-resistant superhydrophobic film", C.N. Patent 10,628,315,1B, 2018.
[36]
N. Li, X.Y. Cheng, L. Zhao, H.T. Wang, J. Li, and G.N. Zhu, "A fluorine-free superhydrophobic coating and its preparation method", C.N. Patent 10,683,325,1B, 2019.
[37]
B. Abuduliken, and M.D. Nesar, "Superhydrophobic coating containing silica nanoparticles", U.S. Patent 20,190,322,874, A1, 2019.
[38]
L.G. Gao, H.G. Yang, S.Z. Yang, T.L. Ma, and C.E. Hao, "A preparation method of the superhydrophobic surface with bionic micro nano composite structure", C. N. Patent 10,541,399,4A, 2016.
[39]
R. Jagdheesh, J.J. García-Ballesteros, and J.L. Ocana, "One-step fabrication of near superhydrophobic aluminum surface by nanosecond laser ablation", Appl. Surf. Sci., vol. 374, pp. 2-11, 2016.
[http://dx.doi.org/10.1016/j.apsusc.2015.06.104]
[40]
C.Y. Zhang, M.H. Lu, Z.L. Ma, W.J. Wang, and Z.H. Hong, "A superhydrophobic surface on the silicon substrate and its preparation method and application", C. N. Patent 11,133,082,9A, 2020.
[41]
Q.J. Xu, W. Liu, J. Han, and X.H. Chen, "Preparation method of the superhydrophobic surface of Cupronickel", C. N. Patent 10,522,015,5B, 2018.
[42]
Z.B. Zhang, C.L. Xu, J.W. Zhao, G.Y. Zhou, C. Jiang, K. Wang, Y.L. Rao, and W.G. Liu, "A method and application of SiO2 assisted HF etching stainless steel to prepare superhydrophobic surface", C. N. Patent 11,157,022,5A, 2020.
[43]
M. Zhang, M.M. Yu, X.J. Zhao, J. Sun, F. Liu, and L. Liu, "A method for preparing the superhydrophobic surface of Zr based amorphous alloy", C.N. Patent 11,014,461,3A, 2019.
[44]
Q. Wang, N. Wang, S.S. Xu, and X. Zheng, "A preparation method of the superhydrophobic surface with directional transport function", C. N. Patent 10,933,604,8B, 2020.
[45]
S.W. Cho, J.H. Kim, and H.M. Lee, "Superhydrophobic Si surfaces having microscale rod structures prepared in a plasma etching system", Surf. Coat. Tech., vol. 306, pp. 82-86, 2016.
[http://dx.doi.org/10.1016/j.surfcoat.2016.05.009]
[46]
Q.M. Gu, C.Y. Zhang, H. Zhu, K. Xu, S.J. Zhu, W. Jiang, and A.B. Wang, "A system and method for preparing the bionic superhydrophobic metal surface by laser electrochemical deposition", C.N. Patent 10,922,697,3A, 2019.
[47]
X.M. Chen, and Q. Li, "A method of preparing the superhydrophobic copper surface by one-step laser ablation", C. N. Patent 11,034,053,2A, 2019.
[48]
S.S. Latthe, P. Sudhagar, A. Devadoss, A.M. Kumar, C. Terashima, K. Nakata, and A. Fujishima, "A mechanically Bendable Superhydrophobic steel surface with self-cleaning and corrosion-resistant properties", J. Mater. Chem. A Mater. Energy Sustain., vol. 03, pp. 14263-14271, 2015.
[http://dx.doi.org/10.1039/C5TA02604K]
[49]
Y.C. Zhao, "Fabrication and Properties of Superhydrophobic Surface through the Sol-Gel and Electrodeposition Methods", Appl. Surf. Sci., vol. 258, no. 17, pp. 6531-6536, 2012.
[50]
H. Maleki, L. Whitmore, and N. Hüsing, "Novel multifunctional polymethylsilsesquioxane-silk fibroin aerogel hybrids for environmental and thermal insulation applications", J. Mater. Chem. A Mater. Energy Sustain., vol. 6, no. 26, pp. 12598-12612, 2018.
[http://dx.doi.org/10.1039/C8TA02821D] [PMID: 30713688]
[51]
Y.L. Shi, W. Yang, and X.J. Feng, "“Preparation of superhydrophobic and super-oleophilic cotton fabric and its application in oil-water separation”, J Chem", Coll. Univ., vol. 09, pp. 1724-1729, 2015.
[52]
F. Lian, Z.Y. Wang, and H.C. Zhang, "Surface preparation and durability of hydrophobic/superhydrophobic marine aluminum alloy", Mater. Des., vol. 43, no. 1, pp. 49-53, 2015.
[53]
G. Gong, K. Gao, J. Wu, N. Sun, C. Zhou, Y. Zhao, and L. Jiang, "A highly durable silica/polyimide superhydrophobic nanocomposite film with excellent thermal stability and abrasion-resistant performance", J. Mater. Chem. A Mater. Energy Sustain., vol. 3, pp. 713-718, 2015.
[http://dx.doi.org/10.1039/C4TA04442H]
[54]
J. Wu, X. Li, Y. Wu, G. Liao, P. Johnston, P.D. Topham, and L. Wang, "Rinse-resistant superhydrophobic block copolymer fabrics by electrospinning, electrospraying and thermally-induced self-assembly", Appl. Surf. Sci., vol. 422, pp. 769-777, 2017.
[http://dx.doi.org/10.1016/j.apsusc.2017.06.076]
[55]
Q.H. Wang, H.X. Wang, Z.D. Wang, and G.F. Sun, "Highly-efficient nanosecond laser-based multifunctional surface fabrication and corrosion-resistance performance", Chin. J. Lasers, pp. 1-23, 2021.
[56]
X.J. Wang, F. Qiu, J.W. Yang, and G.L. Zhang, "Preparation of superhydrophobic polymer fiber", C. N. Patent 10,586,243,2B, 2018.
[57]
W. Liu, P.S. Li, X.L. Zhu, and L.L. Wang, "Preparation of superhydrophobic fiber membrane", C. N. Patent 10,747,590,2A, 2017.
[58]
F. Li, R.K. Zhang, and R.D. Guo, "Preparation of polylactic acid nanofibers by electrospinning and their oil absorption properties", J. Mar. Sci. Eng., vol. 36, no. 2, pp. 268-271, 2018.
[59]
S.M. Emarati, and M. Mozammel, "Efficient one-step fabrication of superhydrophobic nano-TiO2/TMPSi ceramic composite coating with enhanced corrosion resistance on 316L", Ceram. Int., vol. 46, no. 02, pp. 1652-1661, 2020.
[http://dx.doi.org/10.1016/j.ceramint.2019.09.137]
[60]
J.F. Sun, and W.Q. Wang, "A method for preparing superhydrophobic structure based on 3D printing", C. N. Patent 11,012,539,4B, 2020.
[61]
Y.F. Shen, and H. Rao, "A method for preparing superhydrophobic surface on silicone rubber surface", C. N. Patent 10,965,163,9A, 2019.
[62]
F.Z. Wang, C.F. Feng, P. Liu, Y. Gao, and L. Yang, "A kind of magnesium oxychloride cement with superhydrophobic surface and its nano casting process", C. N. Patent 10,824,782,0B, 2020.
[63]
J.H. Lee, D.H. Kim, S.W. Han, B.R. Kim, E.J. Park, M.G. Jong, J.H. Kim, and Y.D. Kim, "Fabrication of superhydrophobic fibre and its application to selective oil spill removal", Chem. Eng. J., vol. 289, pp. 1-6, 2016.
[http://dx.doi.org/10.1016/j.cej.2015.12.026]
[64]
Y. Liao, C.H. Loh, R. Wang, and A.G. Fane, "Electrospun superhydrophobic membranes with unique structures for membrane distillation", ACS applied materials & interfaces, vol. 6, pp. 16035-16048, 2014.
[http://dx.doi.org/10.1021/am503968n]
[65]
G.H. Zhang, and L.L. Li, "Preparation of polycaprolactone superhydrophobic electrospinning films by one-step molding", C.N. Patent 10,933,859,7A, 2019.
[66]
Z.W. Shi, Z.H. Wu, F. Zhang, C.Y. Xu, and C.S. Peng, "Methods for constructing superhydrophobic surface with high adhesion", C.N. Patent 10,621,999,6B, 2018.
[67]
W.L. Li, Z.X. Li, Q. Liu, and Y. Sun, "A superhydrophobic fabric and its preparation method", C. N. Patent 11,147,217,1A, 2020.
[68]
Y.Z. Xia, Z. Xiong, C. Zheng, and C.Y. Lin, "A superhydrophobic seaweed fiber fabric and its preparation method and application", C. N. Patent 11,133,504,2A, 2020.
[69]
J.J. Tao, Y.Z. Shen, G.Y. Wang, and Y.H. Xie, "In situ construction method and application of micro-nano hierarchical superhydrophobic surface", C. N. Patent 10,732,158,3B, 2020.
[70]
E.B. Caldona, A.C.C. Leon, P.G. Thomas, D.F. Naylor, B.B. Pajarito, and R.C. Advincula, "Superhydrophobic rubber modified poly benzoxazine/SiO2, nanocomposite coating with anti-corrosion, anti-ice, and superoleophilicity properties", Ind. Eng. Chem. Res., vol. 56, pp. 1485-1497, 2017.
[http://dx.doi.org/10.1021/acs.iecr.6b04382]
[71]
B. Jiang, Y. Zhao, L.L. Zeng, T. Liang, and Y.X. Qiao, "Preparation of superhydrophobic coating with micro-nano structure by electrodeposition and its corrosion resistance to seawater", Corrosion & Protection, vol. 39, no. 10, pp. 747-751, 2018.
[72]
D. Song, G.W. Wang, X.R. Zhuo, J.H. Jiang, A.B. Ma, C. Qiu, and Y.H. Li, "A method for constructing superhydrophobic corrosion-resistant conversion film on the surface of magnesium-lithium alloy and magnesium-lithium alloy with superhydrophobic corrosion resistance", C.N. Patent 11,059,256,9B, 2021.
[73]
L.B. Boinovich, E.B. Modin, A.R. Sayfutdinova, K.A. Emelyanenko, A.L. Vasiliev, and A.M. Emelyanenko, "Combination of functional nanoengineering and nanosecond laser texturing for the design of superhydrophobic aluminum alloy with exceptional mechanical and chemical properties", ACS Nano, vol. 11, no. 10, pp. 10113-10123, 2017.
[http://dx.doi.org/10.1021/acsnano.7b04634] [PMID: 28873295]
[74]
Y.T. Zhang, J.D. Liu, W.Z. Miao, and X. Zhang, "A method to prepare superhydrophobic coatings with self-cleaning and antibacterial functions", C.N. Patent 10,785,804,6B, 2020.
[75]
C.B. Huang, T. Lu, J. Zhang, and W.J. Ma, "A self-cleaning superhydrophobic nanofiber membrane and its preparation method", C.N. Patent 11,163,250,4A, 2020.
[76]
M. Zhang, J. Zhang, G.Y. Tian, J. Zhao, H. Yan, and K. Guo, "Preparation and application of a superhydrophobic foam iron", C.N. Patent 11,153,012,6A, 2020.
[77]
F.X. Qiu, J. Rong, T. Zhang, Q. Guo, Y. Zhu, D.Y. Yang, and J.C. Xu, "Preparation and application of biomimetic superhydrophobic membrane based on copper foam", C. N. Patent 10,749,730,2B, 2020.
[78]
D. Lewis, L. Baton, and C.R. Baton, "Omposite textile hydrophobic insulation", U. S. Patent 20,190,143,634, A1, 2019.
[79]
P.F. Zareei, H. Karimi, and A.V. Madadi, "Preparationof a superhydrophobic and superoleophilic polyester textile by chemical vapor deposition of dichlorodimethylsilane for Water–Oil separation", Polyhedron, vol. 159, pp. 54-63, 2019.
[http://dx.doi.org/10.1016/j.poly.2018.11.040]
[80]
F. Lian, J.Z. Tan, and H.C. Zhang, "Effect of surface morphology on wettability and anti-adhesion properties", Functional Materials, no. 2, pp. 2105-2109, 2014.
[81]
W.D. Wu, F.F. Wang, and R. Shen, "Experimental study on icing resistance of aluminum superhydrophobic surface at different substrate temperatures", J. Refrig., vol. 38, no. 3, pp. 82-88, 2017.
[82]
Y. Yasuhiro, I. Tasuku, K. Natsumi, and U. Shigeru, "Water repellent coating film and product provided with same", U. S. Patent 20,190,351,450, A1, 2019.
[83]
M. Shateri-Khalilabad, M.E. Yazdanshenas, and A. Etemadifar, "Fabricating multifunctional silver nanoparticles-coated cotton fabric", Arab. J. Chem., vol. 10, pp. 2355-2362, 2017.
[http://dx.doi.org/10.1016/j.arabjc.2013.08.013]
[84]
C.Y. Wang, and W.B. Zhang, "A preparation method of highly wear-resistant superhydrophobic surface", C. N. Patent 10,670,012,4B, 2019.
[85]
Y.Q. Qing, K. An, C. Long, S. Shan, and C.S. Liu, "Research progress of superhydrophobic surface with mechanical high robustness-state", Surf. Technol., vol. 50, no. 01, pp. 1-9, 2021.
[86]
V. Kondrashov, and J. Rühe, "Microcones and nanograss: toward mechanically robust superhydrophobic surfaces", Langmuir, vol. 30, no. 15, pp. 4342-4350, 2014.
[http://dx.doi.org/10.1021/la500395e] [PMID: 24628022]
[87]
M. Ren, Y.S. Li, X. Hu, and C.Y. Tang, "Research progress on mechanical stability of superhydrophobic nanocomposite coatings", China Plastics Industry., vol. 47, no. 03, pp. 8-13, 2019.
[88]
C.Y. Wu, J.J. Huang, X.G. Li, J.H. Wu, B. Hou, and M.J. Chen, "New progress of fabrication techniques for metal-based superhydrophobic surfaces", J. Harbin Inst. Technol., pp. 1-27, 2020.
[89]
Y.M. Zhang, Y. Chen, Z.X. Sun, D. Xu, Y. Gou, and S.M. Du, "Research progress on mechanical property of composite superhydrophobic coatings", Surf. Technol., vol. 50, no. 01, pp. 277-286, 2021.
[90]
F. Yang, Z.Q. Yan, G. Shi, and L.J. Zhou, "A preparation method of superhydrophobic material with good mechanical stability", C.N. 11,170,182,3A, 2020.
[91]
X. Tian, T. Verho, and R.H. Ras, "Surface wear moving superhydrophobic surfaces toward real-world applications", Sci., vol. 352, no. 6282, pp. 142-143, 2016.
[http://dx.doi.org/10.1126/science.aaf2073] [PMID: 27124437]
[92]
R. Pan, and M.L. Zhong, "Fabrication of superwetting surfaces by ultrafast lasers and mechanical durability of superhydrophobic surfaces", Chin. Sci. Bull., vol. 64, no. 12, pp. 1268-1289, 2019.
[http://dx.doi.org/10.1360/N972019-00009]
[93]
J.M. He, J. He, M.J. Yuan, M.H. Xue, X.R. Liu, and M.N. Qu, "Research progress of superhydrophobic materials with high-stability property", Chem. Ind. Eng. Prog., vol. 38, no. 07, pp. 3013-3027, 2019.
[94]
D.W. Li, "Study on construction of biomimetic super-hydrophobic coatings on magnesium alloys and corrosion resistance behavior", Appl. Surf. Sci., vol. 501, p. 144137, 2020.
[95]
J. Groten, and J. Rühe, "Surfaces with combined microscale and nanoscale structures: A route to mechanically stable superhydrophobic surfaces?", Langmuir, vol. 29, no. 11, pp. 3765-3772, 2013.
[http://dx.doi.org/10.1021/la304641q] [PMID: 23363078]
[96]
D.S. Xiong, and N. Wang, "A durable ice-resistant superhydrophobic coating and its preparation method", C. N. Patent 10,642,378,9A, 2017.
[97]
X. Liu, F. Zhang, J.Y. Liu, Z.A. Liu, J.C. Zhang, Z.T. Zhang, J.L. Song, and J. Sun, "A preparation method of superhydrophobic aeronautical steel surface with mechanical and chemical stability", C.N. Patent 11,040,898,3A, 2019.
[98]
Y. Lu, S. Sathasivam, J. Song, C.R. Crick, C.J. Carmalt, and I.P. Parkin, "Repellent materials. Robust self-cleaning surfaces that function when exposed to either air or oil", Science, vol. 347, no. 6226, pp. 1132-1135, 2015.
[http://dx.doi.org/10.1126/science.aaa0946] [PMID: 25745169]
[99]
B.J. Qi, C.Y. Cui, and X.F. Gao, "A superhydrophobic coating with strong durability and its preparation method", C. N. Patent 11,162,104,9A, 2020.
[100]
Y.J. Lee, E.A. You, and Y.G. Ha, "Facile one-step construction of covalently networked, self-healable, and transparent superhydrophobic composite films", Appl. Surf. Sci., vol. 445, pp. 368-375, 2018.
[http://dx.doi.org/10.1016/j.apsusc.2018.03.201]
[101]
A.M. Rather, and U. Manna, "Stretchable and durable superhydrophobicity that acts both in air and under oil", J. Mater. Chem. A Mater. Energy Sustain., vol. 5, no. 29, pp. 15208-15216, 2017.
[http://dx.doi.org/10.1039/C7TA04073C]
[102]
J.J. Lu, B.R. Wu, S.L. Xin, J. Liu, J.S. Yang, D.Z. Zhang, and C.Y. Peng, "Preparation and durability of modified epoxy resin-based nano-alumina superhydrophobic coating", China Surf. Eng., vol. 32, no. 05, pp. 144-150, 2019.

Rights & Permissions Print Cite
Article Metrics
39
2
© 2024 Bentham Science Publishers | Privacy Policy