Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

The Design of Modular Oil Tank: A New Design Process Model

Author(s): Jin Li*, Xingsheng Jiang, Jingye Li, Yadong Zhao and Xuexing Li

Volume 16, Issue 1, 2022

Published on: 07 December, 2020

Article ID: e211221188771 Pages: 12

DOI: 10.2174/1872212115999201207115104

Price: $65

Abstract

Background: In the whole design process of modular fuel tank, there are some unreasonable phenomena. As a result, there are some defects in the design of modular fuel tank, and the function does not meet the requirements in advance. This paper studies this problem.

Objective: Through on-the-spot investigation of the factory, a mechanical design process model is designed. The model can provide reference for product design participants on product design time and design quality, and can effectively solve the problem of low product design quality caused by unreasonable product design time arrangement.

Methods: After sorting out the data from the factory investigation, computer software is used to program and simulate the information input of mechanical design process, and the final reference value is obtained.

Results: This mechanical design process model is used to guide the design and production of a new project, nearly 3 months ahead of the original project completion time.

Conclusion: This mechanical design process model can effectively guide the product design process, which is of great significance to the whole mechanical design field.

Keywords: Modular design, system theory, ergonomics, design process model, simulation, mechanical design.

Graphical Abstract

[1]
R. Kohler, Mechanical design methodology., Federal Germany, 1981.
[2]
A.K. Goel, "Design, analogy, and creativity", IEEE Expert, vol. 12, no. 3, pp. 62-70, 1997.
[http://dx.doi.org/10.1109/64.590078]
[3]
K. Zheng Zhou, "Innovation, imitation, and new product performance: the case of China", Ind. Mark. Manage., vol. 35, no. 3, pp. 394-402, 2006.
[http://dx.doi.org/10.1016/j.indmarman.2005.10.006]
[4]
T.W. Mak, and L.H. Shu, "Abstraction of biological analogies for design", CIRP Annals-Manufacturing Technology, vol. 53, no. 1, pp. 117-120, 2004.
[http://dx.doi.org/10.1016/S0007-8506(07)60658-1]
[5]
G.S. Al’tsuller, "The innovation algorithm: TRIZ, systematic creativity", Technical Innovation Center, innovation and technical Inc., Worcester, MA., 1999.
[6]
J. Dowell, and J. Long, "Target paper: conception of the cognitive engineering design problem", Ergonomics, vol. 41, no. 2, pp. 126-139, 1998.
[http://dx.doi.org/10.1080/001401398187125]
[7]
W Visser, The cognitive artifacts of designing.
[8]
A.K. Goel, S. Vattam, and B. Wiltgen, "“Cognitive, collaborative, conceptual and creative-Four characteristics of the next generation of knowledge-based CAD systems”: A study in biologically inspired design", Comput. Aided Des., vol. 44, no. 10, pp. 879-900, 2012.
[http://dx.doi.org/10.1016/j.cad.2011.03.010]
[9]
T.H. Takeda, H. Tomiyama, and H. Yoshikawa, "Modelling design processes", AL Magazine, vol. 11, no. 04, pp. 37-48, 1990.
[10]
T. Tomiyama, "A design process model that unifies general design theory and empirical findings", ASME Design Eng., vol. 83, no. 2, pp. 329-340, 1995.
[11]
H. Yoshikawa, "Introduction to general design theory", Intelligent Manufacturing Systems., vol. 45, no. 8, pp. 20-26, 1979.
[12]
Dossou Paul-Eric, "Using industry 4.0 concepts and theory of systems for improving company supply chain: the example of a joinery", 29th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2019), 2019pp. 1750-1757 Limerick, Ireland
[13]
N.P. Suh, The Principles of Design., Edition Oxford University Press, 1990.
[14]
D. Schmid, and N.A. Stanton, "How are laser attacks encountered in commercial aviation? A hazard analysis based on systems theory", Saf. Sci., vol. 110, pp. 178-191, 2018.
[http://dx.doi.org/10.1016/j.ssci.2018.08.012]
[15]
D.M. Freestone, and F. Balcı, "Bayesian Behavioral Systems Theory", Behav. Processes, vol. 168, 2019.
[http://dx.doi.org/10.1016/j.beproc.2019.103904] [PMID: 31477278]
[16]
H. Favela Luis, and M.J.W. Marieke, "Reasoning across continuous landscapes: A nonlinear dynamical systems theory approach to reasonin", Cogn. Syst. Res., vol. 54, pp. 189-198, 2019.
[http://dx.doi.org/10.1016/j.cogsys.2018.12.013]
[17]
M. Lom, and O. Pribyl, "Smart city model based on systems theory", Int. J. Inf. Manage., 2020.
[http://dx.doi.org/10.1016/j.ijinfomgt.2020.102092]
[18]
S. Wang, and P. Wang, "A prediction method for urban heat supply based on grey system theory", Sustainable Cities and Society, vol. Vol. 52, 2020.
[http://dx.doi.org/10.1016/j.scs.2019.101819]
[19]
D. Manuel, On the properties of some operators under the perspective of fractional system theory., Common Nonlinear Sci Numer Simulat, 2020.
[20]
S. Garcia, and C.T. Trinh, "Modular design: Implementing proven engineering principles in biotechnology", Biotechnol. Adv., vol. 37, no. 7, 2019.
[http://dx.doi.org/10.1016/j.biotechadv.2019.06.002] [PMID: 31181317]
[21]
M. Mutingi, P. Dube, and C. Mbohwa, "A modular product design approach for sustainable manufacturing in a fuzzy environment", Pcocedia Manufacturing., vol. 8, pp. 471-478, 2017.
[http://dx.doi.org/10.1016/j.promfg.2017.02.060]
[22]
F. Belkadi, "“Modular design of production systems tailored to regional market requirements”: A Frugal Innovation perspective", IFAC PapersOnLine., vol. 51, no. 11, pp. 98-101, 2018.
[http://dx.doi.org/10.1016/j.ifacol.2018.08.241]
[23]
H. Al-Libawy, A. Al-Ataby, W. Al-Nuaimy, and M.A. Al-Taee, "Modular design of fatigue detection in naturalistic driving environments", Accid. Anal. Prev., vol. 120, pp. 188-194, 2018.
[http://dx.doi.org/10.1016/j.aap.2018.08.012] [PMID: 30170293]
[24]
A. Sánchez, and M. Martín, "Scale up and scale down issues of renewable ammonia plants, Towards modular design", Sustainable Production and Consumption., vol. 16, pp. 176-192, 2018.
[http://dx.doi.org/10.1016/j.spc.2018.08.001]
[25]
S. Konda, and J.C. Zhao, "Enantioselective anti-Mannich reaction catalyzed by modularly designed organocatalysts", Tetrahedron, vol. 74, no. 42, pp. 6166-6172, 2018.
[http://dx.doi.org/10.1016/j.tet.2018.09.006] [PMID: 30923409]
[26]
A.J. Baptista, D. Peixotoa, A.D. Ferreiraa, and J.P. Pereiraa, "Lean “Design-for-X methodology: Integrating Modular Design, Structural Optimization and Ecodesign in a machine tool case study”", Procedia CIRP., vol. 69, pp. 722-727, 2018.
[http://dx.doi.org/10.1016/j.procir.2017.12.003]
[27]
M. Kargar, A. Isazadeh, and H. Izadlchah, "Multi-programming language software systems modularization", Comput. Electr. Eng., vol. 80, 2019.
[http://dx.doi.org/10.1016/j.compeleceng.2019.106500]
[28]
F.M. Al-Fadhlia, "Modular Design of Carbon-Hydrogen-Oxygen Symbiosis Networks over a Time Horizon with Limited Natural Resources Chemical Engineering & Processing", Process Intensification., vol. 141, 2019.
[http://dx.doi.org/10.1016/j.cep.2019.107535]
[29]
S. Kang, "Temperature-responsive thermal meta materials enabled by modular design of thermally tunable unit cells", Int. J. Heat Mass Transf., vol. 130, pp. 469-482, 2019.
[http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.10.127]
[30]
L. Wu, and L. Liu, "A machine learning-based method to design modularmeta materials", Extreme Mech. Lett., vol. 36, pp. 36- 100657, 2020.
[31]
S. Lim, and C. D’ Souza, "A narrative review on contemporary and emerging uses of inertial sensing in occupational ergonomics", Int. J. Ind. Ergon., vol. 26, pp. 76-102937, 2020.
[http://dx.doi.org/10.1016/j.ergon.2020.102937]
[32]
J.J. Smallwood, "Designing for Construction Ergonomics", Procedia Manufacturing., vol. 3, pp. 6400-6407, 2015.
[http://dx.doi.org/10.1016/j.promfg.2015.07.970]
[33]
E. Azadeh, and V.Salehi Roudi, "Optimum design approach based on integrated macro-ergonomics and resilience engineering in a tile and ceramic factory", Saf. Sci., vol. 96, pp. 62-74, 2017.
[http://dx.doi.org/10.1016/j.ssci.2017.02.017]
[34]
B.A. Kadi, "Current research and future perspectives on human factors and ergonomics in Industry 4.0", Comput. Ind. Eng., pp. 137-100604, 2019.
[35]
H. Kagermann, W. Wahlster, and H. Johannes, Recommendations for implementing the strategic initiative GERMAN INDUSTRIE 4.0. Final Report of the Industrie 4.0Working Group. Germany, 2013.
[36]
T. John, and MD.FRCP Anderson, "Optimizing ergonomics during endoscopy training", Tech. Gastrointest. Endosc., vol. 21, pp. 143- 14, 2019.
[http://dx.doi.org/10.1016/j.tgie.2019.07.002]
[37]
F. Beuß, J. Sender, and W. Fliigge, "Ergonomics Simulation in Aircraft Manufacturing-Methods and Potentials", 52nd CIRP Conference on Manufacturing Systems,Procedia CIRP, vol. 81, 2019pp. 742-746

Rights & Permissions Print Cite
Article Metrics
23
1
© 2024 Bentham Science Publishers | Privacy Policy