A Novel Approach of Solving Output Displacement of Compliant Mechanism Based on Integration Method

Author(s): Jinliang Gong , Xiang Li , Yanfei Zhang* , Kazi Mostafa .

Journal Name: Micro and Nanosystems

Volume 11 , Issue 1 , 2019

Become EABM
Become Reviewer

Graphical Abstract:


Abstract:

Background: Micro-positioning platform is a device with high accuracy of positioning and a certain range of motion. Accuracy of the micro-positioning mechanism is ensured by using a flexible hinge to replace the traditional motion pair.

Objective: A two-dimensional micro-positioning platform is proposed in this study. It is necessary to find out how the geometric parameters affect the output displacement of the amplification structure component. Thus, this paper aims to build up the relation model of stiffness and geometric parameters.

Method: A novel method for building the relational model of parameters and output displacement is introduced on the basis of the superposition principle of small deformation and the principle of deflection. Firstly, the amplification structure is divided into different units according to the section shape and force. Secondly, the parametric model of integral deflection curve of the amplification structure is solved. The method is based on the flexibility matrix of the flexible hinge unit and the differential equation of the deflection curve of the rectangular unit. Finally, the parametric model of output displacement is established by using the integral deflection curve equation and geometric relationship between adjacent deformations of the compliant structure.

Result: It is shown that the output displacements by analysis method are close to the results achieved by the ANSYS software, with a maximal difference of 15.3%. The reason is that the integral deflection curve is not smooth at some special points, which is verified by finite element analysis.

Keywords: Micro-positioning platform, compliant mechanisms, flexibility matrix, deflection curve, finite element analysis, integration method.

[1]
Liguo, C.; Lining, S.; Xinqian, B. Macro/Micro positioning technique for micromanipulation. Mod. Mach. Tool Automat. Manu. Techn., 2005, 5, 49-51.
[2]
Shihua, L.; Xueyan, H.; Qixiang, M. Research on novel parallel micro-positioning precision platform with flexible hinge. China Mech. Eng, 2016, 27(7), 888-893.
[3]
Xiao, X.Q.; Li, X.X.; Yang, Z.G.; Cheng, G.M. Research on the device of cell medicine microinjection based on piezoelectric actuator. Mach. Design Manu., 2005, 12, 29-31.
[4]
Yu, J.J.; Hao, G.B.; Chen, G.M.; Bi, S. State-of-art of compliant mechanisms and their applications. J. Mech. Eng., 2015, 51(13), 53-68.
[5]
Shanzeng, L.; Zhencai, Z.; Hongxin, W. Recent development of flexible parallel manipulators. Mod. Mach. Tool Automat. Manu. Techn., 2010, 5, 1-7.
[6]
Li, Y.; Xu, Q. A totally decoupled piezo-driven XYZ flexure parallel micropositioning stage for micro/nanomanipulation. IEEE Trans. Autom. Sci. Eng., 2011, 8(2), 265-279.
[7]
Lifang, Q.; Minglei, H.; Wei, L. Pseudo-rigid-body model of a six-bar full-compliant mechanism. J. Univ. Sci. Technol. Beijing, 2013, 35(5), 682-686.
[8]
Yuliang, L.; Weibin, R.; Lining, S. Analysis on stiffness model of 3-PPSR flexible parallel robot with high aspect ratio based on finite element method. Robot, 2014, 6, 730-736.
[9]
Jingjun, Y.; Shusheng, B.; Guanghua, Z. Analysis for the static stiffness of a parallel guiding compliant mechanism. Mech. Sci. Technol. Aerospace Eng., 2003, 22(2), 241-244.
[10]
Lining, S.; Wei, D.; Zhijiang, D. Kinematics analysis of a parallel manipulator with long travel range flexure hinges based on geometric nonlinear method. J. Mech. Eng., 2005, 41(10), 71-74.
[11]
Yingfei, W.; Zhaoying, Z. Design of flexure hinges. Eng. Mech., 2002, 19(6), 136-140.
[12]
Marinello, F.; Balcon, M.; Schiavuta, P.; Carmignato, S.; Savio, E. Thermal drift study on different commercial scanning probe microscopes during the initial warming-up phase. Meas. Sci. Technol., 2011, 22(9), 94016.
[13]
Naganawa, A.; Mori, S.; Tada, H.; Shibuya, Y.; Obinata, G.; Ouchi, K. Finite element method analysis and control of micro actuator with piezoelectric element for spinstand. Microsyst. Technol., 2005, 11(8-10), 606-611.


Rights & PermissionsPrintExport Cite as

Article Details

VOLUME: 11
ISSUE: 1
Year: 2019
Page: [72 - 79]
Pages: 8
DOI: 10.2174/1876402911666190204114431

Article Metrics

PDF: 19
HTML: 4
EPUB: 1
PRC: 1