Recent Patents on Electromachining of Microelectrodes

Author(s): Xiaowei Ni, Baocheng Xie*, Yongqiu Chen, Yangwei Wang.

Journal Name: Recent Patents on Mechanical Engineering

Volume 12 , Issue 1 , 2019

Submit Manuscript
Submit Proposal

Abstract:

Background: Electromachining technology is widely used in micro manufacturing of microshafts, micro-holes, micro-grooves and other micro three-dimensional structures, which contributes to the giant demands for tool electrode. More and more attention has been paid on the electromachining of microelectrodes.

Objective: To meet the increasing requirement of machining quality and machining efficiency of electromachining of microelectrodes, the processing devices and processing methods of electromachining of microelectrodes are continuously improved.

Methods: This paper reviews various current representative patents related to the processing devices and processing methods of electromachining of microelectrodes.

Results: Through comparing different kinds of processing devices and processing methods of electromachining of microelectrodes, the main problems in the current development such as machining efficiency and machining quality of electromachining of micro electrode are concluded and analyzed, and the future development trends of processing devices and processing methods of electromachining of microelectrodes are discussed.

Conclusion: The optimization of processing devices and processing methods of electromachining of microelectrodes is advantageous for solving the problems of machining efficiency and machining quality, and more relevant patents will be invented in the future.

Keywords: Electromachining, microelectrodes, machining efficiency, machining quality, processing devices, processing methods.

[1]
Laser DJ, Santiago JG. A review of micropumps. J Micromech Microeng 2004; 14(6): R35.
[2]
Chen F, Wang BR, Shi W, Zhang YB. An overview of research status of micro EDM technology. Electromachining Mould 2015; 1: 6-10.
[3]
Hu FQ, Wang ZL, Zhao WS, Jia BX, Zhang Y. Research and application of wire electrode discharge grinding (WEDG) technology. JHIT 2003; 35(10): 1171-4.
[4]
Meng J, Bai JC, Li Q, Cao Y. Process study on machining of large length to diameter ratio fine electrode by micro-EDM. Modular Mach Tool Auto MFRG Tech 2016; 1: 140-3.
[5]
Hou WW. Study on micro-EDM technology of precision microstructure. MA Dissertation, Changchun University of Science and Technology, Changchun, China, December 2016.
[6]
Zhu BG, Wang ZL. Electrical machining technology of micro shaft. Electromachining Mould 2005; 4: 1-4.
[7]
He XL. Research on the combination machining technology of EDM and ECM for precision micropore. MA Dissertation, Harbin Institute of Technology, Harbin, China, July 2012.
[8]
Qu XW. Development and experimental study of complex micro EDM electrode processing equipment. MA Dissertation, Guangdong University of Technology, Guangdong, China, May 2016.
[9]
Liu LB, Zhang LY. On-line fabrication and modification of tool electrodes by block electrode reverse copy method. Tool Eng 2014; 48(6): 54-6.
[10]
Liu YT, Guo ZN, He JW. Mechanism and experimental study on composite machining of alloy spherical electric spark and mechanical grinding. MFRG Automation 2014; 21: 8-11.
[11]
Li MH, Liu Y, Guo CS, Wang MY, Niu JR, Niu J. Electrochemical machining model and experiment of micro-column electrode with high rotation precision. Chin J Aeronauti 2016; 37(12): 3864-72.
[12]
Gil R, Sanchez JA, Ortega N, Plaza S, Izquierdo B, Pombo I. High-aspect ratio micro-pin manufacturing using Inverse Slab Electrical Discharge Milling (ISEDM) process. Int J Adv Manuf Technol 2013; 65(9-12): 1459-69.
[13]
Shu XY, Zhang HH, Zhang F, Xie D. High-efficiency micro-EDM processing technology for micro nozzle production. JHUST 2010; 2: 48-51.
[14]
Yin QF, Wang XQ, Wang P, Qian ZQ, Zhou L, Zhang YB. Machining of micro rod electrode by electrical discharge grinding using two block electrodes. J Mater Process Technol 2016; 234: 143-9.
[15]
Hourmand M, Sarhan AAD, Yusof NM. Proposing new machining and measurement techniques of microelectrodes with high aspect ratio for micro EDM drilling of tungsten Carbide using EDM machine. Measurement 2017; 97: 64-78.
[16]
Zhang L, Tong H, Li Y. Precision machining of micro tool electrodes in micro EDM for drilling array micro holes. Precis Eng 2015; 39: 100-6.
[17]
Wang JY, Dong YS. Developing a process chain with WEDG technology and pulse ECM to fabricate ultra micro pins. Procedia CIRP 2016; 42: 815-8.
[18]
Wang Y. Study on rotary electrode wriggling compensation spindle and micro electrode EDM. MA Dissertation, Harbin Institute of Technology, Harbin, China, June 2014.
[19]
Ji RJ, Liu YH, Zhang YZ, Cai BP, Li H, Ma JM. Optimizing machining parameters of silicon carbide ceramics with ED milling and mechanical grinding combined process. Int J Adv Manuf Technol 2010; 51(1-4): 195-204.
[20]
He XH, Chen YH, Yang GY, Zhou SR, Lin B. Research on the technology of accurately producing large diameter ratio microelectrodes by reverse copying method. MTF 2018; 46(10): 18-22.
[21]
Ji RJ, Liu YH, Zhang YZ, Wang F. Machining performance of silicon carbide ceramic in end electric discharge milling. Int J Refract Met H 2011; 29(1): 117-22.
[22]
Ji RJ, Cai BP, Ma JM, Li X. Influence of dielectric and machining parameters on the process performance for electric discharge milling of SiC ceramic. Int J Adv Manuf Technol 2012; 59(1-4): 127-36.
[23]
Liu Y, Zhu D, Zeng YB, Yu HB. Development of microelectrodes for electrochemical micromachining. Int J Adv Manuf Technol 2011; 55(1-4): 195-203.
[24]
Wang YF, Zeng YB, Qu NS, Zhu D. Electrochemical etching of cylindrical nanoprobes using a vibrating electrolyte. RSI 2015; 86(7): 076103.
[25]
Kamaraj AB, Sundaram MM. Mathematical modeling and verification of pulse electrochemical; micromachining of microtools. Int J Adv Manuf Technol 2013; 68(5-8): 1055-61.
[26]
He JF, Guo ZN, Lian HS, He CY, Luo HP. Experimental research and simulation of tip effect in electrochemical machining. Modular Mach Tool Auto MFRG Technique 2014; 7: 136-8.
[27]
Zhang L. Study on key techniques of electrochemical machining of micro-array group electrode group holes. MA Dissertation, Zhejiang University of Technology, Zhejiang, China, March 2015.
[28]
Zhang H. Research on the electrical discharge grinding device of micro electrode and the stability of wire conveying system. MA Dissertation, Harbin Institute of Technology, Harbin, China, July 2013.
[29]
Guo S, Luo HP, Guo ZN. Research progress on on-line machining technology of microelectrodes. MFRG Technol Mach Tool 2011; 8: 73-8.
[30]
Wang ZL, Zhang XD. On-line machining and detection of electrodes in micro EDM. Electromachining Mould 2000; 3: 13-6.
[31]
Geng CM, Zhao WS, Liu JC. Tangential feed method for precision EDM grinding. MFRG Technol Mach Tool 2001; 7: 35-7.
[32]
Jie F, Zhang LX, Wu ZQ, Liu GM, Zhang YB. Research on constant tension fuzzy control of wire electrode in wire electrode grinding system. MFRG Technol Mach Tool 2011; 3: 26-9.
[33]
Zhang Y, Wang ZL, Hu FQ, Jia BX, Li ZY, Zhao WS. Research on machining and detection technology of microelectrodes in micro EDM. MFRG Technol Mach Tool 2004; 8: 97-9.
[34]
Zhao WS, Wei HY, Di SC, Ma J. Research progress of micro EDM. Instrumentation 1996; S1: 65-9.
[35]
Dong P. Design and experimental research of micro electrochemical machining detection system based on LabVIEW. MA Dissertation, Shandong University of Technology, Shandong, China, March 2014.
[36]
Wang YK, He XL, Zeng ZQ, Wang ZL. Compound machining method of EDM and electrochemical. CN102528188 (2012).
[37]
Xie J, Zhang ZR, Zhang HJ, et al. On-line machining method for micro electrode. CN103878454 (2014).
[38]
Li YM, Zhao LQ, Li JJ, et al. Tool electrode processing technology and method for processing micropores by using the tool electrode. CN104874876 (2015).
[39]
Wang YG, Li XP, Wu MH, Wang Z. An on-line grinding device for micro EDM electrode and its application method. CN106001801 (2017).
[40]
Wang YK, Chen X, He XL, Wang ZL, Geng XS. On-line machining method of micro tool electrode based on micro-arc oxidation for sidewall insulation. CN104227156 (2014).
[41]
Mohri N, Tani T. Microshaft forming method, microshaft formed by this method, and microshaft forming apparatus. WO2007058110 (2007).
[42]
Hu QF, Xu JH. Correction device for spark electrode. CN2023776277 (2012).
[43]
Peng LQ, Yi FY, Zhang JF, Han Y. Method for manufacturing extremely long profiled micro electrode for electric discharge machining. CN1778505 (2006).
[44]
Wu XY, Xu B, Liang X, Luo F, Peng T. Method for manufacturing three-dimensional micro electric spark electrode. CN103084676 (2013).
[45]
Pei JY, Zheng BW, He L, Jing FJ, Wang ZL. Wire electrode grinding device. CN103264338 (2013).
[46]
Bai JC, Zhu GZ, Wang YQ, et al. Wire electrode grinding device for making electrode by micro spark in line. CN103659525 (2014).
[47]
Chen J, Chen X, Song L. A micro EDM parallel processing method based on tungsten electrode. CN104803344 (2015).
[48]
Chen J, Chen X. Method for preparing high aspect ratio micro spark array electrode. CN104909335 (2015).
[49]
Wu ZQ, Zhang YB, Ke R, Yang ZJ, He JG, Zhang LX. In situ machining and dressing device for micro tool electrode. CN105710465 (2016).
[50]
Prashant T, Florian S. High aspect ratio microelectrode arrays enabled to have customizable lengths and methods of making the same. US20120138335 (2012).
[51]
Yang XD, Wu ZB, Chi GX. On line electrical discharge machining device for micro array electrode and array hole based on electrostatic induction power supply. CN101885094 (2010).
[52]
Zhang YB, Wang XK, Ji F, He JG, Wu ZQ, Liu GM. Miniature dual function wire electrode grinding device. CN102601707 (2012).
[53]
Tong H, Li Y, Zhang L. Rotary feed and composite drives spindle mechanism for micro-EDM machining. CN102513626 (2012).
[54]
Zhao WS. On-line manufacturing method of microelectrodes based on edge electrode micro-EDM grinding. CN1864922 (2006).
[55]
Wang MH, Gong B, Tong WJ, Xu XF. Device for machining electrolytically processed micro array electrode of pressure type circulating jet. CN207534111 (2018).
[56]
Wang MH, He ZW, Zhang L, Yao CY, Zhang QF, Peng W. Method and device for preparing array micro group electrodes based on cathode optimization. CN104001998 (2014).
[57]
Zeng YB, Wang YF, Qu NS, Zhu D. On-line machining of micro group wire electrodes. CN103521864 (2014).
[58]
He HD, Qu NS, Zeng YB. Flexible on-line machining of micro group wire electrode. CN105108250 (2015).
[59]
Wu XY, Lei JG, Zhong JM, Xu B, Guo DJ, Ruan SC. Machining method and device for micro electrochemical machining tool electrode. CN106424984 (2017).
[60]
Ji H, Cang CW, Li ZY. A method of fine tungsten electrode prepared cylinder. CN103831492 (2014).
[61]
Wu XY, Lei JG, Guo DJ, Xu B, Wu CZ, Jiang K. Conductive film electrochemical machining tool electrode and manufacturing method and manufacturing device thereof. CN106825801 (2017).
[62]
Wang MH, Peng W, Zhang QF. Electrochemical machining of large diameter ratio disk array array electrodes. CN104511669 (2017).
[63]
Liu Y, Guo CS, Li MH. Online electrochemical machining device and method for high-rotation precision micro-column electrode. CN105312692 (2016).
[64]
Shen LD, Wang GF, Gao XS, et al. Electrochemical machining array electrode. CN102357689 (2012).


Rights & PermissionsPrintExport Cite as


Article Details

VOLUME: 12
ISSUE: 1
Year: 2019
Page: [14 - 24]
Pages: 11
DOI: 10.2174/2212797612666181217101540
Price: $58

Article Metrics

PDF: 37
HTML: 4
EPUB: 1
PRC: 1