Current Nanoscience

Back

A Novel Method for Fabricating Fe-Cr-Al Open-cell Metallic and Alloyed Foams

Author(s): Luong-Huu Bac, Byoung-Kee Kim, Young-Min Kong.

Abstract:

A new fabrication process for generating open-cell metallic and alloyed foams was developed by combining electrical explosion of wire (EEW) and electrospray (ESP) techniques. Fe-Cr-Al alloy nano-powders prepared by EEW in ethanol were used as a starting material, and commercial polyurethane (PU) sponges were used as templates. Fe-Cr-Al foams were successfully fabricated with porosities greater than 90%. The porosity of the fabricated foams was controlled by spraying time during the ESP process. As spraying time increased from 1 to 5 h, porosity decreased from 97 to 90%. The sintered foam possessed a continuous open-cell structure, which was dependent on the structure of the PU template. The proposed method may be useful in the future as a simple means to fabricate open-cell porous materials.

Keywords: Electrical Explosion of Wire (EEW), Electrospray (ESP), Foams, Metallic and alloyed, Open-cell, Porous materials.

Order Reprints Order Eprints Rights & PermissionsPrintExport

Article Details

VOLUME: 10
ISSUE: 1
Year: 2014
Page: [86 - 88]
Pages: 3
DOI: 10.2174/1573413709666131112001004